Hi Matej,
Technical support tell me that Hyper-V is enabled.
Is this enough?
xm dmesg messages show that is xen capable.
Can I review something else ?
El 22/06/2010 11:22 a.m., Matej Zary escribió:
> Do you have virtualisation support enabled in your BIOS (VT-i, VT-d...)?
>
>
>
> Regards
>
> Matej
>
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Armando Montiel
> Caba
> Sent: Tuesday, June 22, 2010 5:59 PM
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] The Host cpu(s) in this machine do not have support for
> full virtualization
>
> I'm geting this message from virt-manager.
>
> Server: SuperMicro X8SIL with INTEL X3440
>
> Here is my logs
>
>
> /var/log/dmesg:
>
> Bootdata ok (command line is ro root=/dev/md2) Linux version
> 2.6.18-194.3.1.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2
> 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13
> 13:49:53 EDT 2010
> BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000001dc26c000 (usable) On node 0 totalpages:
> 1950316
> DMA zone: 1950316 pages, LIFO batch:31 DMI present.
> ACPI: RSDP (v002 ACPIAM ) @
> 0x00000000000fa110
> ACPI: XSDT (v001 SMCI 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7a0100
> ACPI: FADT (v003 022510 FACP1918 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7a0290
> ACPI: MADT (v001 022510 APIC1918 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7a0390
> ACPI: MCFG (v001 022510 OEMMCFG 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7a0430
> ACPI: OEMB (v001 022510 OEMB1918 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7ae040
> ACPI: HPET (v001 022510 OEMHPET 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7aa5f0
> ACPI: GSCI (v001 022510 GMCHSCI 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7ae0c0
> ACPI: DMAR (v001 AMI OEMDMAR 0x00000001 MSFT 0x00000097) @
> 0x00000000bf7b00f0
> ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20051117) @
> 0x00000000bf7b2800
> ACPI: EINJ (v001 AMIER AMI_EINJ 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7aa630
> ACPI: BERT (v001 AMIER AMI_BERT 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7aa7c0
> ACPI: ERST (v001 AMIER AMI_ERST 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7aa7f0
> ACPI: HEST (v001 AMIER ABC_HEST 0x20100225 MSFT 0x00000097) @
> 0x00000000bf7aa9a0
> ACPI: DSDT (v001 10605 10605000 0x00000000 INTL 0x20051117) @
> 0x0000000000000000
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to xen
> Using ACPI (MADT) for SMP configuration information Allocating PCI resources
> starting at c2000000 (gap: c0000000:20000000) Built 1 zonelists. Total
> pages: 1950316 Kernel command line: ro root=/dev/md2 Initializing CPU#0 PID
> hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2533.406 MHz
> processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO
> TLB enabled:
> Aperture: 64 megabytes
> Kernel range: 0xffff88000a357000 - 0xffff88000e357000
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> Memory: 7563760k/7801264k available (2512k kernel code, 228628k reserved,
> 1396k data, 184k init) Calibrating delay using timer specific routine..
> 6334.75 BogoMIPS
> (lpj=12669518)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 256K
> CPU: L3 cache: 8192K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> (SMP-)alternatives turned off
> ACPI: Core revision 20060707
> Initializing CPU#1
> Initializing CPU#2
> Initializing CPU#3
> Initializing CPU#4
> Initializing CPU#5
> Initializing CPU#6
> Brought up 8 CPUs
> sizeof(vma)=168 bytes
> sizeof(page)=56 bytes
> sizeof(inode)=560 bytes
> sizeof(dentry)=216 bytes
> sizeof(ext3inode)=760 bytes
> sizeof(buffer_head)=96 bytes
> sizeof(skbuff)=248 bytes
> Initializing CPU#7
> migration_cost=15
> checking if image is initramfs... it is
> Grant table initialized
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) Linux Plug and
> Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 15 devices
> xen_mem: Initialising balloon driver.
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> pnp: 00:08: ioport range 0x164e-0x164f has been reserved
> pnp: 00:09: ioport range 0xa00-0xa0f has been reserved
> pnp: 00:09: ioport range 0xa10-0xa1f has been reserved
> PCI: Bridge: 0000:00:03.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:05.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.4
> IO window: d000-dfff
> MEM window: fb500000-fb5fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.5
> IO window: e000-efff
> MEM window: fb600000-fb6fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1e.0
> IO window: disabled.
