[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.15-xen4 (root@dom0) (gcc version 4.5.1 (GCC) ) #22 SMP Mon Nov 8 14:11:55 BRST 2010 [ 0.000000] Command line: root=/dev/sda2 ro i915.modeset=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] Xen: 000000000009c000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] Xen: 00000000cdefb000 - 00000000cdfbe000 (ACPI NVS) [ 0.000000] Xen: 00000000cf292000 - 00000000cf294000 (reserved) [ 0.000000] Xen: 00000000cf38b000 - 00000000cf3e5000 (ACPI NVS) [ 0.000000] Xen: 00000000cf3eb000 - 00000000cf3f2000 (ACPI data) [ 0.000000] Xen: 00000000cf3f3000 - 00000000cf3ff000 (ACPI data) [ 0.000000] Xen: 00000000cf400000 - 00000000d0000000 (reserved) [ 0.000000] Xen: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009c000 (usable) [ 0.000000] modified: 000000000009c000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] modified: 00000000cdefb000 - 00000000cdfbe000 (ACPI NVS) [ 0.000000] modified: 00000000cf292000 - 00000000cf294000 (reserved) [ 0.000000] modified: 00000000cf38b000 - 00000000cf3e5000 (ACPI NVS) [ 0.000000] modified: 00000000cf3eb000 - 00000000cf3f2000 (ACPI data) [ 0.000000] modified: 00000000cf3f3000 - 00000000cf3ff000 (ACPI data) [ 0.000000] modified: 00000000cf400000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000 [ 0.000000] 0000000000 - 0080000000 page 4k [ 0.000000] kernel direct mapping tables up to 80000000 @ 100000-503000 [ 0.000000] RAMDISK: 01acf000 - 01f1b400 [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 00000000cf3fd038 00058 (v01 INTEL DG33TL 0000019D 01000013) [ 0.000000] ACPI: FACP 00000000cf3fc000 00074 (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: DSDT 00000000cf3f8000 03DAD (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: FACS 00000000cf396000 00040 [ 0.000000] ACPI: APIC 00000000cf3f7000 00078 (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: WDDT 00000000cf3f6000 00040 (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: MCFG 00000000cf3f5000 0003C (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: ASF! 00000000cf3f4000 000A6 (v32 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: HPET 00000000cf3f3000 00038 (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: ASPT 00000000cf3f1000 0002C (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: WDTT 00000000cf3f0000 002CC (v01 INTEL DG33TL 0000019D MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cf3ef000 00204 (v01 INTEL CpuPm 0000019D MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cf3ee000 000DD (v01 INTEL Cpu0Cst 0000019D MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cf3ed000 000DD (v01 INTEL Cpu1Cst 0000019D MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cf3ec000 000DD (v01 INTEL Cpu2Cst 0000019D MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000cf3eb000 000DD (v01 INTEL Cpu3Cst 0000019D MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0080000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000231d000 - 0002332000] XEN PAGETABLES ==> [000231d000 - 0002332000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001aae9f8] TEXT DATA BSS ==> [0001000000 - 0001aae9f8] [ 0.000000] #4 [0001acf000 - 0001f1b400] RAMDISK ==> [0001acf000 - 0001f1b400] [ 0.000000] #5 [0001f1c000 - 000231d000] XEN START INFO ==> [0001f1c000 - 000231d000] [ 0.000000] #6 [0001aaf000 - 0001aaf19e] BRK ==> [0001aaf000 - 0001aaf19e] [ 0.000000] #7 [0000100000 - 00004eb000] PGTABLE ==> [0000100000 - 00004eb000] [ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] On node 0 totalpages: 524183 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1006 pages reserved [ 0.000000] DMA zone: 2929 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:4defb000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880002345000 s88600 r8192 d21992 u118784 [ 0.000000] pcpu-alloc: s88600 r8192 d21992 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] trying to map vcpu_info 0 at ffff880002350050, mfn 222350, offset 80 [ 0.000000] cpu 0 using vcpu_info at ffff880002350050 [ 0.000000] trying to map vcpu_info 1 at ffff88000236d050, mfn 22236d, offset 80 [ 0.000000] cpu 1 using vcpu_info at ffff88000236d050 [ 0.000000] trying to map vcpu_info 2 at ffff88000238a050, mfn 22238a, offset 80 [ 0.000000] cpu 2 using vcpu_info at ffff88000238a050 [ 0.000000] trying to map vcpu_info 3 at ffff8800023a7050, mfn 2223a7, offset 80 [ 0.000000] cpu 3 using vcpu_info at ffff8800023a7050 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516009 [ 0.000000] Kernel command line: root=/dev/sda2 ro i915.modeset=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880004333000 - ffff880008333000 [ 0.000000] DMA: software IO TLB at phys 0x4333000 - 0x8333000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880004333000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880008393000 size=32768 [ 0.000000] Memory: 1974156k/2097152k available (5257k kernel code, 420k absent, 121852k reserved, 3748k data, 520k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1280 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 1279 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] Detected 2388.086 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4776.17 BogoMIPS (lpj=2388086) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys freezer [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.001025] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. [ 0.001139] SMP alternatives: switching to UP code [ 0.001999] ACPI: Core revision 20090903 [ 0.011056] alloc irq_desc for 1278 on node 0 [ 0.011059] alloc kstat_irqs on node 0 [ 0.011066] alloc irq_desc for 1277 on node 0 [ 0.011069] alloc kstat_irqs on node 0 [ 0.011075] alloc irq_desc for 1276 on node 0 [ 0.011077] alloc kstat_irqs on node 0 [ 0.011082] alloc irq_desc for 1275 on node 0 [ 0.011085] alloc kstat_irqs on node 0 [ 0.011260] installing Xen timer for CPU 1 [ 0.011306] alloc irq_desc for 1274 on node 0 [ 0.011308] alloc kstat_irqs on node 0 [ 0.011337] SMP alternatives: switching to SMP code [ 0.012998] alloc irq_desc for 1273 on node 0 [ 0.012998] alloc kstat_irqs on node 0 [ 0.013005] alloc irq_desc for 1272 on node 0 [ 0.013008] alloc kstat_irqs on node 0 [ 0.013014] alloc irq_desc for 1271 on node 0 [ 0.013016] alloc kstat_irqs on node 0 [ 0.013022] alloc irq_desc for 1270 on node 0 [ 0.013024] alloc kstat_irqs on node 0 [ 0.000015] Initializing CPU#1 [ 0.000070] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000073] CPU: L2 cache: 4096K [ 0.000077] CPU: Physical Processor ID: 0 [ 0.000079] CPU: Processor Core ID: 2 [ 0.013222] installing Xen timer for CPU 2 [ 0.013467] alloc irq_desc for 1269 on node 0 [ 0.013470] alloc kstat_irqs on node 0 [ 0.013506] alloc irq_desc for 1268 on node 0 [ 0.013509] alloc kstat_irqs on node 0 [ 0.013515] alloc irq_desc for 1267 on node 0 [ 0.013518] alloc kstat_irqs on node 0 [ 0.013524] alloc irq_desc for 1266 on node 0 [ 0.013526] alloc kstat_irqs on node 0 [ 0.013535] alloc irq_desc for 1265 on node 0 [ 0.013538] alloc kstat_irqs on node 0 [ 0.000006] Initializing CPU#2 [ 0.000047] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000050] CPU: L2 cache: 4096K [ 0.000054] CPU: Physical Processor ID: 0 [ 0.000056] CPU: Processor Core ID: 1 [ 0.013685] installing Xen timer for CPU 3 [ 0.013929] alloc irq_desc for 1264 on node 0 [ 0.013931] alloc kstat_irqs on node 0 [ 0.013956] alloc irq_desc for 1263 on node 0 [ 0.013958] alloc kstat_irqs on node 0 [ 0.013965] alloc irq_desc for 1262 on node 0 [ 0.013967] alloc kstat_irqs on node 0 [ 0.013973] alloc irq_desc for 1261 on node 0 [ 0.013976] alloc kstat_irqs on node 0 [ 0.013981] alloc irq_desc for 1260 on node 0 [ 0.013984] alloc kstat_irqs on node 0 [ 0.000006] Initializing CPU#3 [ 0.000045] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000048] CPU: