WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: Re[2]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravi

To: Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx>
Subject: Re: Re[2]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0
From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
Date: Tue, 1 Jun 2010 10:12:14 -0700 (PDT)
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Tue, 01 Jun 2010 11:07:02 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s1024; t=1275412334; bh=0I2hkJYj1f17SBaBs6++a6MtYDCT4MKLM9qDSX6RO9k=; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=m7anX6DbrkBHKOzC4UHiuBCTUsHNvBMOKRdZi/0A5FU120bQqWzaMk08UH1EKyAqJhC70XAcELVgqHQ6hAAtVOoKdcewvfqL0cu4dxbKUojwMShpCFprv1arzxfhxdXz4678wfcOx0ze+vtMh529uGGpMu0OGrHs1o/pZa+zk9U=
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=GJo4IENmPcZidf/UsDWB+TGFH0Ysrx9qBOv22PjP2dDMvVOokvnpVyXdnP+vxyWaw0+vmU7DEzDhQwwwCeZkGizqciinqOCMa27ZyB+mZ7ZiecjkyMe5UhqY5DpNdLuik9Gfgovau+2UQZdv6dSibSdXUJ+eazghGVut5KwC7xs=;
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <AANLkTikpQ-LxjKlF0pdvQ3LFkdf7ndSphCRhoUKkTXMW@xxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Sorry , i addressed this question doom.

--- On Tue, 6/1/10, Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx> wrote:

From: Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx>
Subject: Re: Re[2]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx, "doom" <doom28@xxxxxxx>
Date: Tuesday, June 1, 2010, 12:13 PM

VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller

Thiago

2010/6/1 Boris Derzhavets <bderzhavets@xxxxxxxxx>
What Intel video chip you have integrated on the board ?

Boris.

--- On Tue, 6/1/10, doom <doom28@xxxxxxx> wrote:

From: doom <doom28@xxxxxxx>
Subject: Re[2]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0
To: xen-users@xxxxxxxxxxxxxxxxxxx
Cc: "Martinx - ジェームズ" <thiagocmartinsc@xxxxxxxxx>
Date: Tuesday, June 1, 2010, 9:10 AM


Hi!

I have processor C2D E8400 on Q35 intel desktop board with integrated GPU, and 2 ethernet cards.

Now, I disable DRM completely. Rebuild the kernel and install again. Now, GUI appear, 

but Xorg print errors and may work in only low resolution. Below I give log Xorg and lspci. And config kernel with xorg  log in attach.




========================


cat /var/log/Xorg.0.log


X.Org X Server 1.7.6

Release Date: 2010-03-17

X Protocol Version 11, Revision 0

Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu

Current Operating System: Linux gnezdo 2.6.32.14 #10 SMP Tue Jun 1 15:54:48 MSD 2010 x86_64

Kernel command line: root=/dev/mapper/raptor--gv-root--lv ro

Build Date: 23 April 2010  05:11:46PM

xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <bryce@xxxxxxxxxx>) 

Current version of pixman: 0.16.4

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun  1 17:02:18 2010

(==) Using config directory: "/usr/lib/X11/xorg.conf.d"

(==) No Layout section.  Using the first Screen section.

(==) No screen section available. Using defaults.

(**) |-->Screen "Default Screen Section" (0)

(**) |   |-->Monitor "<default monitor>"

(==) No monitor specified for screen "Default Screen Section".

Using a default monitor configuration.

(==) Automatically adding devices

(==) Automatically enabling devices

(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

Entry deleted from font path.

(==) FontPath set to:

/usr/share/fonts/X11/misc,

/usr/share/fonts/X11/100dpi/:unscaled,

/usr/share/fonts/X11/75dpi/:unscaled,

/usr/share/fonts/X11/Type1,

/usr/share/fonts/X11/100dpi,

/usr/share/fonts/X11/75dpi,

/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,

built-ins

(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"

(II) The server relies on udev to provide the list of input devices.

If no devices become available, reconfigure udev or disable AutoAddDevices.

(II) Loader magic: 0x7ca300

(II) Module ABI versions:

X.Org ANSI C Emulation: 0.4

X.Org Video Driver: 6.0

X.Org XInput driver : 7.0

X.Org Server Extension : 2.0

(++) using VT number 7


(--) PCI:*(0:0:2:0) 8086:29b2:8086:4f4a Intel Corporation 82Q35 Express Integrated Graphics Controller rev 2, Mem @ 0xe0300000/524288, 0xd0000000/268435456, 0xe0200000/1048576, I/O @ 0x00003458/8

(II) Open ACPI successful (/var/run/acpid.socket)

