| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Re: [Xen-devel] Scrubbing free ram
On Fri, Apr 23, 2010 at 06:52:42AM +0000, ilish ilish wrote:
> Hi Pasi,
> Thank you very much for your concern about my issue. After sending email
> to xen-devel, I switch to Debian 5 to install Xen, I do not have any
> problems but I am still very curious about the problem. Since I installed
> Debian now, I just have this part of my grub.conf entry:
> title pv_ops dom0-test (2.6.29) with serial console
> root (hd0,2)
> kernel /boot/xen-4.0.0-rc6.gz dom0_mem=1024M loglvl=all
> guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1
> lapic=debug apic_verbosity=debug apic=debug iommu=off
> module /boot/vmlinuz-2.6.29-xen-r4 ro
> root=UUID=e173017f-7b9a-4111-acf7-b9f0d02a8936 console=hvc0
> earlyprintk=xen nomodeset! initcall_debug debug loglevel=10
> module /boot/initrd-2.6.29-xen-r4.img
> Could you please help me about my issue?
Please update to 4.0.0 final, or even 4.0.1-rc version..
many bugs fixed after 4.0.0-rc6.
> I also want to ask you something about Debian 5+Xen 4.0 . I booted with
> Xen in my Debian installed machine. However there is a problem about the
> eth0. Xen 4.0 did not recognize my eth0. I do not know what to do about
> this. Do you have any idea about this?
> Thank you again very much for your time and help.
>
Xen doesn't have drivers for hardware/nics. It's the Linux dom0 kernel that has
the NIC driver.
Does "lspci -v" list the nic (when booted to Xen dom0)?
Also please paste your dmesg.
Also is there a specific reason you're using 2.6.29-xen-r4 (xenlinux) kernel
instead of the pvops dom0 kernel?
-- Pasi
> Ilhan
> > Date: Fri, 23 Apr 2010 09:14:12 +0300
> > From: pasik@xxxxxx
> > To: ilishim@xxxxxxxxxxx
> > CC: xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: [Xen-users] Re: [Xen-devel] Scrubbing free ram
> >
> > On Thu, Apr 22, 2010 at 09:54:30PM +0000, ilish ilish wrote:
> > > Hi everyone,
> > >
> > > I am working on a project whose goal is evaluating the pe! rformance
> of the
> > > vTPM Manager. For this project I am using Xen 4.1, Kernel 2.6.31.13
> with
> > > Fedora11. I I finished all installation and configuration parts. Now I
> > > need to boot the system with Xen but while booting, it is freezing at
> the
> > > step "scrubbing free ram". What can be cause this problem and how can
> I
> > > figure it out? I really appreciate if you can help me.
> > >
> >
> > Please paste your grub.conf.
> >
> > Also please check this wiki page:
> > http://wiki.xensource.com/xenwiki/XenSerialConsole
> >
> > and:
> > http://wiki.xensource.com/xenwiki/XenParavirtOps
> >
> > -- Pasi
> >
> >
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home