Re: [Xen-users] Poor performance on bandwidth, Xen 4.0.1 kernel

All is identical...
I have no idea now...
If someone can help me..

For resume, on my dom0 with Xen 4.01 and kernel pvops 2.6.32.24 I have an average of 140Mbits/s bandwidth whereas I have a gigabit network card

Olivier Hanesse <olivier.hanesse@xxxxxxxxx>

23/11/2010 13:18

A	Rémi BERNIER <R.BERNIER@xxxxxxxxxxx>
cc
Objet	Re: [Xen-users] Poor performance on bandwidth, Xen 4.0.1 kernel pvops 2.6.32.24

lsmod | grep bnx
bnx2                   57273 0

modinfo bnx2
filename:       /lib/modules/2.6.32-bpo.5-xen-amd64/kernel/drivers/net/bnx2.ko
firmware:       bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw
firmware:       bnx2/bnx2-rv2p-09-5.0.0.j3.fw
firmware:       bnx2/bnx2-mips-09-5.0.0.j3.fw
firmware:       bnx2/bnx2-rv2p-06-5.0.0.j3.fw
firmware:       bnx2/bnx2-mips-06-5.0.0.j3.fw
version:        2.0.2
license:        GPL
description:    Broadcom NetXtreme II BCM5706/5708/5709/5716 Driver
author:         Michael Chan <mchan@xxxxxxxxxxxx>
srcversion:     8F18532C0D4FFBC79D95E9D
alias:          pci:v000014E4d0000163Csv*sd*bc*sc*i*
alias:          pci:v000014E4d0000163Bsv*sd*bc*sc*i*
alias:          pci:v000014E4d0000163Asv*sd*bc*sc*i*
alias:          pci:v000014E4d00001639sv*sd*bc*sc*i*
alias:          pci:v000014E4d000016ACsv*sd*bc*sc*i*
alias:          pci:v000014E4d000016AAsv*sd*bc*sc*i*
alias:          pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i*
alias:          pci:v000014E4d0000164Csv*sd*bc*sc*i*
alias:          pci:v000014E4d0000164Asv*sd*bc*sc*i*
alias:          pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i*
alias:          pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i*
depends:
vermagic:       2.6.32-bpo.5-xen-amd64 SMP mod_unload modversions
parm:           disable_msi:Disable Message Signaled Interrupt (MSI) (int)

Voilà :)

2010/11/23 Rémi BERNIER <R.BERNIER@xxxxxxxxxxx>

Thanks !!

And your:

#lsmod | grep bnx

Regards,

Rémi

Olivier Hanesse <olivier.hanesse@xxxxxxxxx>

23/11/2010 12:42

A	Rémi BERNIER <R.BERNIER@xxxxxxxxxxx>
cc
Objet	Re: [Xen-users] Poor performance on bandwidth, Xen 4.0.1 kernel pvops 2.6.32.24

Hello,

I got the backports version :

dpkg -l | grep firmware-bnx2
ii firmware-bnx2 0.24~bpo50+1 Binary firmware for Broadcom NetXtremeII

Hope this helps.

Olivier

2010/11/23 Rémi BERNIER <R.BERNIER@xxxxxxxxxxx>

Hello Olivier Hanesse and thanks for your answer !!

It's good to know this ! So now I would like to know the diffrence between you and me... What's your network card and have you installed the package "firmware-bnx2" ?
Can you give me the result of:

#dpkg -l | grep firmware-bnx2
For me:
ii firmware-bnx2 0.14 lenny2 Binary firmware for Broadcom NetXtremeII

and #lsmod | grep bnx
For me, just:
bnx2 63308 0

Really thanks,

Rémi

Hello,

Between 2 lenny dom0 with pvops kernel "2.6.32-26~bpo50+1" from debian backports, bnx2 (version 2.0.2) module seems good.

