Hi,
I used qemu-dm USB 1.1 passthrough to use a USB mouse on a windows XP
domU. I even installed the gplpv drivers, but performance is still lacking.
Next I wanted to passthrough the whole USB controller using PCI
passthrough, as described here
http://wiki.xensource.com/xenwiki/XenUSBPassthrough.
I've hidden the PCI devices using xen-pciback.hide kernel parameters.
I'm running xen-4.0.0 STABLE on a 2.6.31.13 and debian
2.6.32-5-xen-amd64 kernels, same error happens on both.
xm pci-list-assignable-devices gives
0000:0f:00.0
0000:00:1a.0
0000:00:1a.1
Where 00:1a are the two USB controllers I want to pass through.
See here:
lspci -nn|grep USB
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #4 [8086:3a37]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #5 [8086:3a38]
(....)
The domU fails to come up, here's the qemu-dm log:
domid: 1
config qemu network with xen bridge for tap1.0 eth0
Watching /local/domain/0/device-model/1/logdirty/cmd
Watching /local/domain/0/device-model/1/command
char device redirected to /dev/pts/1
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = a0fd678b-5d01-7a2a-cc3b-8299b25201e1
Time offset set 0
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw
state.
xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
medium change watch on `hdc' (index: 1): /dev/cdrom
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown
device, ignored
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 00:1a.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul:
No such file or directory: 0x0:0x1a.0x1
pt_register_regions: IO region registered (size=0x00000020
base_addr=0x0000d021)
pci_intx: intx=2
register_real_device: Real physical device 00:1a.1 registered successfuly!
IRQ type = INTx
pt_ioport_map: e_phys=c200 pio_base=d020 len=32 index=4 first_map=1
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw
state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro
state.
I haven't tried using pci-stub yet, but I don't think the result will be
different. What's the problem here?
My domU works (more or less ;-) )fine without those two PCI devices
passed through.
regards,
Helmut
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home