|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] XEN 4.0 and dual interfaces
Short Version;
Need documentation on second interface in for Xen4.0 on debian squeeze
for hvm and paravirt domU's.
Long Version;
I am looking for something definitive on multi-network configurations in
xen 4.0. I have tried both of these;
http://wiki.debian.org/Xen#Dom0_.28host.29
and
http://searchservervirtualization.techtarget.com/tip/Creating-additional-Xen-virtual-network-bridges
I can create the interface after it is booted with this command;
./network-bridge netdev=eth1 bridge=xenbr1 start
and it gives me a bridge;
root@xen-07:/var/log/xen# brctl show
bridge name bridge id STP enabled interfaces
eth0 8000.0026b9fedf98 no peth0
xenbr1 8000.0026b9fedf9a no peth1
tap7.0
vif7.0
But my domU's can not see that interface.
Finally on the xen wiki I found this but I am unsure what it means;
vif = [
'mac=00:16:5e:72:04:01,bridge=xenbr0,script=your_custom_script1',
'mac=00:16:5e:72:04:02,bridge=xenbr1,script=your_custom_script2' ]
Mostly because I never get a xenbr0 here is my ifconfig print out;
root@hou-xen-07:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:26:b9:fe:df:98
inet addr:10.0.14.153 Bcast:10.0.14.255 Mask:255.255.255.0
inet6 addr: fe80::226:b9ff:fefe:df98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:171813 errors:0 dropped:0 overruns:0 frame:0
TX packets:15362 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22392933 (21.3 MiB) TX bytes:2287966 (2.1 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8483 errors:0 dropped:0 overruns:0 frame:0
TX packets:8483 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1103730 (1.0 MiB) TX bytes:1103730 (1.0 MiB)
peth0 Link encap:Ethernet HWaddr 00:26:b9:fe:df:98
inet6 addr: fe80::226:b9ff:fefe:df98/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:219181 errors:0 dropped:0 overruns:0 frame:0
TX packets:40454 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:82814249 (78.9 MiB) TX bytes:4307386 (4.1 MiB)
Interrupt:36 Memory:da000000-da012800
peth1 Link encap:Ethernet HWaddr 00:26:b9:fe:df:9a
inet6 addr: fe80::226:b9ff:fefe:df9a/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:57686 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3789122 (3.6 MiB) TX bytes:1476 (1.4 KiB)
Interrupt:48 Memory:dc000000-dc012800
tap7.0 Link encap:Ethernet HWaddr 3a:e1:76:b6:69:7f
inet6 addr: fe80::38e1:76ff:feb6:697f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:21534 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:1253292 (1.1 MiB)
vif7.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:21534 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
xenbr1 Link encap:Ethernet HWaddr 00:26:b9:fe:df:9a
inet addr:10.0.11.87 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::226:b9ff:fefe:df9a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:57164 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2526816 (2.4 MiB) TX bytes:468 (468.0 B)
I am sure it is not working ... cause I am not doing it right. Any help
would be appreciated.
I currently run debian squeeze and xen4.0.
regards,
E./
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] XEN 4.0 and dual interfaces,
EredicatorX <=
|
|
|
|
|