While this might not be the problem, on anything older than Vista, 7,
2008/2008R2, you're going to have to manually tweak your TCP stack to
get decent speeds. This includes 2003/2003 R2. The new autotuning
TCP stack isn't in it.
-Dustin
On Mon, Mar 28, 2011 at 8:37 AM, Olivier Cant <olivier@xxxxxxxxxx> wrote:
> Hi,
>
> I'm having some real hard time with the gplpv driver and Windows2k3 DomU on
> xen 4.0
>
> This is a xen 4 install from debian squeeze withour much changes in the
> configuration
>
> I've install the gplpv driver in the DomU, everything seems to work fine but
> I'm having slow data transfert between two windows DomU (even on the same
> physical host). I barely reach 100Mbps on a Gbit interface (usualy around 8
> - 10 MBytes / s).
>
> I have read quite a lot on this "issue" on the list and various other
> sources. I have tried to disable "Checksum offload" and "Large Send
> Offload" in the DomU but nothing changed.
>
> By the way, this doesn't affect the Linux DomU (I get full Gbit data speed
> there)
>
> I'm running out of ideas, any advice would be much appreciated.
>
> Below is my DomU config file and network configuration :
>
> Cheers
>
> Olivier
>
> DomU :
> kernel = "/usr/lib/xen-4.0/boot/hvmloader"
>
> builder='hvm'
> acpi=1
> apic=1
> vcpus = 8
>
> memory = 12288
> shadow_memory = 8
> name = "patologix"
> vif = [ 'type=paravirtualized, bridge=eth0' ]
> disk = [
> 'phy:/dev/datastore1/patologix-hda,hda,w',
> 'phy:/dev/datastore1/patologix-hdb,hdb,w',
> 'phy:/dev/datastore1/patologix-hdd,hdd,w',
> 'phy:/dev/datastore1/patologix-hde,hde,w',
>
> #
> 'file:/mnt/SW_CD_Windows_Svr_Std_2003_R2_32-BIT_X64_English_ISO_x64_1_MLF_X13-73750.ISO,hdc:cdrom,r',
>
> ]
> device_model = '/usr/lib64/xen-4.0/bin/qemu-dm'
>
> # boot on floppy (a), hard disk (c) or CD-ROM (d)
> # default: hard disk, cd-rom, floppy
> boot="dc"
>
> vfb = [
> 'type=vnc,vncdisplay=19,vncpasswd=s3cr3t,vnclisten=0.0.0.0,keymap=fr' ]
>
>
> #sdl=0
> #vnc=1
> #vncconsole=1
> #vncpasswd=''
> stdvga=0
> serial='pty'
> usbdevice='tablet'
>
> in my xend-config.sxp the network configuration looks like :
>
> (network-script network-bridge)
>
> and the bridge configured on the server :
> root@furax:~# brctl show
> bridge name bridge id STP enabled interfaces
> eth0 8000.0025900ce62c no peth0
> vif10.0
> vif12.0
> vif15.0
> vif17.0
> vif20.0
> vif3.0
> vif4.0
> vif6.0
> vif7.0
> vif8.0
> vif9.0
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home