L2 cache: 4096K [ 0.000052] CPU: Physical Processor ID: 0 [ 0.000054] CPU: Processor Core ID: 3 [ 0.014077] Brought up 4 CPUs [ 0.015202] Grant table initialized [ 0.015202] Time: 16:43:29 Date: 11/08/10 [ 0.015222] NET: Registered protocol family 16 [ 0.016048] alloc irq_desc for 1259 on node 0 [ 0.016048] alloc kstat_irqs on node 0 [ 0.017002] ACPI: bus type pci registered [ 0.017083] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.017095] PCI: MCFG area at f0000000 reserved in E820 [ 0.042993] PCI: Using MMCONFIG at f0000000 - f7ffffff [ 0.042993] PCI: Using configuration type 1 for base access [ 0.063189] bio: create slab at 0 [ 0.065560] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.065633] ACPI: EC: Look up EC in DSDT [ 0.070744] ACPI: Interpreter enabled [ 0.070796] ACPI: (supports S0 S1 S3 S4 S5) [ 0.070969] ACPI: Using IOAPIC for interrupt routing [ 0.084392] ACPI: No dock devices found. [ 0.086579] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.086667] pci 0000:00:02.0: reg 10 32bit mmio: [0xe0380000-0xe03fffff] [ 0.086667] pci 0000:00:02.0: reg 14 io port: [0x3430-0x3437] [ 0.086667] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.086667] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe0200000-0xe02fffff] [ 0.086667] pci 0000:00:02.1: reg 10 32bit mmio: [0xe0300000-0xe037ffff] [ 0.086667] pci 0000:00:03.0: reg 10 64bit mmio: [0xe0426100-0xe042610f] [ 0.086667] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.086667] pci 0000:00:03.0: PME# disabled [ 0.086712] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0400000-0xe041ffff] [ 0.086728] pci 0000:00:19.0: reg 14 32bit mmio: [0xe0424000-0xe0424fff] [ 0.086744] pci 0000:00:19.0: reg 18 io port: [0x3400-0x341f] [ 0.086820] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.086871] pci 0000:00:19.0: PME# disabled [ 0.086986] pci 0000:00:1a.0: reg 20 io port: [0x30e0-0x30ff] [ 0.086986] pci 0000:00:1a.1: reg 20 io port: [0x30c0-0x30df] [ 0.086986] pci 0000:00:1a.2: reg 20 io port: [0x30a0-0x30bf] [ 0.086986] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0425c00-0xe0425fff] [ 0.086986] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.086986] pci 0000:00:1a.7: PME# disabled [ 0.086986] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe0420000-0xe0423fff] [ 0.086986] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.086986] pci 0000:00:1b.0: PME# disabled [ 0.086986] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.086986] pci 0000:00:1c.0: PME# disabled [ 0.086986] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.086986] pci 0000:00:1c.1: PME# disabled [ 0.086986] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.086986] pci 0000:00:1c.2: PME# disabled [ 0.086986] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.086986] pci 0000:00:1c.3: PME# disabled [ 0.087113] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.087166] pci 0000:00:1c.4: PME# disabled [ 0.087317] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f] [ 0.087455] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f] [ 0.087594] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f] [ 0.087737] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0425800-0xe0425bff] [ 0.087842] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.087894] pci 0000:00:1d.7: PME# disabled [ 0.087986] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.087986] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.087986] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.087986] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f) [ 0.087986] pci 0000:00:1f.2: reg 10 io port: [0x3428-0x342f] [ 0.087986] pci 0000:00:1f.2: reg 14 io port: [0x343c-0x343f] [ 0.087986] pci 0000:00:1f.2: reg 18 io port: [0x3420-0x3427] [ 0.087986] pci 0000:00:1f.2: reg 1c io port: [0x3438-0x343b] [ 0.087986] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f] [ 0.087986] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe0425000-0xe04257ff] [ 0.087986] pci 0000:00:1f.2: PME# supported from D3hot [ 0.087986] pci 0000:00:1f.2: PME# disabled [ 0.087986] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe0426000-0xe04260ff] [ 0.087986] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] [ 0.087986] pci 0000:03:00.0: reg 10 io port: [0x2018-0x201f] [ 0.087986] pci 0000:03:00.0: reg 14 io port: [0x2024-0x2027] [ 0.087986] pci 0000:03:00.0: reg 18 io port: [0x2010-0x2017] [ 0.087986] pci 0000:03:00.0: reg 1c io port: [0x2020-0x2023] [ 0.087986] pci 0000:03:00.0: reg 20 io port: [0x2000-0x200f] [ 0.087986] pci 0000:03:00.0: reg 24 32bit mmio: [0xe0100000-0xe01001ff] [ 0.087986] pci 0000:03:00.0: supports D1 [ 0.087986] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.087986] pci 0000:03:00.0: PME# disabled [ 0.087986] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff] [ 0.087986] pci 0000:00:1c.2: bridge 32bit mmio: [0xe0100000-0xe01fffff] [ 0.087986] pci 0000:06:00.0: reg 10 io port: [0x1000-0x10ff] [ 0.087986] pci 0000:06:00.0: reg 14 32bit mmio: [0xe0001000-0xe00010ff] [ 0.087986] pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff] [ 0.087986] pci 0000:06:00.0: supports D1 D2 [ 0.087986] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.087986] pci 0000:06:00.0: PME# disabled [ 0.087986] pci 0000:06:03.0: reg 10 32bit mmio: [0xe0000000-0xe0000fff] [ 0.087986] pci 0000:06:03.0: supports D1 D2 [ 0.087986] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot [ 0.087986] pci 0000:06:03.0: PME# disabled [ 0.087986] pci 0000:00:1e.0: transparent bridge [ 0.087986] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] [ 0.087986] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe00fffff] [ 0.087986] pci_bus 0000:00: on NUMA node 0 [ 0.087986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.088363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.088681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.088791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.088901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.089001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.089112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.106114] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.106480] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 0.106827] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) [ 0.106983] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.106983] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) [ 0.106983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) [ 0.106983] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 0.106983] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.107036] sync cpu 0 get result 1 max_id 3 [ 0.107036] sync cpu 1 get result 1 max_id 3 [ 0.107036] sync cpu 2 get result 1 max_id 3 [ 0.107036] sync cpu 3 get result 1 max_id 3 [ 0.107036] alloc irq_desc for 1258 on node 0 [ 0.107036] alloc kstat_irqs on node 0 [ 0.107043] xen_balloon: Initialising balloon driver with page order 0. [ 0.108035] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.108095] vgaarb: loaded [ 0.108248] SCSI subsystem initialized [ 0.109036] libata version 3.00 loaded. [ 0.109036] usbcore: registered new interface driver usbfs [ 0.109079] usbcore: registered new interface driver hub [ 0.110034] usbcore: registered new device driver usb [ 0.110061] PCI: Using ACPI for IRQ routing [ 0.111191] NetLabel: Initializing [ 0.111191] NetLabel: domain hash size = 128 [ 0.111191] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.111191] NetLabel: unlabeled traffic allowed by default [ 0.111334] Switching to clocksource xen [ 0.115342] pnp: PnP ACPI init [ 0.115403] ACPI: bus type pnp registered [ 0.118022] xen: registering gsi 8 triggering 1 polarity 0 [ 