I got "1.10 GBytes 941 Mbits/sec"

Regards

Olivier

2010/11/23 Rémi BERNIER <R.BERNIER@xxxxxxxxxxx>

Hello all,

I have tested on the new server XEN-B with the default lenny install, kernel 2.6.26-2-amd64, i have the driver bnx2 with version 1.7.5 and the result of iperf is perfect (average 900Mbits/sec on bandwidth)
So I think is the version of driver bnx2 (2.0.2) on the pvops kernel 2.6.32.24 who raises worries.
Someone have the same problem ? How I can bypass this ?
Really thanks in advance for your answer !!

For information, I'm on debian Lenny 5.0.6 with a Dell PowerEdge 2950

Rémi

Hello list,

I have two differents installation Xen Hypervisor on two identical physical server, on the same switch :
The problem is on my new server (Xen 4.0.1 with pvops kernel 2.6.32.24), I have bad performance on bandwidth
I have test with a files copy and "iperf".
Result iperf average:
Transfert Bandwidth
XEN-A -> Windows Physical: 1005 MBytes 843 Mbits/sec
XEN-B -> Windows Physical: 522 MBytes 438 Mbits/sec
Windows Physical -> XEN-A: 477 MBytes 399 Mbits/sec
Windows Physical -> XEN-B: 175 MBytes 146 Mbits/sec

It's the same network card but on the new installation, the module bnx2 have a new version...
Maybe i haven't activate or forget something...
If you have an idea, I listen you !! Thanks in advance !
This is the details of two installations:

XEN-A:
- XEN 3.2.1 kernel 2.6.26-2-xen-amd64
#xm info
release : 2.6.26-2-xen-amd64
version : #1 SMP Sun Jun 21 08:09:04 UTC 2009
machine : x86_64
nr_cpus : 4
nr_nodes : 1
cores_per_socket : 2
threads_per_core : 1
cpu_mhz : 1995
hw_caps : bfebfbff:20100800:00000000:00000140:0004e33d:00000000:00000001
total_memory : 24570
free_memory : 918
node_to_cpu : node0:0-3
xen_major : 3
xen_minor : 2
xen_extra : -1
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : unavailable
cc_compiler : gcc version 4.3.1 (Debian 4.3.1-2)
cc_compile_by : waldi
cc_compile_domain : debian.org
cc_compile_date : Sat Jun 28 09:32:18 UTC 2008
xend_config_format : 4

#lspci -v
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
Subsystem: Dell Device 01b2
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Kernel driver in use: bnx2
Kernel modules: bnx2

#ethtool -i peth0
driver: bnx2
version: 1.7.5
firmware-version: 2.9.1
bus-info: 0000:05:00.0

XEN-B:
- XEN 4.0.1 kernel pvops 2.6.32.24
#xm info
release : 2.6.32.24
version : #1 SMP Thu Oct 14 10:56:13 CEST 2010
machine : x86_64
nr_cpus : 4
nr_nodes : 1
cores_per_socket : 2
threads_per_core : 1
cpu_mhz : 1995
hw_caps : bfebfbff:20100800:00000000:00000940:0004e33d:00000000:00000001:00000000
virt_caps : hvm
total_memory : 24570
free_memory : 10
node_to_cpu : node0:0-3
node_to_memory : node0:10
node_to_dma32_mem : node0:9
max_node_id : 0
xen_major : 4
xen_minor : 0
xen_extra : .1
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : unavailable
xen_commandline : loglvl=all guest_loglvl=all sync_console console_to_ring com1=19200,8n1 console=com1
cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
cc_compile_by : root
cc_compile_domain : test.com
cc_compile_date : Thu Oct 14 03:37:34 EDT 2010
xend_config_format : 4

#ethtool -i peth0
driver: bnx2
version: 2.0.2
firmware-version: 2.9.1
bus-info: 0000:05:00.0

#lspci -v
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
Subsystem: Dell Device 01b2
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 1245
Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Kernel driver in use: bnx2

Kernel modules: bnx2_______________________________________________ Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

WARNING - OLD ARCHIVES

xen-users

Re: [Xen-users] Poor performance on bandwidth, Xen 4.0.1 kernel pvops 2.