Hi,
Ensure this path is correct:
'phy:/dev/europe_storage/bill-wdisk,hda,w',
Also if you aren't using the QEMU ioemu driver make sure you have
PVonHVM drivers installed or GPLPV if this is a Windows guest.
Is there any error output when you try to start the domain?
Joseph.
On 14 May 2011 22:30, Asistar srl Ivan Bolognani <bolognani@xxxxxxxxxx> wrote:
> My config file is:
>
> ******************
> kernel = 'hvmloader'
> builder = 'hvm'
> memory = 512
> shadow_memory = 8
> name = "bill"
> device_model = 'qemu-dm'
> boot = 'dc'
> sdl = 0
> vnc = 1
> stdvga = 0
> vnclisten = '192.168.0.181'
> # vfb = [
> # 'type=vnc,'
> # 'vncdisplay=1,'
> # 'vncpasswd=foo'
> # ]
> # http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=585
> usbdevice = "tablet"
> # serial = 'pty'
>
> disk = [
> 'phy:/dev/europe_storage/bill-wdisk,hda,w',
> ]
> vif = [
> (
> 'type=ioemu,'
> 'ip=10.0.1.42,'
> 'bridge=eth1,'
> 'script=vif-bridge,'
> 'vifname=bill.0,'
> 'mac=00:16:3f:d5:f4:31'
>
> )
> ]
> on_poweroff = 'destroy'
> on_reboot = 'restart'
> on_crash = 'destroy'
> ****************
>
>
>
>
>
> Il 14/05/11 14:25, "Joseph Glanville" <joseph.glanville@xxxxxxxxxxxxxx> ha
> scritto:
>
>> Hi,
>>
>> Can you post the config file?
>>
>> Joseph.
>>
>> On 14 May 2011 21:59, Asistar srl Ivan Bolognani <bolognani@xxxxxxxxxx>
>> wrote:
>>> Good morning
>>>
>>> I followed the instructions,
>>> I moved the image with command dd,
>>> I moved on server 2 file.cfg and after on server 2 I typed xm create
>>> file.cfg
>>>
>>> but will not start anything
>>>
>>> I must moved from server 1 to server 2 1 virtual machine wit windows 2003
>>> and 2 virtual machine with debian
>>>
>>>
>>>
>>> Il 13/05/11 17:55, "Joseph Glanville" <joseph.glanville@xxxxxxxxxxxxxx> ha
>>> scritto:
>>>
>>>> Hi,
>>>>
>>>> If the devices are in /dev/mapper you are probably using LVM.
>>>> You can use these commands to move the disks to server2 substituting
>>>> in the names of the LVM logical volume names.
>>>>
>>>> # copy the LV to an image file
>>>> dd if=/dev/mapper/<vgname>-<lvname> of=/tmp/<vmname>.img bs=1M
>>>>
>>>> #transfer the image file
>>>> scp <user>@server2:/tmp/<vmname>.img
>>>>
>>>> #create a new LV assuming the volume group is already setup
>>>> lvcreate -n<lvname> -L<sizeofdisk> <vgname>
>>>>
>>>> #copy the image onto the newly created lv
>>>> dd if=/tmp/<vmname>.img of=/dev/mapper/<vgname>-<lvname>
>>>>
>>>> You should now be able to start the VM with the same configuration
>>>> file assuming networking etc is setup the same as server1.
>>>>
>>>> Joseph.
>>>>
>>>>
>>>> On 14 May 2011 01:38, Ivan Bolognani <bolognani@xxxxxxxxxx> wrote:
>>>>> Good morning.
>>>>>
>>>>> I have a question can you help me?
>>>>>
>>>>> I must migrate a virtual machine from server1 to server2 but I do not
>>>>> know
>>>>> where to start
>>>>>
>>>>> files are all in / dev / mapper / but I do not understand how to move
>>>>>
>>>>> Can you help me posting the procedure to do to migrate the virtual server
>>>>>
>>>>> Sorry for my english
>>>>> Thanks
>>>>> Ivan
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Xen-users mailing list
>>>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>>>> http://lists.xensource.com/xen-users
>>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Xen-users mailing list
>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-users
>>>
>>
>>
>
>
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
--
Kind regards,
Joseph.
Founder | Director
Orion Virtualisation Solutions | www.orionvm.com.au | Phone: 1300 56
99 52 | Mobile: 0428 754 846
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home