0.118025] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.118083] xen: --> irq=8 [ 0.118257] xen: registering gsi 13 triggering 1 polarity 0 [ 0.118261] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.118318] xen: --> irq=13 [ 0.119537] xen: registering gsi 6 triggering 1 polarity 0 [ 0.119540] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.119587] xen: --> irq=6 [ 0.120340] xen: registering gsi 4 triggering 1 polarity 0 [ 0.120344] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.120390] xen: --> irq=4 [ 0.121092] pnp: PnP ACPI: found 12 devices [ 0.121147] ACPI: ACPI bus type pnp unregistered [ 0.121201] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved [ 0.121263] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved [ 0.121315] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 0.121367] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.121417] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.121473] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.121525] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.121576] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.121626] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 0.121677] system 00:01: iomem range 0xc0000-0xdffff could not be reserved [ 0.121727] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 0.121778] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.121850] system 00:06: ioport range 0x500-0x53f has been reserved [ 0.121899] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.121948] system 00:06: ioport range 0x680-0x6ff has been reserved [ 0.128690] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.128763] pci 0000:06:00.0: BAR 6: address space collision on of device [0xfffe0000-0xffffffff] [ 0.128925] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.128974] pci 0000:00:1c.0: IO window: 0x4000-0x4fff [ 0.129002] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff [ 0.129002] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff [ 0.129002] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.129002] pci 0000:00:1c.1: IO window: 0x5000-0x5fff [ 0.129002] pci 0000:00:1c.1: MEM window: 0x80400000-0x805fffff [ 0.129002] pci 0000:00:1c.1: PREFETCH window: 0x00000080600000-0x000000807fffff [ 0.129002] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.129002] pci 0000:00:1c.2: IO window: 0x2000-0x2fff [ 0.129002] pci 0000:00:1c.2: MEM window: 0xe0100000-0xe01fffff [ 0.129002] pci 0000:00:1c.2: PREFETCH window: 0x00000080800000-0x000000809fffff [ 0.129002] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 [ 0.129002] pci 0000:00:1c.3: IO window: 0x6000-0x6fff [ 0.129002] pci 0000:00:1c.3: MEM window: 0x80a00000-0x80bfffff [ 0.129002] pci 0000:00:1c.3: PREFETCH window: 0x00000080c00000-0x00000080dfffff [ 0.129002] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 [ 0.129002] pci 0000:00:1c.4: IO window: 0x7000-0x7fff [ 0.129002] pci 0000:00:1c.4: MEM window: 0x80e00000-0x80ffffff [ 0.129002] pci 0000:00:1c.4: PREFETCH window: 0x00000081000000-0x000000811fffff [ 0.129002] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.129002] pci 0000:00:1e.0: IO window: 0x1000-0x1fff [ 0.129002] pci 0000:00:1e.0: MEM window: 0xe0000000-0xe00fffff [ 0.129002] pci 0000:00:1e.0: PREFETCH window: 0x81200000-0x812fffff [ 0.129002] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.129002] xen: registering gsi 17 triggering 0 polarity 1 [ 0.129002] alloc irq_desc for 17 on node 0 [ 0.129002] alloc kstat_irqs on node 0 [ 0.130344] xen: --> irq=17 [ 0.130351] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.130418] pci 0000:00:1c.0: setting latency timer to 64 [ 0.130433] pci 0000:00:1c.1: enabling device (0000 -> 0003) [ 0.130482] xen: registering gsi 20 triggering 0 polarity 1 [ 0.130487] alloc irq_desc for 20 on node 0 [ 0.130490] alloc kstat_irqs on node 0 [ 0.130493] xen: --> irq=20 [ 0.130498] pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.130553] pci 0000:00:1c.1: setting latency timer to 64 [ 0.130568] xen: registering gsi 18 triggering 0 polarity 1 [ 0.130573] alloc irq_desc for 18 on node 0 [ 0.130575] alloc kstat_irqs on node 0 [ 0.130579] xen: --> irq=18 [ 0.130583] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.130636] pci 0000:00:1c.2: setting latency timer to 64 [ 0.130650] pci 0000:00:1c.3: enabling device (0000 -> 0003) [ 0.130699] xen: registering gsi 19 triggering 0 polarity 1 [ 0.130704] alloc irq_desc for 19 on node 0 [ 0.130707] alloc kstat_irqs on node 0 [ 0.130710] xen: --> irq=19 [ 0.130715] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.130770] pci 0000:00:1c.3: setting latency timer to 64 [ 0.130784] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 0.130833] xen: registering gsi 17 triggering 0 polarity 1 [ 0.130836] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.130882] xen: --> irq=17 [ 0.130884] Already setup the GSI :17 [ 0.130927] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.130982] pci 0000:00:1c.4: setting latency timer to 64 [ 0.130994] pci 0000:00:1e.0: setting latency timer to 64 [ 0.131001] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.131004] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.131007] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.131010] pci_bus 0000:01: resource 1 mem: [0x80000000-0x801fffff] [ 0.131013] pci_bus 0000:01: resource 2 pref mem [0x80200000-0x803fffff] [ 0.131016] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff] [ 0.131018] pci_bus 0000:02: resource 1 mem: [0x80400000-0x805fffff] [ 0.131021] pci_bus 0000:02: resource 2 pref mem [0x80600000-0x807fffff] [ 0.131024] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 0.131026] pci_bus 0000:03: resource 1 mem: [0xe0100000-0xe01fffff] [ 0.131029] pci_bus 0000:03: resource 2 pref mem [0x80800000-0x809fffff] [ 0.131032] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff] [ 0.131035] pci_bus 0000:04: resource 1 mem: [0x80a00000-0x80bfffff] [ 0.131038] pci_bus 0000:04: resource 2 pref mem [0x80c00000-0x80dfffff] [ 0.131040] pci_bus 0000:05: resource 0 io: [0x7000-0x7fff] [ 0.131043] pci_bus 0000:05: resource 1 mem: [0x80e00000-0x80ffffff] [ 0.131046] pci_bus 0000:05: resource 2 pref mem [0x81000000-0x811fffff] [ 0.131049] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff] [ 0.131051] pci_bus 0000:06: resource 1 mem: [0xe0000000-0xe00fffff] [ 0.131054] pci_bus 0000:06: resource 2 pref mem [0x81200000-0x812fffff] [ 0.131057] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.131059] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.131089] NET: Registered protocol family 2 [ 0.131204] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.131625] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.133138] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.133678] TCP: Hash tables configured (established 262144 bind 65536) [ 0.133727] TCP reno registered [ 0.133895] NET: Registered protocol family 1 [ 0.134333] RPC: Registered udp transport module. [ 0.134387] RPC: Registered tcp transport module. [ 0.134437] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.134504] pci 0000:00:02.0: Boot video device [ 0.134519] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.134521] pci 0000:00:1a.0: Performing full reset [ 0.134544] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.134547] pci 0000:00:1a.1: Performing full reset [ 0.134568] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.134570] pci 0000:00:1a.2: Performing full reset [ 0.134766] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.134768] pci 0000:00:1d.0: Performing full reset [ 0.134790] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.134792] pci 0000:00:1d.1: Performing full reset [ 0.134815] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.134817] pci 0000:00:1d.2: Performing full reset [ 