[Xen-users] SLES11 Guest on SLES10 DomU. Call Trace upon boot of Xen Guest - Request to identify cause

[J4 <junk4@xxxxxxxxxxxx>]

Dear all,

    I just installed a SLES 11 guest.  I have noticed this call Trace
message when it reboots.  Did I miss some modules?
Call Trace:
 [<ffffffff8020c597>] show_trace_log_lvl+0x41/0x58
 [<ffffffff8046357f>] dump_stack+0x69/0x6f
 [<ffffffff802327ca>] warn_on_slowpath+0x51/0x77
 [<ffffffff803c6ded>] xenfb_update_screen+0x12d/0x177
 [<ffffffff803c6f04>] xenfb_thread+0xcd/0x196
 [<ffffffff80246214>] kthread+0x47/0x73
 [<ffffffff8020bd19>] child_rip+0xa/0x11

---[ end trace af2fb56052b14f5e ]---

Shall summerize if emails are taken off list.
Best regards, S.


Full boot messages listed here:-
 # xm console t2nl-app067
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
SMP alternatives: switching to UP code
Brought up 1 CPUs
net_namespace: 1936 bytes
NET: Registered protocol family 16
SMP alternatives: switching to SMP code
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Brought up 2 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
suspend: event channel 13
xen_mem: Initialising balloon driver.
PCI: System does not support PCI
PCI: System does not support PCI
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 11840k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1276847275.779:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 261
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Non-volatile memory driver v1.2
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Console: switching to colour frame buffer device 100x37
console [tty0] enabled
input: Xen Virtual Keyboard as /devices/virtual/input/input0
input: Xen Virtual Pointer as /devices/virtual/input/input1
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP cubic registered
registered taskstats version 1
XENBUS: Device with no driver: device/console/0
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 4420k
xen-vbd: registered block device major 202
blkfront: xvda: barriers enabled
 xvda: xvda1 xvda2
thermal: Unknown symbol acpi_processor_set_thermal_limit
netfront: Initialising virtual ethernet driver.
udevd version 128 started
kjournald starting.  Commit interval 5 seconds
EXT3 FS on xvda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 128 started
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
Adding 586332k swap on /dev/xvda1.  Priority:-1 extents:1 across:586332k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@xxxxxxxxxx
loop: module loaded
fuse init (API version 7.9)
type=1505 audit(1276847278.691:2): operation="profile_load"
name="/bin/ping" name2="default" pid=986
type=1505 audit(1276847278.723:3): operation="profile_load"
name="/sbin/klogd" name2="default" pid=998
type=1505 audit(1276847278.803:4): operation="profile_load"
name="/sbin/syslog-ng" name2="default" pid=1012
type=1505 audit(1276847278.873:5): operation="profile_load"
name="/sbin/syslogd" name2="default" pid=1035
type=1505 audit(1276847278.938:6): operation="profile_load"
name="/usr/sbin/avahi-daemon" name2="default" pid=1047
type=1505 audit(1276847278.995:7): operation="profile_load"
name="/usr/sbin/identd" name2="default" pid=1048
type=1505 audit(1276847279.053:8): operation="profile_load"
name="/usr/sbin/mdnsd" name2="default" pid=1049
type=1505 audit(1276847279.118:9): operation="profile_load"
name="/usr/sbin/nscd" name2="default" pid=1050
type=1505 audit(1276847279.212:10): operation="profile_load"
name="/usr/sbin/ntpd" name2="default" pid=1051
IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxxxxxxxxxxx>
firmware: requesting intel-ucode/06-0f-0b
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (4608 buckets, 18432 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xenfb_update_screen bogus rect 2147483647 0 2147483647 0
------------[ cut here ]------------
WARNING: at drivers/xen/fbfront/xenfb.c:242
xenfb_update_screen+0x12d/0x177()
Modules linked in: xt_NOTRACK ipt_REJECT xt_state iptable_raw
iptable_filter nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack
ip_tables ip6_tables x_tables microcode fuse loop dm_mod joydev rtc_core
rtc_lib xennet ext3 mbcache jbd thermal_sys hwmon xenblk cdrom
Supported: Yes
Pid: 24, comm: xenfb thread Not tainted 2.6.27.19-5-xen #1

Call Trace:
 [<ffffffff8020c597>] show_trace_log_lvl+0x41/0x58
 [<ffffffff8046357f>] dump_stack+0x69/0x6f
 [<ffffffff802327ca>] warn_on_slowpath+0x51/0x77
 [<ffffffff803c6ded>] xenfb_update_screen+0x12d/0x177
 [<ffffffff803c6f04>] xenfb_thread+0xcd/0x196
 [<ffffffff80246214>] kthread+0x47/0x73
 [<ffffffff8020bd19>] child_rip+0xa/0x11

---[ end trace af2fb56052b14f5e ]---


Welcome to SUSE Linux Enterprise Server 11 (x86_64) - Kernel
2.6.27.19-5-xen (xvc0).


t2nl-app067 login:

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users