[Xen-users] RE: XEN 4.0 + 2.6.31.13 - Panic on CPU 0

["Ian Tobin" <itobin@xxxxxxxxxxxxx>]

Hi,

Go into the bios and see if you can find ACPI HPET Table and enable it.

Fixed it for me

Cheers

Ian



-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Matej Zary
Sent: 20 April 2010 14:10
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: XEN 4.0 + 2.6.31.13 - Panic on CPU 0

Hello, 

finally worked out the serial console problem, and here are the logs:

Xen 4.0 compiled from soure with default pvops kernel2.6.31.13 on Debian Lenny.

XEN will panic with

 ****************************************
(XEN) Panic on CPU 0:
(XEN) IO-APIC + timer doesn't work!  Boot with apic=debug and send a report.  
Then try booting with the 'noapic'
option**************************************
 

when booting with suggested noapic XEN panics with (see attached logs) 


(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: 0000000000000014
(XEN) ****************************************

apic=debug gave same output like default it was not there

Any ideas?

Regards

Matej

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users