0.135041] Trying to unpack rootfs image as initramfs... [ 0.140488] Freeing initrd memory: 4401k freed [ 0.141010] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.141010] DMA: Placing 64MB software IO TLB between ffff880004333000 - ffff880008333000 [ 0.141010] DMA: software IO TLB at phys 0x4333000 - 0x8333000 [ 0.142282] kvm: no hardware support [ 0.142349] has_svm: not amd [ 0.142395] kvm: no hardware support [ 0.147388] Microcode Update Driver: v2.00 , Peter Oruba [ 0.147467] Scanning for low memory corruption every 60 seconds [ 0.148250] audit: initializing netlink socket (disabled) [ 0.148316] type=2000 audit(1289234610.432:1): initialized [ 0.157875] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.165353] VFS: Disk quotas dquot_6.5.2 [ 0.165555] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.168381] msgmni has been set to 3865 [ 0.168662] SELinux: Registering netfilter hooks [ 0.169779] alg: No test for stdrng (krng) [ 0.170112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.170192] io scheduler noop registered [ 0.170244] io scheduler anticipatory registered [ 0.170304] io scheduler deadline registered [ 0.170362] io scheduler cfq registered (default) [ 0.170713] alloc irq_desc for 1257 on node 0 [ 0.170717] alloc kstat_irqs on node 0 [ 0.170764] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.171310] alloc irq_desc for 1256 on node 0 [ 0.171313] alloc kstat_irqs on node 0 [ 0.171343] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.171843] alloc irq_desc for 1255 on node 0 [ 0.171846] alloc kstat_irqs on node 0 [ 0.171876] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.172394] alloc irq_desc for 1254 on node 0 [ 0.172397] alloc kstat_irqs on node 0 [ 0.172434] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.172939] alloc irq_desc for 1253 on node 0 [ 0.172941] alloc kstat_irqs on node 0 [ 0.172972] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.173589] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.174627] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.174716] ACPI: Sleep Button [SLPB] [ 0.174958] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.175039] ACPI: Power Button [PWRF] [ 0.178801] Event-channel device installed. [ 0.182157] blktap_device_init: blktap device major 253 [ 0.182212] blktap_ring_init: blktap ring major: 251 [ 0.184522] registering netback [ 0.195155] alloc irq_desc for 1252 on node 0 [ 0.195160] alloc kstat_irqs on node 0 [ 0.196526] hpet_acpi_add: no address or irqs in _CRS [ 0.196790] Non-volatile memory driver v1.3 [ 0.196993] Linux agpgart interface v0.103 [ 0.197044] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.441146] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.685142] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 0.686063] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.690942] brd: module loaded [ 0.693277] loop: module loaded [ 0.694313] ahci 0000:00:1f.2: version 3.0 [ 0.694335] xen: registering gsi 21 triggering 0 polarity 1 [ 0.694344] alloc irq_desc for 21 on node 0 [ 0.694347] alloc kstat_irqs on node 0 [ 0.694351] xen: --> irq=21 [ 0.694359] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.694465] alloc irq_desc for 1251 on node 0 [ 0.694467] alloc kstat_irqs on node 0 [ 0.694495] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 0.694607] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 0.694676] ahci 0000:00:1f.2: flags: 64bit ncq led clo pmp pio slum part ccc ems [ 0.694745] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.704140] scsi0 : ahci [ 0.704568] scsi1 : ahci [ 0.704932] scsi2 : ahci [ 0.705298] scsi3 : ahci [ 0.705672] scsi4 : ahci [ 0.706036] scsi5 : ahci [ 0.706613] ata1: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425100 irq 1251 [ 0.706680] ata2: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425180 irq 1251 [ 0.706746] ata3: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425200 irq 1251 [ 0.706812] ata4: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425280 irq 1251 [ 0.706878] ata5: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425300 irq 1251 [ 0.706944] ata6: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425380 irq 1251 [ 0.707939] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 0.708000] Copyright (c) 1999-2006 Intel Corporation. [ 0.708174] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.708238] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.708331] xen: registering gsi 20 triggering 0 polarity 1 [ 0.708335] xen_allocate_pirq: returning irq 20 for gsi 20 [ 0.708380] xen: --> irq=20 [ 0.708384] Already setup the GSI :20 [ 0.708427] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.708484] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.708650] alloc irq_desc for 1250 on node 0 [ 0.708652] alloc kstat_irqs on node 0 [ 0.919343] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:16:e2:06 [ 0.919412] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 0.919484] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff [ 0.919647] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 0.919707] Copyright (c) 2007-2009 Intel Corporation. [ 0.919870] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 0.919933] Copyright (c) 2009 Intel Corporation. [ 0.920378] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.920431] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.920775] sky2 driver version 1.25 [ 0.921161] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.921245] xen: registering gsi 21 triggering 0 polarity 1 [ 0.921248] xen_allocate_pirq: returning irq 21 for gsi 21 [ 0.921299] xen: --> irq=21 [ 0.921304] Already setup the GSI :21 [ 0.921352] r8169 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.921431] r8169 0000:06:00.0: no PCI Express capability [ 0.921872] eth1: RTL8169sb/8110sb at 0xffffc9000007e000, 00:08:54:aa:c0:ad, XID 10000000 IRQ 21 [ 0.922592] console [netcon0] enabled [ 0.922645] netconsole: network logging started [ 0.923073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.923134] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 0.923184] xen: registering gsi 17 triggering 0 polarity 1 [ 0.923189] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.923249] xen: --> irq=17 [ 0.923252] Already setup the GSI :17 [ 0.923301] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 0.923370] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.923375] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.923439] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices' [ 0.923444] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.923561] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.923646] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.923652] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 0.923723] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.923780] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.927677] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.927680] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 0.927704] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0425c00 [ 0.927753] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.931637] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.937038] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.937146] usb usb1: default language 0x0409 [ 0.937162] usb usb1: udev 1, busnum 1, minor = 0 [ 0.937165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.937215] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.937285] usb usb1: Product: EHCI Host Controller [ 0.937335] usb usb1: Manufacturer: Linux 2.6.32.15-xen4 ehci_hcd [ 0.937382] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.937559] usb usb1: usb_probe_device [ 0.937564] usb usb1: configuration #1 chosen from 1 choice [ 