> MEM window: fb700000-fbffffff
> PREFETCH window 0x00000000fa000000-0x00000000faffffff
> GSI 16 sharing vector 0x98 and IRQ 16
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:05.0 to 64 GSI 17 sharing vector
> 0xA0 and IRQ 17
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.4 to 64
> ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.5 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP
> established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind
> hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536) TCP reno
> registered
> audit: initializing netlink socket (disabled) type=2000
> audit(1277201045.924:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> alg: No test for crc32c (crc32c-generic)
> ksign: Installing public key data
> Loading keyring
> - Added public key 7664334D64FC7447
> - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io
> scheduler anticipatory registered io scheduler deadline registered io
> scheduler cfq registered (default) Boot video device is 0000:06:03.0
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> PCI: Setting latency timer of device 0000:00:1c.4 to 64
> PCI: Setting latency timer of device 0000:00:1c.5 to 64
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI (exconfig-0456): Dynamic
> SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707] ACPI
> (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst]
> [20060707]
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) Real Time Clock Driver v1.12ac
> hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> brd: module loaded
> Xen virtual console successfully installed as ttyS0 Event-channel device
> installed.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Initalizing network drop monitor service Write protecting the kernel
> read-only data: 483k GSI 18 sharing vector 0xD0 and IRQ 18
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1d.0 to 64 ehci_hcd
> 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus
> registered, assigned bus number 1 ehci_hcd 0000:00:1d.0: debug port 2
> PCI: cache line size of 32 is not supported by device 0000:00:1d.0 ehci_hcd
> 0000:00:1d.0: irq 18, io mem 0xfb4fc000 ehci_hcd 0000:00:1d.0: USB 2.0
> started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from
> 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> USB Universal Host Controller Interface driver v3.0
> md: raid1 personality registered for level 1 SCSI subsystem initialized
> libata version 3.00 loaded.
> ata_piix 0000:00:1f.2: version 2.12
> GSI 19 sharing vector 0xD8 and IRQ 19
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix
> 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
> ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 usb 1-1:
> new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration
> #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 8 ports
> detected
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
> ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata1.00: configured for UDMA/133
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
> ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata2.00: configured for UDMA/133
> Vendor: ATA Model: WDC WD1002FBYS-0 Rev: 03.0
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back SCSI device sda: 1953525168 512-byte
> hdwr sectors (1000205 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
> sd 0:0:0:0: Attached scsi disk sda
> Vendor: ATA Model: WDC WD1002FBYS-0 Rev: 03.0
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back SCSI device sdb: 1953525168 512-byte
> hdwr sectors (1000205 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3
> sd 1:0:0:0: Attached scsi disk sdb
> ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix
> 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
> ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
> ata3: SATA link down (SStatus 0 SControl 300)
> ata4: SATA link down (SStatus 0 SControl 300) Initializing USB Mass Storage
> driver...
> usbcore: registered new driver usb-storage USB Mass Storage support
> registered.
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised:
> dm-devel@xxxxxxxxxx
> device-mapper: dm-raid45: initialized v0.2594l
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: considering sdb3 ...
> md: adding sdb3 ...
> md: sdb2 has different UUID to sdb3
> md: sdb1 has different UUID to sdb3
> md: adding sda3 ...
> md: sda2 has different UUID to sdb3
> md: sda1 has different UUID to sdb3
> md: created md2
> md: bind<sda3>
> md: bind<sdb3>
> md: running: <sdb3><sda3>
> raid1: raid set md2 active with 2 out of 2 mirrors
> md: considering sdb2 ...
> md: adding sdb2 ...
> md: sdb1 has different UUID to sdb2
> md: adding sda2 ...
> md: sda1 has different UUID to sdb2
> md: created md1
> md: bind<sda2>
> md: bind<sdb2>
> md: running: <sdb2><sda2>
> raid1: raid set md1 active with 2 out of 2 mirrors
> md: considering sdb1 ...
> md: adding sdb1 ...
> md: adding sda1 ...
> md: created md0
> md: bind<sda1>
> md: bind<sdb1>
> md: running: <sdb1><sda1>
> raid1: raid set md0 active with 2 out of 2 mirrors
> md: ... autorun DONE.
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: Disabled at runtime.
