| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] XCP resource pool
Each physical node gets a PIF. Each
VM gets a VIF. When a VM is migrated from one physical node to another,
XCP will automatically route the network traffic from the VM’s VIF
through the correct PIF using the virtual network switching. After the
initial configuration, you can pretty much just ignore the PIF information and let XCP do
its magic. You don’t need to manually connect a VM to a PIF.
Connect the VM using a VIF.
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of inas mohamed
Sent: Monday, January
03, 2011 11:46 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx;
admin@xxxxxxxxxxx
Subject: RE: [Xen-users] XCP
resource pool
|
Thanks soo much, but as I said before I am very new and by
the time I am finding that my question is tooo .......:(
I read many forums and guides on XCP and VMs and I found
that many VDIs can be created on the same storage repository for our VMs.
But regarding vifs, now as a said before I installed
XCP on 5 servers and created a resource pool and all my servers joined that
pool and when I try:
# xe network-list bridge=xenbr0 params=uuid
--minimal
I am getting one network uuid but if I said:
I got 5 NICs all are eth0, each have a different uuid but
all have the same network uuid
So, I am asking why when
we are creating a vif we are using the network uuid not the pif uuid to say
the traffic of this VM has to go through this NIC??
may be it is another ....
question.but it is my question :)
--- On Mon, 1/3/11,
admin@xxxxxxxxxxx <admin@xxxxxxxxxxx> wrote:
From: admin@xxxxxxxxxxx <admin@xxxxxxxxxxx>
Subject: RE: [Xen-users] XCP resource pool
To: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Monday, January 3, 2011, 9:58 PM
No, you can create on
SR and store all of your VMs on that SR. For example, if you use an NFS
target for your VHD files, all of your VMs could share that SR.
You don’t need to
assign a separate PIF for each VM. In fact, most people
won’t. You will assign a separate VIF for each VM and then XCP
can route the VIFs through a shared PIF.
-----Original
Message-----
From:
xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of inas mohamed
Sent: Monday, January
03, 2011 12:55 AM
To:
xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] XCP
resource pool
|
Hi,
I am very new to XCP , and I
have couple of questions to make things clear.
After creating a resource pool:
Do I have to create a SR for
each VM, if I needed to assign 100GB HDD for this VM??
Do I have to assign a pif for
each VM to distribute the traffic over my hosts NICs or the master will
handle this??
Thanks so much for any help
|
-----Inline Attachment Follows-----
|
|
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home