0.937630] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.937754] hub 1-0:1.0: usb_probe_interface [ 0.937759] hub 1-0:1.0: usb_probe_interface - got id [ 0.937763] hub 1-0:1.0: USB hub found [ 0.937841] hub 1-0:1.0: 6 ports detected [ 0.937885] hub 1-0:1.0: standalone hub [ 0.937887] hub 1-0:1.0: no power switching (usb 1.0) [ 0.937889] hub 1-0:1.0: individual port over-current protection [ 0.937892] hub 1-0:1.0: power on to power good time: 20ms [ 0.937898] hub 1-0:1.0: local power source is good [ 0.937901] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.937935] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.937973] xen: registering gsi 23 triggering 0 polarity 1 [ 0.937981] alloc irq_desc for 23 on node 0 [ 0.937984] alloc kstat_irqs on node 0 [ 0.937988] xen: --> irq=23 [ 0.937995] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.938064] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.938069] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.938124] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 0.938254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.938339] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.938345] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 0.938412] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.938468] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.942356] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.942358] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.942377] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0425800 [ 0.942426] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.946315] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.952048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.952176] usb usb2: default language 0x0409 [ 0.952187] usb usb2: udev 1, busnum 2, minor = 128 [ 0.952190] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.952240] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952305] usb usb2: Product: EHCI Host Controller [ 0.952349] usb usb2: Manufacturer: Linux 2.6.32.15-xen4 ehci_hcd [ 0.952396] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.952609] usb usb2: usb_probe_device [ 0.952613] usb usb2: configuration #1 chosen from 1 choice [ 0.952676] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.952810] hub 2-0:1.0: usb_probe_interface [ 0.952813] hub 2-0:1.0: usb_probe_interface - got id [ 0.952816] hub 2-0:1.0: USB hub found [ 0.952906] hub 2-0:1.0: 6 ports detected [ 0.952949] hub 2-0:1.0: standalone hub [ 0.952952] hub 2-0:1.0: no power switching (usb 1.0) [ 0.952954] hub 2-0:1.0: individual port over-current protection [ 0.952957] hub 2-0:1.0: power on to power good time: 20ms [ 0.952963] hub 2-0:1.0: local power source is good [ 0.952966] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.953001] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.953159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.953219] ohci_hcd: block sizes: ed 80 td 96 [ 0.953353] uhci_hcd: USB Universal Host Controller Interface driver [ 0.953579] xen: registering gsi 18 triggering 0 polarity 1 [ 0.953583] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.953639] xen: --> irq=18 [ 0.953643] Already setup the GSI :18 [ 0.953685] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.953742] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.953748] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.953798] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 0.953937] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.954019] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.954076] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.954079] uhci_hcd 0000:00:1a.0: Performing full reset [ 0.954098] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 0.954120] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030e0 [ 0.954247] usb usb3: default language 0x0409 [ 0.954258] usb usb3: udev 1, busnum 3, minor = 256 [ 0.954260] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.954310] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.954375] usb usb3: Product: UHCI Host Controller [ 0.954420] usb usb3: Manufacturer: Linux 2.6.32.15-xen4 uhci_hcd [ 0.954466] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.954670] usb usb3: usb_probe_device [ 0.954674] usb usb3: configuration #1 chosen from 1 choice [ 0.954736] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.954860] hub 3-0:1.0: usb_probe_interface [ 0.954863] hub 3-0:1.0: usb_probe_interface - got id [ 0.954865] hub 3-0:1.0: USB hub found [ 0.954944] hub 3-0:1.0: 2 ports detected [ 0.954987] hub 3-0:1.0: standalone hub [ 0.954990] hub 3-0:1.0: no power switching (usb 1.0) [ 0.954992] hub 3-0:1.0: individual port over-current protection [ 0.954995] hub 3-0:1.0: power on to power good time: 2ms [ 0.955001] hub 3-0:1.0: local power source is good [ 0.955004] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.955033] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.955074] xen: registering gsi 21 triggering 0 polarity 1 [ 0.955077] xen_allocate_pirq: returning irq 21 for gsi 21 [ 0.955123] xen: --> irq=21 [ 0.955126] Already setup the GSI :21 [ 0.955169] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.955236] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.955241] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.955291] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004' [ 0.955417] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.955489] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.955538] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.955541] uhci_hcd 0000:00:1a.1: Performing full reset [ 0.955559] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 0.955577] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0 [ 0.955690] usb usb4: default language 0x0409 [ 0.955701] usb usb4: udev 1, busnum 4, minor = 384 [ 0.955704] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.955753] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.955818] usb usb4: Product: UHCI Host Controller [ 0.955862] usb usb4: Manufacturer: Linux 2.6.32.15-xen4 uhci_hcd [ 0.955909] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.956109] usb usb4: usb_probe_device [ 0.956113] usb usb4: configuration #1 chosen from 1 choice [ 0.956175] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.956318] hub 4-0:1.0: usb_probe_interface [ 0.956321] hub 4-0:1.0: usb_probe_interface - got id [ 0.956323] hub 4-0:1.0: USB hub found [ 0.956395] hub 4-0:1.0: 2 ports detected [ 0.956440] hub 4-0:1.0: standalone hub [ 0.956442] hub 4-0:1.0: no power switching (usb 1.0) [ 0.956445] hub 4-0:1.0: individual port over-current protection [ 0.956447] hub 4-0:1.0: power on to power good time: 2ms [ 0.956453] hub 4-0:1.0: local power source is good [ 0.956456] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.956475] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.956516] xen: registering gsi 17 triggering 0 polarity 1 [ 0.956519] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.956565] xen: --> irq=17 [ 0.956568] Already setup the GSI :17 [ 0.956610] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 0.956666] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.956671] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.956720] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005' [ 0.956872] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.956955] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.957011] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.957014] uhci_hcd 0000:00:1a.2: Performing full reset [ 0.957033] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 0.957039] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000030a0 [ 0.957149] usb usb5: default language 0x0409 [ 0.957160] usb usb5: udev 