|
xen-users
RE: [Xen-devel] Re: [Xen-users] Re: Xen 4.0 - Support for Citrix WHQL-ce
Gio,
What tools are you using to create your VM? I’m guessing
xm/xend. What happens if you use xl?
Paul
From: Giovanni Bellac
[mailto:giovannib1979@xxxxxxxxx]
Sent: 07 September 2010 08:53
To: Paul Durrant
Cc: xen-users@xxxxxxxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: AW: [Xen-devel] Re: [Xen-users] Re: Xen 4.0 - Support for
Citrix WHQL-certified Windows PV drivers
Hello
> Since these is actually no fe driver for vfb, I suggest you just make sure
this node does not exist.
sorry, but I do not understand that 100%
I have one domU with one LVM partition created. There is no other domU or LVM
partition on this system.
Best regards
Gio
Von: Paul Durrant
<Paul.Durrant@xxxxxxxxxx>
An: Pasi Kärkkäinen <pasik@xxxxxx>; Giovanni Bellac
<giovannib1979@xxxxxxxxx>
CC: "xen-devel@xxxxxxxxxxxxxxxxxxx"
<xen-devel@xxxxxxxxxxxxxxxxxxx>;
"xen-users@xxxxxxxxxxxxxxxxxxx" <xen-users@xxxxxxxxxxxxxxxxxxx>
Gesendet: Montag, den 6. September 2010, 17:45:57 Uhr
Betreff: RE: [Xen-devel] Re: [Xen-users] Re: Xen 4.0 - Support for
Citrix WHQL-certified Windows PV drivers
The problem is that your tools are creating a /local/domain/vfb/0 node in
xenstore. The PV drivers try to gracefully close down the backend for this
using the same fe closing -> be closing -> fe closed -> be closed
state dance that it uses for vifs and this is not working.
Since these is actually no fe driver for vfb, I suggest you just make sure this
node does not exist.
Paul
> -----Original Message-----
> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-
> bounces@xxxxxxxxxxxxxxxxxxx]
On Behalf Of Pasi Kärkkäinen
> Sent: 06 September 2010 16:31
> To: Giovanni Bellac
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx;
xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-devel] Re: [Xen-users] Re: Xen 4.0 - Support for
> Citrix WHQL-certified Windows PV drivers
>
> On Mon, Sep 06, 2010 at 03:23:31PM +0000, Giovanni Bellac wrote:
> > Hello
> >
> > I have done some new tests:
> >
> > - XEN 4.0.1 (self compiled, "make world") +
2.6.32.21 from
> Jeremy
> > - Windows 2008 R2 64Bit
> > with windows PV drivers from XCP 0.5 and the regedit
change
> from here:
> > [1]http://xenbits.xen.org/xen-4.0-testing.hg?rev/be9b8be3c648
> >
> > Same error:
> > ...
> > XENUTIL: WARNING: CloseFrontend: timed out in
> > XenbusWaitForBackendStateChange:
> /local/domain/0/backend/vfb/9/0 in state
> > INITIALISING; retry.
> > XENUTIL: WARNING: CloseFrontend: timed out in
> > XenbusWaitForBackendStateChange:
> /local/domain/0/backend/vfb/9/0 in state
> > INITIALISING; retry.
> > XENUTIL: WARNING: CloseFrontend: timed out in
> > XenbusWaitForBackendStateChange:
> /local/domain/0/backend/vfb/9/0 in state
> > INITIALISING; retry.
> > XENUTIL: WARNING: CloseFrontend: timed out in
> > XenbusWaitForBackendStateChange:
> /local/domain/0/backend/vfb/9/0 in state
> > INITIALISING; retry.
> > XENUTIL: WARNING: CloseFrontend: timed out in
> > XenbusWaitForBackendStateChange:
> /local/domain/0/backend/vfb/9/0 in state
> > INITIALISING; retry.
> > XENUTIL: WARNING: CloseFrontend: timed out in
> > XenbusWaitForBackendStateChange:
> /local/domain/0/backend/vfb/9/0 in state
> > INITIALISING; retry.
> > ...
> >
> > I can not download XCP 0.1.1 to test the windows PV
drivers
> from it,
> > because it is not downloadable anymore.
> > But I have read here in the lists, that the XCP 0.1.1
drivers
> are not
> > fully signed.
> >
> > So the feature
> >
> > "Support for Citrix WHQL-certified Windows PV
drivers, included
> in XCP
> > (Xen Cloud Platform). Xen Cloud Platform:
> > [2]http://www.xen.org/products/cloudxen.html"
> >
> > is not really working... :(
> >
>
> Added xen-devel to CC list.. maybe someone from Citrix
> has an idea why it doesn't work.
>
> -- Pasi
>
>
>
> > Best regards
> > Gio
> >
> >
---------------------------------------------------------------
> -----------
> >
> > Von: Pasi Kärkkäinen <pasik@xxxxxx>
> > An: Keith Coleman <list.keith@xxxxxxxxxxx>
> > CC: Dave Scott <Dave.Scott@xxxxxxxxxxxxx>; benco
> <benco@xxxxxxx>; Xen List
> > <xen-users@xxxxxxxxxxxxxxxxxxx>;
Mark Adams <mark@campbell-
> lange.net>
> > Gesendet: Freitag, den 3. September 2010, 9:26:17 Uhr
> > Betreff: Re: [Xen-users] Re: Xen 4.0 - Support for
Citrix WHQL-
> certified
> > Windows PV drivers
> > On Thu, Sep 02, 2010 at 05:14:53PM -0400, Keith Coleman
wrote:
> > > On Thu, Sep 2, 2010 at 1:31 PM, Pasi Kärkkäinen
> <[3]pasik@xxxxxx> wrote:
> > > > On Thu, Sep 02, 2010 at 05:21:02PM +0100, Mark
Adams wrote:
> > > >> Xen 4.0.1 rc3, didn't change any registry
settings. Can
> you confirm
> > what
> > > >> needs to be changed or send a link?
> > > >>
> > > >
> > > > It's mentioned in the xen-4.0 hg changelog:
> > > > [4]http://xenbits.xen.org/xen-4.0-
> testing.hg?rev/be9b8be3c648
> > > >
> > >
> > > The signed windows drivers from XCP 0.5 are not ready
for
> normal xen.
> > > Use the windows drivers from XCP 0.1.1, instead.
> > >
> >
> > Are there some additional changes required to Xen 4.0 to
> support XCP 0.5
> > winpv drivers?
> >
> > -- Pasi
> >
> > _______________________________________________
> > Xen-users mailing list
> > [5]Xen-users@xxxxxxxxxxxxxxxxxxx
> > [6]http://lists.xensource.com/xen-users
> >
> > References
> >
> > Visible links
> > 1. http://xenbits.xen.org/xen-4.0-testing.hg?rev/be9b8be3c648
> > 2. http://www.xen.org/products/cloudxen.html
> > 3. mailto:pasik@xxxxxx
> > 4. http://xenbits.xen.org/xen-4.0-testing.hg?rev/be9b8be3c648
> > 5. mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
> > 6. http://lists.xensource.com/xen-users
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
|
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
Home