> SELinux: Unregistering netfilter hooks
> type=1404 audit(1277201077.722:2): selinux=0 auid=4294967295 ses=4294967295
> input: PC Speaker as /class/input/input0 sd 0:0:0:0: Attached scsi generic
> sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> eth0: (PCI Express:2.5GB/s:Width x1) 00:25:90:04:78:74
> eth0: Intel(R) PRO/1000 Network Connection
> eth0: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
> ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:05:00.0 to 64
> eth1: (PCI Express:2.5GB/s:Width x1) 00:25:90:04:78:75
> eth1: Intel(R) PRO/1000 Network Connection
> eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff GSI 20 sharing vector 0x51 and IRQ 20
> ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> floppy0: no floppy controllers found
> lp: driver loaded but no devices found
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Mapper loaded
> dell-wmi: No known WMI GUID found
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> device-mapper: multipath: version 1.0.5 loaded
> loop: loaded (max 8 devices)
> EXT3 FS on md2, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on md0, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 8193016k swap on /dev/md1. Priority:-1 extents:1 across:8193016k*
>
> *
>
> # cat /var/log/xen/console/hypervisor.log (xm dmesg)
> __ __ _____ _ ____ _ ___ _ _ _____ _ _ ____
> \ \/ /___ _ __ |___ / / | |___ \ / |/ _ \| || | |___ / / | ___| |
> ___|
> \ // _ \ '_ \ |_ \ | | __) |__| | (_) | || |_ |_ \ | | / _ \
> |___ \
> / \ __/ | | | ___) || |_ / __/|__| |\__, |__ _| ___) || || __/
> |___) |
> /_/\_\___|_| |_| |____(_)_(_)_____| |_| /_/
> |_|(_)____(_)_(_)___|_|____/
>
> http://www.cl.cam.ac.uk/netos/xen
> University of Cambridge Computer Laboratory
>
> Xen version 3.1.2-194.3.1.el5 (mockbuild@xxxxxxxxxx) (gcc version 4.1.2
> 20080704 (Red Hat 4.1.2-48)) Thu May 13 12:59:18 EDT 2010 Latest ChangeSet:
> unavailable
>
> (XEN) Command line:
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 2 MBR signatures
> (XEN) Found 2 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009ec00 (usable)
> (XEN) 000000000009ec00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000bf790000 (usable)
> (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9
> (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data)
> (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS)
> (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved)
> (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved)
> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
> (XEN) 00000000fed20000 - 00000000fed40000 (reserved)
> (XEN) 00000000fee00000 - 00000000fee01000 (reserved)
> (XEN) 0000000100000000 - 0000000240000000 (usable)
> (XEN) System RAM: 8183MB (8379576kB)
> (XEN) Xen heap: 13MB (13712kB)
> (XEN) Domain heap initialised: DMA width 32 bits
> (XEN) Processor #0 7:14 APIC version 21
> (XEN) Processor #2 7:14 APIC version 21
> (XEN) Processor #4 7:14 APIC version 21
> (XEN) Processor #6 7:14 APIC version 21
> (XEN) Processor #1 7:14 APIC version 21
> (XEN) Processor #3 7:14 APIC version 21
> (XEN) Processor #5 7:14 APIC version 21
> (XEN) Processor #7 7:14 APIC version 21
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2533.407 MHz processor.
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging detected and enabled.