1, busnum 5, minor = 512 [ 0.957163] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.957223] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.957288] usb usb5: Product: UHCI Host Controller [ 0.957333] usb usb5: Manufacturer: Linux 2.6.32.15-xen4 uhci_hcd [ 0.957379] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.957573] usb usb5: usb_probe_device [ 0.957576] usb usb5: configuration #1 chosen from 1 choice [ 0.957639] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.957765] hub 5-0:1.0: usb_probe_interface [ 0.957768] hub 5-0:1.0: usb_probe_interface - got id [ 0.957770] hub 5-0:1.0: USB hub found [ 0.957842] hub 5-0:1.0: 2 ports detected [ 0.957887] hub 5-0:1.0: standalone hub [ 0.957889] hub 5-0:1.0: no power switching (usb 1.0) [ 0.957892] hub 5-0:1.0: individual port over-current protection [ 0.957894] hub 5-0:1.0: power on to power good time: 2ms [ 0.957900] hub 5-0:1.0: local power source is good [ 0.957903] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.957922] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.957963] xen: registering gsi 23 triggering 0 polarity 1 [ 0.957966] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.958012] xen: --> irq=23 [ 0.958015] Already setup the GSI :23 [ 0.958061] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.958116] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.958120] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.958169] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006' [ 0.958329] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.958412] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.958461] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.958464] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.958482] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.958489] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 [ 0.958600] usb usb6: default language 0x0409 [ 0.958610] usb usb6: udev 1, busnum 6, minor = 640 [ 0.958613] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.958673] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.958738] usb usb6: Product: UHCI Host Controller [ 0.958782] usb usb6: Manufacturer: Linux 2.6.32.15-xen4 uhci_hcd [ 0.958829] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.959018] usb usb6: usb_probe_device [ 0.959022] usb usb6: configuration #1 chosen from 1 choice [ 0.959074] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 0.959202] hub 6-0:1.0: usb_probe_interface [ 0.959204] hub 6-0:1.0: usb_probe_interface - got id [ 0.959207] hub 6-0:1.0: USB hub found [ 0.959280] hub 6-0:1.0: 2 ports detected [ 0.959326] hub 6-0:1.0: standalone hub [ 0.959328] hub 6-0:1.0: no power switching (usb 1.0) [ 0.959331] hub 6-0:1.0: individual port over-current protection [ 0.959333] hub 6-0:1.0: power on to power good time: 2ms [ 0.959339] hub 6-0:1.0: local power source is good [ 0.959342] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 0.959361] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.959400] xen: registering gsi 19 triggering 0 polarity 1 [ 0.959403] xen_allocate_pirq: returning irq 19 for gsi 19 [ 0.959449] xen: --> irq=19 [ 0.959452] Already setup the GSI :19 [ 0.959495] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.959551] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.959556] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.959608] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007' [ 0.959737] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.959809] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.959858] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.959861] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.959879] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.959897] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 [ 0.960021] usb usb7: default language 0x0409 [ 0.960032] usb usb7: udev 1, busnum 7, minor = 768 [ 0.960034] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.960084] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.960148] usb usb7: Product: UHCI Host Controller [ 0.960203] usb usb7: Manufacturer: Linux 2.6.32.15-xen4 uhci_hcd [ 0.960250] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.960441] usb usb7: usb_probe_device [ 0.960444] usb usb7: configuration #1 chosen from 1 choice [ 0.962287] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 0.962419] hub 7-0:1.0: usb_probe_interface [ 0.962422] hub 7-0:1.0: usb_probe_interface - got id [ 0.962424] hub 7-0:1.0: USB hub found [ 0.962503] hub 7-0:1.0: 2 ports detected [ 0.962547] hub 7-0:1.0: standalone hub [ 0.962549] hub 7-0:1.0: no power switching (usb 1.0) [ 0.962551] hub 7-0:1.0: individual port over-current protection [ 0.962554] hub 7-0:1.0: power on to power good time: 2ms [ 0.962560] hub 7-0:1.0: local power source is good [ 0.962563] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 0.962581] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.962621] xen: registering gsi 18 triggering 0 polarity 1 [ 0.962624] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.962671] xen: --> irq=18 [ 0.962674] Already setup the GSI :18 [ 0.962717] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.962773] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.962778] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.962828] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008' [ 0.962970] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.963053] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.963108] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.963112] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.963130] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.963137] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 0.963258] usb usb8: default language 0x0409 [ 0.963269] usb usb8: udev 1, busnum 8, minor = 896 [ 0.963272] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.963324] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.963389] usb usb8: Product: UHCI Host Controller [ 0.963434] usb usb8: Manufacturer: Linux 2.6.32.15-xen4 uhci_hcd [ 0.963481] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.963676] usb usb8: usb_probe_device [ 0.963679] usb usb8: configuration #1 chosen from 1 choice [ 0.963742] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 0.963869] hub 8-0:1.0: usb_probe_interface [ 0.963871] hub 8-0:1.0: usb_probe_interface - got id [ 0.963874] hub 8-0:1.0: USB hub found [ 0.963946] hub 8-0:1.0: 2 ports detected [ 0.963991] hub 8-0:1.0: standalone hub [ 0.963993] hub 8-0:1.0: no power switching (usb 1.0) [ 0.963995] hub 8-0:1.0: individual port over-current protection [ 0.963998] hub 8-0:1.0: power on to power good time: 2ms [ 0.964004] hub 8-0:1.0: local power source is good [ 0.964007] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 0.964034] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.964303] usbcore: registered new interface driver usblp [ 0.964361] Initializing USB Mass Storage driver... [ 0.964528] usbcore: registered new interface driver usb-storage [ 0.964576] USB Mass Storage support registered. [ 0.964754] usbcore: registered new interface driver libusual [ 0.965273] PNP: No PS/2 controller found. Probing ports directly. [ 0.968514] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.968567] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.968882] mice: PS/2 mouse device common for all mice [ 0.969509] rtc_cmos 00:03: RTC can wake from S4 [ 0.969701] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.969790] rtc0: alarms up to one month, 114 bytes nvram [ 0.969965] xen: registering gsi 18 triggering 0 polarity 1 [ 0.969968] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.970024] xen: --> irq=18 [ 0.970028] Already setup the GSI :18 [ 