RE: [Xen-users] XCP 1.0 Beta - Boot-from-SAN with multipathing - howto?

[Rob Hoes <Rob.Hoes@xxxxxxxxxx>]

Hi Pekka,

 

The CPU masking functionality should be available in XCP 1.0 (in fact, already in 0.5). If you try to use those commands, what happens?

 

Thanks,

Rob

 

From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Pekka.Panula@xxxxxxxx
Sent: 20 December 2010 11:03
To: Jonathan Ludlam
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] XCP 1.0 Beta - Boot-from-SAN with multipathing - howto?

 

Thx

Another feature that i am missing from XCP, that is included in XenServer 5.6 FP 1, is xe commands host-get-cpu-features/host-set-cpu-features.
Should those be XCP features? Those can be used to include new servers with newer generation CPUs to join pool with different CPU features.

Is this feature planned also for XCP?

Terveisin/Regards,
  Pekka Panula, Sofor Oy - Jatkuvat palvelut



Jonathan Ludlam <Jonathan.Ludlam@xxxxxxxxxxxxx> wrote on 17.12.2010 14:30:51:

> From: Jonathan Ludlam <Jonathan.Ludlam@xxxxxxxxxxxxx>
> To: "<Pekka.Panula@xxxxxxxx>" <Pekka.Panula@xxxxxxxx>
> Cc: Pasi Kärkkäinen <pasik@xxxxxx>, Xen List <xen-users@xxxxxxxxxxxxxxxxxxx>
> Date: 17.12.2010 14:31
> Subject: Re: [Xen-users] XCP 1.0 Beta - Boot-from-SAN with
> multipathing - howto?
>
> This a bug then. We'll look into it. Thanks for reporting it!
>
> Jon
>
> On 17 Dec 2010, at 12:16, <Pekka.Panula@xxxxxxxx> wrote:
>
> Hi
>
> I did, it works there but not under XCP 1.0 Beta.
>
> Terveisin/Regards,
>   Pekka Panula, Sofor Oy - Jatkuvat palvelut
>
>
>
> Pasi Kärkkäinen <pasik@xxxxxx> wrote on 17.12.2010 13:52:43:
>
> > From: Pasi Kärkkäinen <pasik@xxxxxx>
> > To: Pekka.Panula@xxxxxxxx
> > Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> > Date: 17.12.2010 13:52
> > Subject: Re: [Xen-users] XCP 1.0 Beta - Boot-from-SAN with
> > multipathing - howto?
> >
> > On Fri, Dec 17, 2010 at 11:27:46AM +0200, Pekka.Panula@xxxxxxxx wrote:
> > >    Hi
> > >
> > >    How can i enable this feature because:
> > >    Running /opt/xensource/libexec/mpp-rdac --enable it says:
> > >    No module mppUpper found for kernel 2.6.32.12-0.7.1.xs1.0.0.
> > 298.170582xen,
> > >    aborting.
> > >
> > >    There is no MPP modules...
> > >
> >
> > Did you try with XenServer 5.6 FP1? It was released two days ago.
> > Maybe worth a try..
> >
> > -- Pasi
> >
> <ATT00001..txt>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users