Well, it seems, problem is the IO ports Kouwell PCI card - 01:0a.0
Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev
01).
COM ports work in standard Lenny kernel like charm, but when I remove these
modules, they caese to work - so it seems they need special driver to work - so
I assume that's the reason they don't work during xen boot process (or I'm
wrong? :) ).
lsmod
parport_serial 11264 0
parport_pc 31016 1 parport_serial
parport 41776 1 parport_pc
Any ideas? (or advice on proven PCI card with COM ports that are usable for
monitoring xen boot process)?
Regards
Matej
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Matej Zary
Sent: Monday, April 19, 2010 4:57 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Serial console - Xen 4.0 - debugging pv_ops 2.6.31 dom0
kernel
Hello all,
I compiled from source Xen 4.0 with the default 2.6.31.13 pv_ops dom0 kernel on
barebone Debian Lenny installation. Problem is, this dom0 kernel won't boot.
First complaining about ioapic, so I tried with noioapci, still no luck (the
screen blackens during boot and computer reboots). :( So here comes serial
console. This PC is older shady Asrock nForce 430 board with AMD Athlon X2 1,9
Ghz CPU => no onboard serial port. Therefore I added PCI card with i/o ports.
dmesg | grep tty
[ 0.004000] console [tty0] enabled
[ 0.923873] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.924008] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.887891] 0000:01:0a.0: ttyS1 at I/O 0xec00 (irq = 18) is a 16550A
[ 7.887891] 0000:01:0a.0: ttyS2 at I/O 0xe480 (irq = 18) is a 16550A
According to http://wiki.xensource.com/xenwiki/XenSerialConsole I used usb->com
cable on my laptop and tried the link test with minicom on both sides -
chatting worked flawlessly (using /dev/ttyS1 on "server" side).
Problem is, I'm not able configure boot options for Xen to work with this
serial port. My grub menu.lst (one from many experiments):
title Xen 4.0, Linux kernel 2.6.31.13 with serial console
root (hd0,0)
kernel /boot/xen-4.0.gz dom0_mem=512M loglvl=all guest_loglvl=all
com2=115200, 8n1, 0xec00, 18 console=com2
module /boot/vmlinuz-2.6.31.13 root=/dev/sda1 ro console=hvc0
earlyprintk=xen nomodeset
module /boot/initrd.img-2.6.31.13
Tried many variations, but still no luck getting the xen boot process on my
serial connected console.
Any hints?
Many thanks.
Matej
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home