(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so

(II) Module extmod: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

Module class: X.Org Server Extension

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension MIT-SCREEN-SAVER

(II) Loading extension XFree86-VidModeExtension

(II) Loading extension XFree86-DGA

(II) Loading extension DPMS

(II) Loading extension XVideo

(II) Loading extension XVideo-MotionCompensation

(II) Loading extension X-Resource

(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so

(II) Module dbe: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

Module class: X.Org Server Extension

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension DOUBLE-BUFFER

(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions/libglx.so

(II) Module glx: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

ABI class: X.Org Server Extension, version 2.0

(==) AIGLX enabled

(II) Loading extension GLX

(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions/librecord.so

(II) Module record: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.13.0

Module class: X.Org Server Extension

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension RECORD

(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions/libdri.so

(II) Module dri: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension XFree86-DRI

(II) LoadModule: "dri2"

(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so

(II) Module dri2: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.1.0

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension DRI2

(==) Matched intel as autoconfigured driver 0

(==) Matched vesa as autoconfigured driver 1

(==) Matched fbdev as autoconfigured driver 2

(==) Assigned the driver to the xf86ConfigLayout

(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

(II) Module intel: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 2.9.1

Module class: X.Org Video Driver

ABI class: X.Org Video Driver, version 6.0

(II) LoadModule: "vesa"

(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

(II) Module vesa: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 2.3.0

Module class: X.Org Video Driver

ABI class: X.Org Video Driver, version 6.0

(II) LoadModule: "fbdev"

(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

(II) Module fbdev: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 0.4.1

ABI class: X.Org Video Driver, version 6.0

(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,

i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,

E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,

965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,

4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale

(II) VESA: driver for VESA chipsets: vesa

(II) FBDEV: driver for framebuffer: fbdev

(II) Primary Device is: PCI 00@00:02:0

(WW) Falling back to old probe method for vesa

(WW) Falling back to old probe method for fbdev

(II) Loading sub module "fbdevhw"

(II) LoadModule: "fbdevhw"

(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so

(II) Module fbdevhw: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 0.0.2

ABI class: X.Org Video Driver, version 6.0

(EE) open /dev/fb0: No such file or directory

(II) Loading sub module "vgahw"

(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules/libvgahw.so

(II) Module vgahw: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 0.1.0

ABI class: X.Org Video Driver, version 6.0

(II) Loading sub module "ramdac"

(II) LoadModule: "ramdac"

(II) Module "ramdac" already built-in

drmOpenDevice: node name is /dev/dri/card0

[drm] failed to load kernel module "i915"

(EE) intel(0): [drm] Failed to open DRM device for pci:0000:00:02.0: No such file or directory

(EE) intel(0): Failed to become DRM master.

(II) intel(0): Creating default Display subsection in Screen section

"Default Screen Section" for depth/fbbpp 24/32

(==) intel(0): Depth 24, (--) framebuffer bpp 32

(==) intel(0): RGB weight 888

(==) intel(0): Default visual is TrueColor

(II) intel(0): Integrated Graphics Chipset: Intel(R) Q35

(--) intel(0): Chipset: "Q35"

(--) intel(0): Linear framebuffer at 0xD0000000

(--) intel(0): IO registers at addr 0xE0300000 size 524288

(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB

(II) intel(0): No SDVO device is found in VBT

(II) intel(0): 2 display pipes available.

(II) Loading sub module "ddc"

(II) LoadModule: "ddc"

(II) Module "ddc" already built-in

(II) Loading sub module "i2c"

(II) LoadModule: "i2c"

(II) Module "i2c" already built-in

(II) intel(0): Output VGA has no monitor section

(II) intel(0): I2C bus "CRTDDC_A" initialized.

(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.

(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.

(II) intel(0): I2C bus "CRTDDC_A" removed.

(II) intel(0): EDID for output VGA

(II) intel(0): Manufacturer: NEC  Model: 6662  Serial#: 16843009

(II) intel(0): Year: 2005  Week: 20

(II) intel(0): EDID Version: 1.3

(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V

(II) intel(0): Sync:  Separate  Composite  SyncOnGreen

(II) intel(0): Max Image Size [cm]: horiz.: 38  vert.: 30

(II) intel(0): Gamma: 2.20

(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display

(II) intel(0): First detailed timing is preferred mode

(II) intel(0): redX: 0.640 redY: 0.344   greenX: 0.299 greenY: 0.608

(II) intel(0): blueX: 0.145 blueY: 0.074   whiteX: 0.313 whiteY: 0.329

(II) intel(0): Supported established timings:

(II) intel(0): 720x400@70Hz

(II) intel(0): 640x480@60Hz

(II) intel(0): 640x480@67Hz

(II) intel(0): 640x480@72Hz

(II) intel(0): 640x480@75Hz

(II) intel(0): 800x600@56Hz

(II) intel(0): 800x600@60Hz

(II) intel(0): 800x600@72Hz

(II) intel(0): 800x600@75Hz

(II) intel(0): 832x624@75Hz

(II) intel(0): 1024x768@60Hz

(II) intel(0): 1024x768@70Hz

(II) intel(0): 1024x768@75Hz

(II) intel(0): 1280x1024@75Hz

(II) intel(0): 1152x864@75Hz

(II) intel(0): Manufacturer's mask: 0

(II) intel(0): Supported standard timings:

(II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337

(II) intel(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513

(II) intel(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897

(II) intel(0): Supported detailed timing:

(II) intel(0): clock: 108.0 MHz   Image Size:  376 x 301 mm

(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0

(II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0

(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz

(II) intel(0): Monitor name: LCD1970NX

(II) intel(0): Serial No: 55125437YB

(II) intel(0): EDID (in hex):

(II) intel(0): 00ffffffffffff0038a3626601010101

(II) intel(0): 140f01030e261e78eacb05a3584c9b25

(II) intel(0): 135054bfef80714f8140818001010101

(II) intel(0): 010101010101302a009851002a403070

(II) intel(0): 1300782d1100001e000000fd00384b1f

(II) intel(0): 510e000a202020202020000000fc004c

(II) intel(0): 4344313937304e580a202020000000ff

(II) intel(0): 00353531323534333759420a2020000c

(II) intel(0): EDID vendor "NEC", prod id 26210

(II) intel(0): Using EDID range info for horizontal sync

(II) intel(0): Using EDID range info for vertical refresh

(II) intel(0): Printing DDC gathered Modelines:

(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)

(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)

(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)

(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)

(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)

(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)

(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)

(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)

(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)

(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)

(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)

(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)

(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)

(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)

(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)

(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)

(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)

(II) intel(0): EDID vendor "NEC", prod id 26210

(II) intel(0): Printing probed modes for output VGA

(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)

(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)

(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)

(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)

(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)

(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)

(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)

(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)

(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)

(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)

(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)

(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)

(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)

(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)

(II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)

(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)

(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)

(II) intel(0): Output VGA connected

(II) intel(0): Using exact sizes for initial modes

(II) intel(0): Output VGA using initial mode 1280x1024

(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

(II) intel(0): detected 2048 kB GTT.

(II) intel(0): detected 6140 kB stolen memory.

(==) intel(0): video overlay key set to 0x101fe

(**) intel(0): Display dimensions: (380, 300) mm

(**) intel(0): DPI set to (85, 86)

(II) Loading sub module "fb"

(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules/libfb.so

(II) Module fb: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

ABI class: X.Org ANSI C Emulation, version 0.4

(II) intel(0): Comparing regs from server start up to After PreInit

(II) UnloadModule: "vesa"

(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so

(II) UnloadModule: "fbdev"

(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so

(II) UnloadModule: "fbdevhw"

(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so

(==) Depth 24 pixmap format is 32 bpp

(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)

(EE) intel(0): /dev/agpgart is either not available, or no memory is available

for allocation.  Please enable agpgart

.(WW) intel(0): VideoRam reduced to 6136 KB (page aligned - was 6139 KB)

(WW) intel(0): DRI2: failed to open drm device

(**) intel(0): Framebuffer compression disabled

(**) intel(0): Tiling enabled

(**) intel(0): SwapBuffers wait enabled

(EE) intel(0): Failed to initialize kernel memory manager

(==) intel(0): VideoRam: 6136 KB

(II) intel(0): Attempting memory allocation with tiled buffers.

(EE) intel(0): AGP GART support is either not available or cannot be used.

Make sure your kernel has agpgart support or has

the agpgart module loaded.

(II) intel(0): Tiled allocation failed.

(II) intel(0): Attempting memory allocation with untiled buffers.

(EE) intel(0): AGP GART support is either not available or cannot be used.

Make sure your kernel has agpgart support or has

the agpgart module loaded.

(II) intel(0): Untiled allocation failed.

(EE) intel(0): Couldn't allocate video memory


Fatal server error:

AddScreen/ScreenInit failed for driver 0



Please consult the The X.Org Foundation support 

 at http://wiki.x.org

 for help. 

Please also check the log file at "/var/log/Xorg.0.log" for additional information.


 ddxSigGiveUp: Closing log


=========================================================$ lspci

00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)

00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)

00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)

00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02)

00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02)

00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)

00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)

00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02)

00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)

03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b2)

06:00.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10)




Hi!


 Can you attach your /var/log/Xorg.0.log file?

 What is your video board? Can you show the output of the lspci command?


Regards,

Thiago



2010/5/31 doom <doom28@xxxxxxx>


Config from here

http://lists.xensource.com/archives/html/xen-users/2010-03/msg00878.html

work and my PC boot until switch in GUI mode.

When start X display off and no signal, but server working and receive ssh connection.

How can I make GUI work ?




_______________________________________________

Xen-users mailing list

Xen-users@xxxxxxxxxxxxxxxxxxx

http://lists.xensource.com/xen-users





-- 

С уважением,

 doom                          mailto:doom28@xxxxxxx


-----Inline Attachment Follows-----


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users