0.970071] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.970395] Linux video capture interface: v2.00 [ 0.970563] md: raid0 personality registered for level 0 [ 0.970620] md: raid1 personality registered for level 1 [ 0.970666] md: raid10 personality registered for level 10 [ 0.971336] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.971943] cpuidle: using governor ladder [ 0.971997] cpuidle: using governor menu [ 0.972333] Netfilter messages via NETLINK v0.30. [ 0.972405] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.972892] ctnetlink v0.93: registering with nfnetlink. [ 0.973562] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.973637] TCP cubic registered [ 0.973679] Initializing XFRM netlink socket [ 0.974299] NET: Registered protocol family 10 [ 0.975690] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.975791] IPv6 over IPv4 tunneling driver [ 0.976598] NET: Registered protocol family 17 [ 0.977075] PM: Resume from disk failed. [ 0.977097] registered taskstats version 1 [ 0.977948] Magic number: 2:14:742 [ 1.013043] ata3: SATA link down (SStatus 0 SControl 300) [ 1.013142] ata4: SATA link down (SStatus 0 SControl 300) [ 1.037069] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT [ 1.037077] hub 1-0:1.0: port 5: status 0501 change 0001 [ 1.052071] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 1.052078] hub 2-0:1.0: port 5: status 0501 change 0001 [ 1.054073] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.056066] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.057040] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00 [ 1.059078] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.062066] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.063041] uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00 [ 1.137037] hub 1-0:1.0: state 7 ports 6 chg 0020 evt 0000 [ 1.137047] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 1.137058] ehci_hcd 0000:00:1a.7: port 5 low speed --> companion [ 1.165041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.165118] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.166037] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.168691] ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 1.168749] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.169037] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.170882] ata5.00: configured for UDMA/133 [ 1.171606] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 [ 1.171654] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.178227] ata2.00: configured for UDMA/133 [ 1.188059] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC [ 1.188089] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020 [ 1.188101] hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000 [ 1.188110] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 1.189717] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 1.189776] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.191923] ata6.00: configured for UDMA/133 [ 1.205379] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 1.205437] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.239205] ehci_hcd 0000:00:1d.7: port 5 full speed --> companion [ 1.239209] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT [ 1.239214] hub 2-0:1.0: port 5 not reset yet, waiting 50ms [ 1.263704] ata1.00: configured for UDMA/133 [ 1.263912] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 1.264556] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.264585] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.264786] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5 [ 1.264999] sd 0:0:0:0: [sda] Write Protect is off [ 1.265050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.265150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.265338] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.265493] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.265518] sd 1:0:0:0: [sdb] Write Protect is off [ 1.265521] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.265564] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.265821] sda: [ 1.265881] sdb: [ 1.265966] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.266546] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.266699] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.266716] sd 4:0:0:0: [sdc] Write Protect is off [ 1.266719] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.266761] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.267037] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.267134] sdc: [ 1.267539] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.267716] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.267768] sd 5:0:0:0: [sdd] Write Protect is off [ 1.267824] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.267868] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.268135] sdd: sdb1 [ 1.271825] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.272370] [ 1.272851] sd 5:0:0:0: [sdd] Attached SCSI disk [ 1.273932] sdc1 [ 1.274009] sdc: p1 size 1953529856 exceeds device capacity, limited to end of disk [ 1.274673] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1.290040] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC [ 1.290066] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 1.290079] uhci_hcd 0000:00:1a.2: port 1 portsc 01a3,00 [ 1.290091] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 1.303381] sda1 sda2 sda3 sda4 < sda5 > [ 1.315468] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.315584] Freeing unused kernel memory: 520k freed [ 1.315782] Write protecting the kernel read-only data: 7944k [ 1.398123] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 1.502039] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 1.648176] usb 5-1: skipped 1 descriptor after interface [ 1.648181] usb 5-1: skipped 1 descriptor after interface [ 1.653180] usb 5-1: default language 0x0409 [ 1.668183] usb 5-1: udev 2, busnum 5, minor = 513 [ 1.668188] usb 5-1: New USB device found, idVendor=046d, idProduct=c517 [ 1.668261] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.668316] usb 5-1: Product: USB Receiver [ 1.668365] usb 5-1: Manufacturer: Logitech [ 1.668504] usb 5-1: usb_probe_device [ 1.668509] usb 5-1: configuration #1 chosen from 1 choice [ 1.671192] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 1.671268] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 1.671327] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 1.671363] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 1.671375] uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00 [ 1.671385] hub 8-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 1.775108] hub 8-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 1.877054] usb 8-1: new full speed USB device using uhci_hcd and address 2 [ 1.997047] usb 8-1: ep0 maxpacket = 8 [ 2.027281] usb 8-1: skipped 1 descriptor after interface [ 2.027288] usb 8-1: skipped 1 descriptor after interface [ 2.032272] usb 8-1: default language 0x0409 [ 2.040445] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 2.047277] usb 8-1: udev 2, busnum 8, minor = 897 [ 2.047282] usb 8-1: New USB device found, idVendor=046d, idProduct=c525 [ 2.047343] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.047403] usb 8-1: Product: USB Receiver [ 2.047455] usb 8-1: Manufacturer: Logitech [ 2.047608] usb 8-1: usb_probe_device [ 2.047612] usb 8-1: configuration #1 chosen from 1 choice [ 2.052275] usb 8-1: adding 8-1:1.0 (config #1, interface 0) [ 2.052356] usb 8-1: adding 8-1:1.1 (config #1, interface 1) [ 2.052425] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 2.052466] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.203041] usb usb3: suspend_rh (auto-stop) [ 2.203077] usb usb4: suspend_rh (auto-stop) [ 2.203110] usb usb6: suspend_rh (auto-stop) [ 