On Fri, Mar 25, 2011 at 11:08, Melody Bliss <melodybliss@xxxxxxxxx> wrote:
> On Thu, Mar 24, 2011 at 8:54 PM, Pandu Poluan <pandu@xxxxxxxxxxx> wrote:
>> On Fri, Mar 25, 2011 at 10:50, Melody Bliss <melodybliss@xxxxxxxxx> wrote:
>>> Hrm. Interesting.
>>>
>>> I believe hvc0 is your console on this VM and it looks like a getty is
>>> running.
>>>
>>> Have you tried killing the agetty on hvc0 (process 4143). It should
>>> respawn. If it doesn't, send a -HUP signal to init. That should force
>>> init to re-read /etc/inittab and respawn missing processes.
>>>
>>
>> No joy.
>
> hrm
>
>> The console indeed shows agetty restarting by emitting a new set of
>> lines "This is bla bla bla ... login:"
>>
>> But still no keyboard input.
>>
>>> You may need to trace the getty process and see what it's doing at the time.
>>>
>>
>> Uhh... trace? You went over my head there... :-P
>
> You can use strace (if it's installed) to see what a running process
> is doing. An example on my subversion server.
>
> (via ssh to svn)
>
> --- 8< cut >8 ---
> [root@svn ~]# ps auxww | grep getty
> root 27371 0.0 0.1 3804 544 xvc0 Ss+ 04:08 0:00
> /sbin/agetty xvc0 9600 vt100-nav
> root 27409 0.0 0.1 61156 716 pts/0 R+ 04:14 0:00 grep getty
> [root@svn ~]# strace -p 27371
> Process 27371 attached - interrupt to quit
> read(0, "\r", 1) = 1
> uname({sys="Linux", node="svn.home.chezbliss.com", ...}) = 0
> write(1, "\r\n", 2) = 2
> open("/etc/issue", O_RDONLY) = 3
> ...
> ...
> uname({sys="Linux", node="svn.home.chezbliss.com", ...}) = 0
> write(1, "svn.home.chezbliss.com", 22) = 22
> write(1, " login: ", 8) = 8
> --- 8< cut >8 ---
>
> The above was generated when I hit the enter key on the console
>
> --- 8< cut >8 ---
> [root@shark ~]# xm console svn
>
> CentOS release 5.5 (Final)
> Kernel 2.6.18-194.26.1.el5xen on an x86_64
>
> svn.home.chezbliss.com login:
> --- 8< cut >8 ---
>
> This way, you can see exactly what the getty process is doing (or not
> doing). From the sounds of it, it sounds like the device driver may
> have a bug in it where it isn't correctly attaching to the input
> stream. Unfortunately I don't know enough about the Xen console driver
> internals to be able to point you to a solution to the problem, but
> using strace may give some idea of where to start.
>
The bad news is 'emerge strace' failed horribly on my system :(
I just tried 'emerge mingetty' and replace the hvc0 agetty with
mingetty. Although mingetty managed to capture hvc0, still the same
'keyboard not responsive' problem.
I strongly suspect a kernel misconfig on my part, though. dmesg does
not indicate anything related to keyboard, while it indicates mice
being found.
I'll try mucking up the kernel config
> Mel
>
> [...]
>
>
> --
> Melody Bliss
> Usenix, SAGE and LOPSA Charter Member
> Patron Member of the NRA
>
--
Pandu E Poluan
~ IT Optimizer ~
Visit my Blog: http://pepoluan.posterous.com
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home