Re: [Xen-users] Using eth1 instead eth0

[Bart Coninckx <bart.coninckx@xxxxxxxxxx>]

On Saturday 10 July 2010 21:18:09 Net Warrior wrote:
> Hi there.
> 
> I've got two ethers, eth0 wihich work properly and my DomU goes outside
> as well, now, I've got eth1 and I like to use it
> to go outside but is not working at this time, I tried adding eth1 to
> the bridge and changing bridge=eth1 in the DomU
> config file, or do I have to create another bridge called eth1?
> 
> 
> eth0 192.168.0.100 - dhcp  - Works good.
> eth1 192.168.0.10 - static -  No luck
> 
> Any adivce?
> Regards
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 

Just create a new bridge. If you replace the networks scripts in xend-
config.sxp by one that creates all the necessary bridges, you're good to go. 
I replaced it for instance by a script with:

/etc/xen/scripts/network-bridge start netdev=eth0 bridge=eth0
/etc/xen/scripts/network-bridge start netdev=eth3 bridge=eth3

Good luck,

B.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users