| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] No access to hwclock on Dom0 / Xen 4.0.1-rc5-pre / pv_op
Fajar,
You are a star! That did the trick.
Unfortunately it won't persist after reboot but adding those lines to
/etc/rc.local is a nice quick fix.
Thanks again.
Iain Kay
On 1 Aug 2010, at 19:06, Fajar A. Nugraha wrote:
> On Mon, Aug 2, 2010 at 12:57 AM, Iain Kay <i.kay@xxxxxx> wrote:
>> Here's what happens:
>> [root@indigo ~]# hwclock --systohc
>> Cannot access the Hardware Clock via any known method.
>> Use the --debug option to see the details of our search for an access method.
>> [root@indigo ~]#
>>
>> I was able to use the hwclock command fine before booting the Xen pv_ops
>> kernel. I have gone through kernel config lines and ensured that
>> CONFIG_RTC_...etc is enabled, have tried compiling the modules for rtc
>> drivers and loading them one by one but to no avail.
>>
>> Any input would be greatly appreciated.
>
> Try this:
> mv /dev/rtc /dev/rtc.old
> cp -a /dev/rtc0 /dev/rtc
> hwclock --systohc
>
> --
> Fajar
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home