|  |  | 
  
    |  |  | 
 
  |   |  | 
  
    |  |  | 
  
    |  |  | 
  
    |   xen-users
[Xen-users] XCP - VLAN Issues 
| I have an issue with VLANs that was in XCP 1.0.0 and also persisted after the upgrade to XCP 1.1.beta  Currently the server has 2 network cards: 
 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 05)
 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
 
 eth0 is the designated as the management interface and is connected to a port on VLAN 193
 eth1 is the interface used by the VM's and is connected to a trunked switch port to provide VLAN access to the VM's
 
 Before moving eth1 to a trunked port without vlanning I could ping it's ip address and ssh to it.  After moving it to the trunked port I have no connectivity to it whatsoever.  The only way I can get a response from it is to ping the static IP on the local machine.  The VM's are using the interface on the created VLANS almost perfectly however they sometimes exhibit strange behaviour such as loss of connectivity when connecting to another machine crossing over a vlan.
 
 I setup my vlans using the XenServer guide here is the output of pif-list:
 
 **********************************************************************************
 xe pif-list
 uuid ( RO)                  : 3ebae448-8520-1d92-32b8-322be6018909
 device ( RO): eth0
 currently-attached ( RO): true
 VLAN ( RO): -1
 network-uuid ( RO): 0eb1efb3-60c4-f754-ccee-607ea7419524
 
 
 uuid ( RO)                  : 32ab2f2a-601e-766e-d71b-9ca1d7e6339f
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): 200
 network-uuid ( RO): cef0cc98-274d-102f-4441-7327c888dcd2
 
 
 uuid ( RO)                  : d14427c2-4940-0db1-7d96-f55434af319e
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): 201
 network-uuid ( RO): 85a9aba5-73ea-4008-0a28-395c96be30fd
 
 
 uuid ( RO)                  : e602777f-b4e9-e231-7858-81189c47c434
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): -1
 network-uuid ( RO): df87728a-e4a7-a16e-9f8c-c4c4c26dc35f
 
 
 uuid ( RO)                  : 753ee4aa-d286-b66b-d0c0-8c212ac0cca5
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): 193
 network-uuid ( RO): 7abbb9eb-2507-9a16-c547-2f3dd02bc1d9
 
 
 uuid ( RO)                  : 2fa498da-1749-2822-b194-bf2890491533
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): 194
 network-uuid ( RO): 54a0217e-e659-8fc6-7a5c-fef685fe9d7a
 
 
 uuid ( RO)                  : b80d7974-cc00-9db4-213e-e1df3a51f2a8
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): 207
 network-uuid ( RO): 0af4cb48-83e4-b417-cb5d-9df528dd587a
 
 
 uuid ( RO)                  : 2934f6a4-1d80-ad36-96a4-5962f669c4f9
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): 795
 network-uuid ( RO): 2ce5fe35-ea10-e1a7-c9e3-4f5bfd5c55ab
 *********************************************************************************
 
 I suspected that the issue may lie here:
 
 ************************************************************************************
 uuid ( RO)                  : e602777f-b4e9-e231-7858-81189c47c434
 device ( RO): eth1
 currently-attached ( RO): true
 VLAN ( RO): -1
 network-uuid ( RO): df87728a-e4a7-a16e-9f8c-c4c4c26dc35f
 ************************************************************************************
 
 where the eth1 interface is assigned a VLAN value of -1 when it should be on the 201 network.  When I try to do
 
 xe pif-param-set uuid=e602777f-b4e9-e231-7858-81189c47c434 VLAN=201
 
 I get:
 
 Error: Field 'VLAN' is read-only.
 
 How can I assign the interface to the correct VLAN so I can use it again for traffic to the server?
 
 
 
 
 _______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users | 
 
| <Prev in Thread] | Current Thread | [Next in Thread> |  | 
[Xen-users] XCP - VLAN Issues,
Ronny Bull <=
 |  |  | 
  
    |  |  |