| 
         
xen-users
Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2,	Dell R610
 
| 
Hello Bruce, 
 
 Thanks for your reply. In my kernel, I did not find CONFIG_FIRMWARE_IN_KERNEL.  There are only 4 options related to firmware in my kernel: CONFIG_PREVENT_FIRMWARE_BUILD=y 
CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_FIRMWARE_EDID=y 
 
 Any idea? 
 
 Best, -Luwei 
On Sat, Nov 13, 2010 at 4:26 AM, Bruce Edge  <bruce.edge@xxxxxxxxx> wrote: 
On Fri, Nov 12, 2010 at 12:10 PM, Luwei Cheng < chengluwei@xxxxxxxxx> wrote: 
> So many issues I did not expect to have... I think I need a 2.6.18 stable 
> kernel to run. 
> Actually I have only ONE step to succeed in 2.6.18.8. Any one who knows how 
> to patch bnx2 dirver? 
> Deep thanks! 
> --Luwei 
> 
> On Sat, Nov 13, 2010 at 2:05 AM, Luwei Cheng < chengluwei@xxxxxxxxx> wrote: 
>> 
>> Yes, I am already in progress to install 2.6.32 with long time to git 
>> clone... hope not too much trouble shooting:-) 
>> Anyway, if there's any patch to 2.6.18.8-bnx2 driver, I'd like it more. 
>> Regards, 
>> Luwei
  Not sure if this is related to your specific problem, but to use a 
BNX2 NIC I need to enable 
    CONFIG_FIRMWARE_IN_KERNEL=y 
in order to pull the BNX2 firmware into the kernel, otherwise it 
complains that it can't find the firmware at boot time. 
 
-Bruce 
>> 
>> On Sat, Nov 13, 2010 at 1:56 AM, Konrad Rzeszutek Wilk 
>> < konrad.wilk@xxxxxxxxxx> wrote: 
>>> 
>>> On Sat, Nov 13, 2010 at 01:19:03AM +0800, Luwei Cheng wrote: 
>>> > Hello Konrad, 
>>> > 
>>> > Thanks for your reply to enlighten me. 
>>> > 
>>> > This is almost the first time that I compile XenLinux from source. To 
>>> > play 
>>> > safe, I just downloaded the source code from  www.xen.org. 
>>> > Is 2.6.32-PVOPS already stable kernel? Is there any document to follow 
>>> > so 
>>> > that I won't miss some steps? Thanks! 
>>> 
>>> Look on Google for "Wiki PVOPS" and it will direct you the Wiki on how to 
>>> do it. 
>> 
> 
>
  > _______________________________________________ 
> xen-api mailing list 
> xen-api@xxxxxxxxxxxxxxxxxxx 
> http://lists.xensource.com/mailman/listinfo/xen-api 
> 
> 
  
_______________________________________________
xen-api mailing list
xen-api@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/mailman/listinfo/xen-api
 
 |   
 
| <Prev in Thread] | 
Current Thread | 
[Next in Thread>
 |  
- [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2, Dell R610, Luwei Cheng
- [Xen-users] Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2, Dell R610, Konrad Rzeszutek Wilk
- Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2,	Dell R610, Luwei Cheng
- [Xen-users] Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2, Dell R610, Konrad Rzeszutek Wilk
 - Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2,	Dell R610, Luwei Cheng
 - Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2,	Dell R610, Luwei Cheng
 - [Xen-users] Re: [Xen-API] bnx2 driver failed in	linux-2.6.18.8-xen-3.4.2, Dell R610, Bruce Edge
 - Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2,	Dell R610,
Luwei Cheng <=
 - Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2, Dell	R610, Pasi Kärkkäinen
 - Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2,	Dell R610, Luwei Cheng
 - [Xen-users] Re: [Xen-API] bnx2 driver failed in	linux-2.6.18.8-xen-3.4.2, Dell R610, Pasi Kärkkäinen
 - Re: [Xen-API] bnx2 driver failed in linux-2.6.18.8-xen-3.4.2,	Dell R610, Luwei Cheng
 
  
  
  
 
 |  
  
 | 
    |