I read this and I
gather I
need to be
running Xen 4.0 in order to run Ubuntu 10.04 as a pv domu... is that
correct? I am currently at 3.4.2 on a centos 5.4 dom0 but need to run
some ubuntu domu's very badly. Please advise!
--
Donny B.
On Monday, May 17, 2010 10:39 PM CDT, Boris Derzhavets <
bderzhavets@xxxxxxxxx>
wrote:
> > I tried to follow your steps (installing Lucid x86_64 PV domU
on a
> CentOS 54 x86_64 dom0, running xen 3.4.2 from gitco) ... but was
not
> successful. Something is still escaping me.
>
> Yes , you missing David's patch. Personally , i could back port it
only to Xen 4.0,
> even Xen 3.4.3 was not enough. Some other CSs from 4.0 are
required for consistency and you don't know which ones.
>
> You are at 3.4.2 !
>
> I believe gitco did Xen 4.0 rpms. Gitgo's 4.0 src.rpm has to
patched per David and rpms rebuilt. That 's in case you want "pygrub"
to be bootloader for DomU . It's comfortable, but not required.
>
> Boris.
>
> --- On Mon, 5/17/10, David Markey <
admin@xxxxxxxxxxx>
wrote:
>
> From: David Markey <
admin@xxxxxxxxxxx>
> Subject: Re: [Xen-users] Install ubunto domU
> To: "Nuno L. Ferreira" <
nunolf@xxxxxxxxx>
> Cc: "Boris Derzhavets" <
bderzhavets@xxxxxxxxx>,
"xen-users"
<
xen-users@xxxxxxxxxxxxxxxxxxx>
> Date: Monday, May 17, 2010, 6:54 PM
>
> You need
http://lists.xensource.com/archives/html/xen-devel/2010-04/msg00748.html
>
>
> On 17 May 2010 23:24, Nuno L. Ferreira <
nunolf@xxxxxxxxx> wrote:
>
> Dear *, Boris
>
>
>
> I tried to follow your steps (installing Lucid x86_64 PV domU on a
CentOS 54 x86_64 dom0, running xen 3.4.2 from gitco) ... but was not
successful. Something is still escaping me.
>
> Installation went just fine till the end after a "xm create -c
lucid.xen" (see below).
>
> After installation (without any modifications to what was
installed) I edited the xen config file (test.xen, see below) to boot
with pygrub instead. But I get the following error:
>
> Error: Boot loader didn't return any data!
>
>
>
> I checked that the new domU does not have /usr/bin/pygrub, and
this explains the error.
>
> So Boris, how did you boot your ubunto based domU after a netboot
installation?
>
> I did not tried yet the debootstrap method also suggested ...
first I want to know what I'm doing wrong here.
>
>
>
> I'm a bit lost on setting up an ubunto domU, first time getting
outside RedHat like OSes. So if there are some good working links to
blogs/tutorials on how to install ubunto domU's on RedHat like dom0's
I'll appreciate.
>
>
>
>
> Cheers,
>
> N.
>
>
>
> P.S. Steps taken :
>
>
>
> 1 - lvcreate -n domu.ubunto.lucid -L 4G vg1
>
> 2 - mkfs.ext3 /dev/vg1/domu.ubunto.lucid
>
> 3 - wget
http://archive.ubuntu.com/ubuntu/dists/lucid/main/installer-amd64/current/images/netboot/xen/vmlinuz
>
>
> 4 - wget
http://archive.ubuntu.com/ubuntu/dists/lucid/main/installer-amd64/current/images/netboot/xen/initrd.gz
>
>
> 5 - cat lucid.xen
>
> name = "lucid"
>
> memory = 1024
>
> disk = ['phy:/dev/vg1/domu.ubunto.lucid,xvda,w' ]
>
> vif = [ 'bridge=eth0' ]
>
> kernel = "/mnt/dom0/data/domu.setup/ubunto/lucid/vmlinuz"
>
> ramdisk = "/mnt/dom0/data/domu.setup/ubunto/lucid/initrd.gz"
>
> vcpus = 1
>
>
>
> on_crash = 'destroy'
>
>
>
> 6 - xm create -c lucid.xen
>
> ... installation goes just fine ...
