--- On Wed, 5/11/11, Francisco Barrera <francisco.barrera@xxxxxxxxx> wrote:
From: Francisco Barrera <francisco.barrera@xxxxxxxxx>
Subject: Re: [Xen-users] pcifront problem in Ubuntu 10.04 domU
To: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Wednesday, May 11, 2011, 9:29 AM
Hello Mark,
I don't really understand your first question.
If it is related with if I use pygrub or dom0 kernel files in the config file
from domU, the response is not, I use pygrub.
For the second question, I use this kernel because in dom0 I use CentOS,not
Ubuntu.
Hope this clarify your questions.
Besides I told in the first mail, I review dmesg in domU, and the result it
looks ok:
[ 2.036868] pcifront pci-0: Creating PCI Frontend Bus 0000:00
[ 2.037494] pci 0000:00:00.0: [14e4:164c] type 0 class 0x000200
[ 2.038642] pci 0000:00:00.0: reg 10: [mem 0xd2000000-0xd3ffffff 64bit]
[ 2.042682] pci 0000:00:00.0: PME# supported from D3hot D3cold
[ 2.042731] pci 0000:00:00.0: PME# disabled
[ 2.045954] Initialising Xen virtual ethernet driver.
[ 2.142451] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 2.151373] pcifront pci-0: claiming resource 0000:00:00.0/0
[ 2.210242] lp: driver loaded but no devices found
[ 2.261647] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.18
(Oct 7, 2010)
[ 2.261772] bnx2 0000:00:00.0: enabling device (0000 -> 0002)
[ 2.262184] bnx2 0000:00:00.0: Xen PCI enabling IRQ: 19
[ 2.340687] bnx2 0000:00:00.0: eth1: Broadcom NetXtreme II BCM5708
1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d2000000, IRQ 19, node addr
00:10:18:39:9a:f0
Thanks very much.
------------------------------
Try using the linux-image-virtual kernel from standard lucid repos, not the
generic kernel from natty-ppa.
El mié, 11-05-2011 a las 08:47 -0700, Mark Pryor escribió:
--- On Wed, 5/11/11, Francisco Barrera <francisco.barrera@xxxxxxxxx> wrote:
From: Francisco Barrera <francisco.barrera@xxxxxxxxx>
Subject: [Xen-users] pcifront problem in Ubuntu 10.04 domU
To: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Wednesday, May 11, 2011, 5:10 AM
Hi all,
I have a problem when from domU I need to configure a network interface.
Kernel driver in use: pciback
Kernel modules: bnx2
domU: paravirtual Ubuntu 10.04 with 2.6.37-020637-generic kernel
Apparently works fine, because I execute from dom0 when domU is created "xm
pci-list Ubuntu" and the result is:
domain bus slot func
0x0000 0x09 0x00 0x0
and from domU I execute lspci, it returns:
00:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit
Ethernet (rev 12)
-------------------
You are using a PPA kernel from dom0. Did you copy over the modules to domU?
What does the PPA kernel provide you that the Lucid kernel can't?
--
Mark
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home