> (XEN) VMX: MSR intercept bitmap enabled
> (XEN) I/O virtualisation disabled
> (XEN) CPU0: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Booting processor 1/2 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU1: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Booting processor 2/4 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU2: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Booting processor 3/6 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU3: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Booting processor 4/1 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU4: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Booting processor 5/3 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU5: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Booting processor 6/5 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU6: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Booting processor 7/7 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU7: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
> (XEN) Total of 8 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) Platform timer overflows in 14998 jiffies.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Brought up 8 CPUs
> (XEN) xenoprof: Initialization failed. Intel processor model 30 for P6 class
> family is not supported
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2f3d70
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff804f3d80 memsz=0x14c510
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff80641000 memsz=0xc08
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff80642000 memsz=0x11becc
> (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff8075decc
> (XEN) elf_xen_parse_note: GUEST_OS = "linux"
> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000
> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000
> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000
> (XEN) elf_xen_parse_note: FEATURES =
> "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
> (XEN) elf_xen_parse_note: LOADER = "generic"
> (XEN) elf_xen_addr_calc_check: addresses:
> (XEN) virt_base = 0xffffffff80000000
> (XEN) elf_paddr_offset = 0xffffffff80000000
> (XEN) virt_offset = 0x0
> (XEN) virt_kstart = 0xffffffff80200000
> (XEN) virt_kend = 0xffffffff8075decc
> (XEN) virt_entry = 0xffffffff80200000
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
> 0xffffffff8075decc
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000232000000->0000000234000000 (1940076 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff80200000->ffffffff8075decc
> (XEN) Init. ramdisk: ffffffff8075e000->ffffffff80e0d800
> (XEN) Phys-Mach map: ffffffff80e0e000->ffffffff81ceb360
> (XEN) Start info: ffffffff81cec000->ffffffff81cec49c
> (XEN) Page tables: ffffffff81ced000->ffffffff81d00000
> (XEN) Boot stack: ffffffff81d00000->ffffffff81d01000
> (XEN) TOTAL: ffffffff80000000->ffffffff82000000
> (XEN) ENTRY ADDRESS: ffffffff80200000
> (XEN) Dom0 has maximum 8 VCPUs
> (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804f3d70
> (XEN) elf_load_binary: phdr 1 at 0xffffffff804f3d80 -> 0xffffffff80640290
> (XEN) elf_load_binary: phdr 2 at 0xffffffff80641000 -> 0xffffffff80641c08
> (XEN) elf_load_binary: phdr 3 at 0xffffffff80642000 -> 0xffffffff8067f0a8
> (XEN) Initrd len 0x6af800, start at 0xffffffff8075e000
> (XEN) Scrubbing Free RAM: ...done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
> Xen).
> (XEN) Freed 112kB init memory.
>
> # rpm -qa | grep -i xen
> xen-libs-3.0.3-105.el5_5.3
> xen-libs-3.0.3-105.el5_5.3
> xen-3.0.3-105.el5_5.3
> kernel-xen-2.6.18-194.3.1.el5
>
> # rpm -qa | grep -i virt
> libvirt-0.6.3-33.el5
> python-virtinst-0.400.3-9.el5
> libvirt-python-0.6.3-33.el5
> libvirt-0.6.3-33.el5
> virt-manager-0.6.1-12.el5
> virt-viewer-0.0.2-3.el5
>
> # cat /var/log/xen/xend.log
>
> [2010-06-22 06:03:25 xend 3184] INFO (SrvDaemon:190) Xend stopped due to
> signal 15.
> [2010-06-22 06:05:02 xend 3166] INFO (SrvDaemon:283) Xend Daemon started
> [2010-06-22 06:05:02 xend 3166] INFO (SrvDaemon:287) Xend changeset:
> unavailable.
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:229) XendDomainInfo.recreate({'paused': 0, 'cpu_time':
> 11234791979L, 'ssidref': 0, 'hvm': 0, 'shutdown_reason': 0, 'dying': 0,
> 'mem_kb': 7793072L, 'domid': 0, 'max_vcpu_id': 7, 'crashed': 0,
> 'running': 1, 'maxmem_kb': 17179869180L, 'shutdown': 0, 'online_vcpus':
> 8, 'handle': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
> 'blocked': 0})
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] INFO (XendDomainInfo:241)
> Recreating domain 0, UUID 00000000-0000-0000-0000-000000000000.
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] WARNING
> (XendDomainInfo:263) No vm path in store for existing domain 0
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid':
> '00000000-0000-0000-0000-000000000000', 'on_reboot': 'restart',
> 'on_poweroff': 'destroy', 'name': 'Domain-0', 'xend/restart_count': '0',
> 'vcpus': '8', 'vcpu_avail': '255', 'memory': '7611', 'on_crash':
> 'restart', 'maxmem': '7611'}
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:1028) Storing domain details: {'cpu/1/availability':
> 'online', 'cpu/3/availability': 'online', 'name': 'Domain-0',
> 'console/limit': '1048576', 'cpu/2/availability': 'online', 'vm':
> '/vm/00000000-0000-0000-0000-000000000000', 'domid': '0',
> 'cpu/7/availability': 'online', 'cpu/0/availability': 'online',
> 'memory/target': '7793664', 'cpu/5/availability': 'online',
> 'cpu/6/availability': 'online', 'cpu/4/availability': 'online'}
> [2010-06-22 06:05:02 xend 3166] DEBUG (XendDomain:164) number of vcpus to use
> is 0
> [2010-06-22 06:05:02 xend 3166] INFO (SrvServer:116) unix
> path=/var/lib/xend/xend-socket
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch
amontiel.vcf
Description: Vcard
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home