OK.
kernel = "/usr/lib/xen/boot/hvmloader"
builder = 'hvm'
name = "vhdtest"
memory = 1024
disk = [ 'tap:tapdisk:vhd:/etc/test/test.vhd,hda,w' ]
vif = [ 'type=ioemu, bridge=eth0' ]
vcpus=8
on_reboot = 'restart'
on_crash = 'restart'
sdl=0
vnc=1
vnclisten="0.0.0.0"
vncdisplay=24
stdvga=0
serial='pty'
usbdevice='tablet'
On Thu, Aug 19, 2010 at 11:14 PM, Gilberto Nunes
<gilberto.nunes@xxxxxxxxxxxxxxx> wrote:
> can u post the whole cfg of Xen VM that u using????
>
> Thanks
>
> Em Qui, 2010-08-19 às 23:08 +0800, ma qiang escreveu:
>> Yes, I did replace it by my vm image. In my system it
>> is /etc/test/test.vhd, which test.vhd is generated by xenconvert.
>> I double confirmed that.
>>
>>
>> On Thu, Aug 19, 2010 at 7:26 PM, Gilberto Nunes
>> <gilberto.nunes@xxxxxxxxxxxxxxx> wrote:
>> Hi
>>
>> Do you need change the path of VM image...
>> /images/test.vhd is for my system...
>> Change this for mach your system...
>> I hope work properly
>>
>>
>> Em Qui, 2010-08-19 às 16:39 +0800, ma qiang escreveu:
>>
>> > Thanks for your question and answers.
>> > I did this thing as your steps, and change disk to disk = [
>> > 'tap:tapdisk:vhd:/images/test.vhd,hda,w' ].
>> >
>> > but when I type "xm create cfgfile". Information about "Device 768
>> > ...tap... vhd:/images/test.vhd does not existed"
>> >
>> > Another question, I have install xen 4.0.0 from
>> > http://www.gitco.de/repo/xen4.0.0 using yum, after that the dom0
>> can
>> > not connect network? and other guest cannot connect network
>> > suceessfully.
>> >
>> > That's why?
>> >
>> > Thanks a lot!
>> >
>> > Qiang Ma
>> >
>> >
>> > On Thu, Aug 12, 2010 at 7:54 PM, Gilberto Nunes
>> > <gilberto.nunes@xxxxxxxxxxxxxxx> wrote:
>> > > Oh! I see! I found my misstake...
>> > > I must change disk from file to tap!
>> > >
>> > > Thanks for that Denis!
>> > >
>> > >
>> > > Em Qui, 2010-08-12 às 08:16 -0300, Gilberto Nunes escreveu:
>> > >> Hi Denis
>> > >>
>> > >> I try this...
>> > >> I conert the physical to VHD format, and try deploy a VM like
>> this:
>> > >> kernel = "hvmloader"
>> > >> builder='hvm'
>> > >> memory = 512
>> > >> name = "test"
>> > >> vif = [ 'type=ioemu, bridge=xenbr0' ]
>> > >> disk = [ 'file:/images/test.vhd,hda,w' ]
>> > >> on_poweroff = 'destroy'
>> > >> on_reboot = 'restart'
>> > >> on_crash = 'restart'
>> > >> device_model = 'qemu-dm'
>> > >> boot="c"
>> > >> sdl=0
>> > >> opengl=1
>> > >> vnc=1
>> > >> vncpasswd=''
>> > >> stdvga=0
>> > >> serial='pty'
>> > >> tsc_mode=0
>> > >>
>> > >> But doesn't work
>> > >>
>> > >> Perhaps is something that I do wrong...
>> > >>
>> > >> Thanks for any advice
>> > >>
>> > >> Em Qui, 2010-08-12 às 11:13 +0200, Denis Cardon escreveu:
>> > >> > Hi Gilberto,
>> > >> >
>> > >> > > I have installed Xen 4 on Debian Lenny 5.0.
>> > >> > > I have a physical Windows 2003 Server and I wanna convert
>> this server on
>> > >> > > a virtual server...
>> > >> > > I try to use XenConvert but without sucsess...
>> > >> > >
>> > >> > > Somebody can help???
>> > >> >
>> > >> > XenConvert is mainly focused on XenServer/XCP. It can create
>> OVF, XVA,
>> > >> > and VHD packages or make direct transfert. I don't think
>> OVH/XVA and
>> > >> > direct transfert are supported by bare Xen. However I think
>> you should
>> > >> > be able to use VHD (Microsoft format) (from
>> > >> > http://wiki.xensource.com/xenwiki/Xen4.0 : "blktap2 for VHD
>> image
>> > >> > support, including high-performance snapshots and cloning.
>> Wiki link:
>> > >> > blktap2 ")
>> > >> >
>> > >> > Cheers,
>> > >> >
>> > >> > Denis
>> > >> >
>> > >> >
>> > >> > > Thanks
>> > >> > >
>> > >> > >
>> > >> > > Gilberto Nunes
>> > >> > > TI
>> > >> > > Selbetti Gestão de Documentos
>> > >> > > Telefone: +55 (47) 3441-6004
>> > >> > > Celular: +55 (47) 8861-6672
>> > >> > >
>> > >> > >
>> > >> > >
>> > >> > >
>> > >> > > _______________________________________________
>> > >> > > Xen-users mailing list
>> > >> > > Xen-users@xxxxxxxxxxxxxxxxxxx
>> > >> > > http://lists.xensource.com/xen-users
>> > >> >
>> > >> >
>> > >>
>> > >> Gilberto Nunes
>> > >> TI
>> > >> Selbetti Gestão de Documentos
>> > >> Telefone: +55 (47) 3441-6004
>> > >> Celular: +55 (47) 8861-6672
>> > >>
>> > >>
>> > >>
>> > >>
>> > >> _______________________________________________
>> > >> Xen-users mailing list
>> > >> Xen-users@xxxxxxxxxxxxxxxxxxx
>> > >> http://lists.xensource.com/xen-users
>> > >
>> > > Gilberto Nunes
>> > > TI
>> > > Selbetti Gestão de Documentos
>> > > Telefone: +55 (47) 3441-6004
>> > > Celular: +55 (47) 8861-6672
>> > >
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > Xen-users mailing list
>> > > Xen-users@xxxxxxxxxxxxxxxxxxx
>> > > http://lists.xensource.com/xen-users
>> > >
>>
>> Gilberto Nunes
>> TI
>> Selbetti Gestão de Documentos
>> Telefone: +55 (47) 3441-6004
>> Celular: +55 (47) 8861-6672
>>
>>
>>
>>
>
> Gilberto Nunes
> TI
> Selbetti Gestão de Documentos
> Telefone: +55 (47) 3441-6004
> Celular: +55 (47) 8861-6672
>
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home