2.203142] usb usb7: suspend_rh (auto-stop) [ 3.632960] udev[1533]: starting version 163 [ 3.700156] hub 3-0:1.0: hub_suspend [ 3.700166] usb usb3: bus auto-suspend [ 3.700169] usb usb3: suspend_rh [ 3.700194] hub 4-0:1.0: hub_suspend [ 3.700199] usb usb4: bus auto-suspend [ 3.700201] usb usb4: suspend_rh [ 3.700220] hub 6-0:1.0: hub_suspend [ 3.700224] usb usb6: bus auto-suspend [ 3.700226] usb usb6: suspend_rh [ 3.700245] hub 7-0:1.0: hub_suspend [ 3.700249] usb usb7: bus auto-suspend [ 3.700252] usb usb7: suspend_rh [ 3.703406] hub 1-0:1.0: hub_suspend [ 3.703417] usb usb1: bus auto-suspend [ 3.703422] ehci_hcd 0000:00:1a.7: suspend root hub [ 3.896305] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 3.898146] agpgart-intel 0000:00:00.0: detected 7164K stolen memory [ 3.962540] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 4.021748] xen: registering gsi 19 triggering 0 polarity 1 [ 4.021753] xen_allocate_pirq: returning irq 19 for gsi 19 [ 4.021755] xen: --> irq=19 [ 4.021761] Already setup the GSI :19 [ 4.021764] firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.078095] firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.0 [ 4.166174] usbcore: registered new interface driver hiddev [ 4.166191] usbhid 5-1:1.0: usb_probe_interface [ 4.166195] usbhid 5-1:1.0: usb_probe_interface - got id [ 4.166299] usbhid 5-1:1.1: usb_probe_interface [ 4.166303] usbhid 5-1:1.1: usb_probe_interface - got id [ 4.166369] usbhid 8-1:1.0: usb_probe_interface [ 4.166373] usbhid 8-1:1.0: usb_probe_interface - got id [ 4.169560] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2 [ 4.169652] generic-usb 0003:046D:C525.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0 [ 4.169676] usbhid 8-1:1.1: usb_probe_interface [ 4.169680] usbhid 8-1:1.1: usb_probe_interface - got id [ 4.174369] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input3 [ 4.174380] uhci_hcd 0000:00:1d.2: reserve dev 2 ep82-INT, period 1, phase 0, 26 us [ 4.174421] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96 [ 4.174485] generic-usb 0003:046D:C525.0004: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1 [ 4.174514] usbcore: registered new interface driver usbhid [ 4.174518] usbhid: v2.6:USB HID core driver [ 4.198074] [drm] Initialized drm 1.1.0 20060810 [ 4.202125] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 1, phase 0, 17 us [ 4.223259] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 1, phase 0, 17 us [ 4.373500] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input4 [ 4.373512] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 4.373577] logitech 0003:046D:C517.0001: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0 [ 4.405171] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 4.405860] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input5 [ 4.405872] uhci_hcd 0000:00:1a.2: reserve dev 2 ep82-INT, period 8, phase 4, 118 us [ 4.405951] /root/xen/xen-4.0.1/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96 [ 4.406022] logitech 0003:046D:C517.0002: input,hiddev97,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1 [ 4.451552] xen: registering gsi 16 triggering 0 polarity 1 [ 4.451562] alloc irq_desc for 16 on node 0 [ 4.451566] alloc kstat_irqs on node 0 [ 4.451571] xen: --> irq=16 [ 4.451579] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.451586] i915 0000:00:02.0: setting latency timer to 64 [ 4.518859] alloc irq_desc for 1249 on node 0 [ 4.518864] alloc kstat_irqs on node 0 [ 4.518897] [drm] set up 7M of stolen space [ 4.581412] firewire_core: created device fw0: GUID 0090270001f12f22, S400 [ 4.703416] hub 2-0:1.0: hub_suspend [ 4.703424] usb usb2: bus auto-suspend [ 4.703428] ehci_hcd 0000:00:1d.7: suspend root hub [ 4.855578] [drm] initialized overlay support [ 5.164480] BUG: unable to handle kernel paging request at ffffc900080ec000 [ 5.164589] IP: [] intel_i915_chipset_flush+0x15/0x19 [intel_agp] [ 5.164684] PGD 7f80c067 PUD 7f80d067 PMD 7f982067 PTE 0 [ 5.164808] Oops: 0002 [#1] SMP [ 5.164888] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/scsi_level [ 5.164959] CPU 1 [ 5.165016] Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_hda_intel(+) snd_pcm_oss snd_hda_codec snd_mixer_oss i915(+) snd_hwdep snd_pcm drm_kms_helper hid_logitech snd_timer drm usbhid i2c_algo_bit snd hid firewire_ohci video firewire_core crc_itu_t soundcore output snd_page_alloc intel_agp [ 5.165128] Pid: 1683, comm: modprobe Not tainted 2.6.32.15-xen4 #22 [ 5.165128] RIP: e030:[] [] intel_i915_chipset_flush+0x15/0x19 [intel_agp] [ 5.165128] RSP: e02b:ffff88007d60f9a8 EFLAGS: 00010286 [ 5.165128] RAX: ffffc900080ec000 RBX: ffff88007e897a80 RCX: 0000000000001000 [ 5.165128] RDX: 0000000000000001 RSI: 00000000000007e9 RDI: ffff88007f91cb00 [ 5.165128] RBP: ffff88007d60f9a8 R08: ffff88007d60ffd8 R09: ffff88007d60ffd8 [ 5.165128] R10: 0000000000000040 R11: ffff880000000000 R12: ffff88007e97a000 [ 5.165128] R13: 0000000000000001 R14: ffff88007e8976c0 R15: 0000000000000001 [ 5.165128] FS: 00007fd72230f700(0000) GS:ffff880002362000(0000) knlGS:0000000000000000 [ 5.165128] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5.165128] CR2: ffffc900080ec000 CR3: 000000007ce0f000 CR4: 0000000000002660 [ 5.165128] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.165128] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5.165128] Process modprobe (pid: 1683, threadinfo ffff88007d60e000, task ffff88007dc8f260) [ 5.165128] Stack: [ 5.165128] ffff88007d60f9b8 ffffffff812d0f92 ffff88007d60f9c8 ffffffffa006eb0e [ 5.165128] <0> ffff88007d60f9e8 ffffffffa00c5dfa ffff88007e897a80 0000000000000000 [ 5.165128] <0> ffff88007d60fa38 ffffffffa00c7315 ffff88007d60fa38 ffffffff00000001 [ 5.165128] Call Trace: [ 5.165128] [] agp_flush_chipset+0x16/0x18 [ 5.165128] [] drm_agp_chipset_flush+0x14/0x16 [drm] [ 5.165128] [] i915_gem_object_flush_cpu_write_domain+0x21/0x3b [i915] [ 5.165128] [] i915_gem_object_set_to_gtt_domain+0x59/0xa6 [i915] [ 5.165128] [] intelfb_create+0x10c/0x418 [i915] [ 5.165128] [] ? xen_force_evtchn_callback+0xd/0xf [ 5.165128] [] drm_fb_helper_single_fb_probe+0x1c1/0x42d [drm_kms_helper] [ 5.165128] [] ? intelfb_create+0x0/0x418 [i915] [ 5.165128] [] intelfb_probe+0x41/0x45 [i915] [ 5.165128] [] drm_helper_initial_config+0x52/0x58 [drm_kms_helper] [ 5.165128] [] i915_driver_load+0xd15/0xdca [i915] [ 5.165128] [] ? pcibios_align_resource+0x0/0x43 [ 5.165128] [] drm_get_dev+0x375/0x481 [drm] [ 5.165128] [] i915_pci_probe+0x10/0x12 [i915] [ 5.165128] [] local_pci_probe+0x12/0x16 [ 5.165128] [] pci_device_probe+0x62/0x93 [ 5.165128] [] ? sysfs_create_link+0xe/0x10 [ 5.165128] [] driver_probe_device+0x9a/0x120 [ 5.165128] [] __driver_attach+0x58/0x7c [ 5.165128] [] ? __driver_attach+0x0/0x7c [ 5.165128] [] bus_for_each_dev+0x51/0x7d [ 5.165128] [] driver_attach+0x19/0x1b [ 5.165128] [] bus_add_driver+0xab/0x1ff [ 5.165128] [] driver_register+0x98/0x105 [ 5.165128] [] __pci_register_driver+0x51/0xbd [ 5.165128] [] ? i915_init+0x0/0x96 [i915] [ 5.165128] [] drm_init+0x72/0xd8 [drm] [ 5.165128] [] ? i915_init+0x0/0x96 [i915] [ 5.165128] [] i915_init+0x94/0x96 [i915] [ 5.165128] [] do_one_initcall+0x59/0x151 [ 5.165128] [] sys_init_module+0xd0/0x227 [ 5.165128] [] system_call_fastpath+0x16/0x1b [ 5.165128] Code: 89 f0 48 89 e5 48 03 51 20 48 0b 02 c9 c3 55 31 c0 48 89 e5 c9 c3 48 8b 05 4e 5a 00 00 55 48 89 e5 48 85 c0 74 07 ba 01 00 00 00 <89> 10 c9 c3 48 8b 15 0d 5a 00 00 55 48 89 e5 48 8b 8a 40 02 00 [ 5.165128] RIP [] intel_i915_chipset_flush+0x15/0x19 [intel_agp] [ 5.165128] RSP [ 5.165128] CR2: ffffc900080ec000 [ 5.165128] ---[ end trace 67fbda0ed8acb073 ]--- [ 183.953812] Adding 8388596k swap on /dev/sda3. Priority:-1 extents:1 across:8388596k [ 186.758264] r8169: eth1: link up [ 197.025023] eth1: no IPv6 routers present