>
> 7 - cat test.xen
>
> name = "test"
>
> memory = 512
>
> maxmem = 1024
>
> bootloader = '/usr/bin/pygrub'
>
> disk = ['phy:/dev/vg1/domu.spyder.root,xvda,w' ]
>
> vif = [ 'bridge=eth0' ]
>
> vcpus = 1
>
>
>
> on_reboot = 'restart'
>
> on_crash = 'restart'
>
>
>
> 8 - xm create -c test.xen
>
> Using config file "./test.xen".
>
> Error: Boot loader didn't return any data!
>
>
>
>
>
>
>
>
>
> Boris Derzhavets wrote:
>
>
> I was able to start installer :
>
>
>
> root@ServerLnx:/home/boris/ubuntu# wget
http://archive.ubuntu.com/ubuntu/dists/lucid/main/installer-amd64/current/images/netboot/xen/vmlinuz
>
>
> --2010-05-13 12:36:14--
http://archive.ubuntu.com/ubuntu/dists/lucid/main/installer-amd64/current/images/netboot/xen/vmlinuz
>
>
> Resolving archive.ubuntu.com... 91.189.92.167, 91.189.88.30,
91.189.88.31, ...
>
> Connecting to archive.ubuntu.com|91.189.92.167|:80... connected.
>
> HTTP request sent, awaiting response... 200 OK
>
> Length: 4037888 (3.9M) [text/plain]
>
> Saving to: `vmlinuz'
>
>
>
>
100%[========================================================================>]
4,037,888
101K/s in 27s
>
> 2010-05-13 12:36:41 (144 KB/s) - `vmlinuz' saved [4037888/4037888]
>
>
>
> root@ServerLnx:/home/boris/ubuntu# wget
http://archive.ubuntu.com/ubuntu/dists/lucid/main/installer-amd64/current/images/netboot/xen/initrd.gz
>
>
> --2010-05-13 12:37:02--
http://archive.ubuntu.com/ubuntu/dists/lucid/main/installer-amd64/current/images/netboot/xen/initrd.gz
>
>
> Resolving archive.ubuntu.com... 91.189.92.166, 91.189.92.167,
91.189.88.30, ...
>
> Connecting to archive.ubuntu.com|91.189.92.166|:80... connected.
>
> HTTP request sent, awaiting response... 200 OK
>
> Length: 9678415 (9.2M) [application/x-gzip]
>
> Saving to: `initrd.gz'
>
>
>
>
100%[========================================================================>]
9,678,415
200K/s in 60s
>
> 2010-05-13 12:38:03 (156 KB/s) - `initrd.gz' saved
[9678415/9678415]
>
>
>
> root@ServerLnx:/home/boris/ubuntu# cat ubuntu.cfg
>
> name="U10PV"
>
> memory=2048
>
> disk = ['phy:/dev/sdb5,xvda,w' ]
>
> vif = [ 'bridge=eth0' ]
>
> # vfb = [ 'type=vnc,vncunused=1']
>
> kernel = "/home/boris/ubuntu/vmlinuz"
>
> ramdisk = "/home/boris/ubuntu/initrd.gz"
>
> vcpus=2
>
>
>
>
>
>
>
> # xm create -c ubuntu.cfg
>
>
>
> and see several obvious disadvantages (vs HVM convertion) :
>
>
>
> 1. VFB doesn't work
>
> 2. After selecting local mirror "Installing base system" is
already running for 15 min
>
> at 2MB/sec ADSL connection.
>
>
>
> Boris.
>
>
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-users mailing list
>
Xen-users@xxxxxxxxxxxxxxxxxxx
>
http://lists.xensource.com/xen-users
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
Home