Re: [Xen-devel] Xen Dom U kernel

[listmail <listmail@xxxxxxxxxxxx>]

I don't have any issues using my dom0 kernel & initrd to boot pv domU,  
config has CONFIG_XEN_BLKDEV_FRONTEND=m as well.
However, thats when passing through file based images & LVM from the 
dom0 to the domU.  Is this more of an issue when LVM is implemented on 
the domU itself???  That's what I am seeing here.  Should he be adding a 
break=premount option to initrd and checking visibility of the LVM root 
from busybox?
Pasi Kärkkäinen wrote:
> On Mon, Apr 19, 2010 at 12:08:35PM -0700, kishore kumar wrote:
>   
> >    I included
> >    kernel = "/boot/vmlinuz-2.6.32.10"
> >    ramdisk = "/boot/initrd-2.6.32.10.img" (This is the same as my Dom 0.  As
> >    I am trying to boot the same Dom 0 as my Dom U without any changes)
> >
> >     
> You cannot use the dom0 initrd/ramdisk for domU!
>
> dom0 initrd contains drivers for the physical hardware, while in the domU initrd
> you need to have drivers for the _virtual_ hardware!
>
> In the log below root was not found because the drivers for the xen block 
> devices
> are not loaded.
>
> -- Pasi
>
>
>   
> >    disk = ['phy:sda2,sda2,w']
> >    root= "/dev/VolGroup01/LogVol00 ro"
> >
> >      I see my .config and I have
> >    CONFIG_XEN_BLKDEV_FRONTEND=m
> >    CONFIG_XEN_BLKDEV_BACKEND=y
> >    CONFIG_XEN_BACKEND=y
> >
> >    Below is the output pasted.  Any help please on what is going wrong here?
> >
> >    XENBUS: Device with no driver: device/vbd/2050
> >
> >    XENBUS: Device with no driver: device/vif/0
> >
> >    XENBUS: Device with no driver: device/console/0
> >
> >    Magic number: 1:252:3141
> >
> >    drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> >
> >    Initalizing network drop monitor service
> >
> >    Freeing unused kernel memory: 3392k freed
> >
> >    Write protecting the kernel read-only data: 6912k
> >
> >    Red Hat nash version 5.1.19.6 starting
> >
> >    Mounting proc filesystem
> >
> >    Mounting sysfs filesystem
> >
> >    Creating /dev
> >
> >    Creating initial device nodes
> >
> >    Setting up hotplug.
> >
> >    Creating block device nodes.
> >
> >    Loading ehci-hcd.ko module
> >
> >    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> >
> >    insmod used greatest stack depth: 5712 bytes left
> >
> >    Loading ssb.ko module
> >
> >    Loading ohci-hcd.ko module
> >
> >    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> >
> >    Loading uhci-hcd.ko module
> >
> >    uhci_hcd: USB Universal Host Controller Interface driver
> >
> >    Scanning and configuring dmraid supported devices
> >
> >    Scanning logical volumes
> >
> >    Reading all physical volumes. This may take a while...
> >
> >    lvm used greatest stack depth: 5328 bytes left
> >
> >    Activating logical volumes
> >
> >    Volume group "VolGroup01" not found
> >
> >    Trying to resume from /dev/VolGroup01/LogVol01
> >
> >    Unable to access resume device (/dev/VolGroup01/LogVol01)
> >
> >    Creating root device.
> >
> >    Mounting root filesystem.
> >
> >    mount: could not find filesystem '/dev/root'
> >
> >    Setting up other filesystems.
> >
> >    Setting up new root fs
> >
> >    setuproot: moving /dev failed: No such file or directory
> >
> >    no fstab.sys, mounting internal defaults
> >
> >    setuproot: error mounting /proc: No such file or directory
> >
> >    setuproot: error mounting /sys: No such file or directory
> >
> >    Switching to new root and running init.
> >
> >    unmounting old /dev
> >
> >    unmounting old /proc
> >
> >    unmounting old /sys
> >
> >    switchroot: mount failed: No such file or directory
> >
> >    init used greatest stack depth: 4888 bytes left
> >
> >    Kernel panic - not syncing: Attempted to kill init!
> >
> >    Pid: 1, comm: init Not tainted 2.6.32.10 #2
> >
> >    Call Trace:
> >
> >    [<ffffffff8105b747>] panic+0xa5/0x167
> >
> >    [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
> >
> >    [<ffffffff81475d48>] ? _write_unlock_irq+0x30/0x3c
> >
> >    [<ffffffff8108c9f4>] ? trace_hardirqs_on_caller+0x110/0x134
> >
> >    [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
> >
> >    [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
> >
> >    [<ffffffff8105efa7>] do_exit+0x7e/0x701
> >
> >    [<ffffffff8105f6c6>] sys_exit_group+0x0/0x1b
> >
> >    [<ffffffff8105f6dd>] sys_exit_group+0x17/0x1b
> >
> >    [<ffffffff81012d72>] system_call_fastpath+0x16/0x1b
> >
> >    On Sat, Apr 17, 2010 at 5:22 AM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
> >
> >      On Fri, Apr 16, 2010 at 03:24:53PM -0700, kishore kumar wrote:
> >      >    I am using my Dom 0 kernel to boot as my Dom U.
> >      >    I edited /etc/xen/xmexample1 file and modified only below lines
> >      >
> >      >    kernel="/boot/vmlinux-2.6.32.10"
> >      >    memory=512
> >      >    vcpus=5
> >      >    root = "/dev/VolGroup01/LogVol00 ro"
> >      >    Below is the output I pasted after freezing.  Not sure what is
> >      wrong.  Can
> >      >    you please help me here??
> >      >    I doubt if I have provided the correct root option?
> >      >
> >
> >      I bet that kernel has xen block frontend driver as a module?
> >
> >      You don't seem to have ramdisk/initrd image,
> >      so you simply don't have the driver loaded at all
> >      to access the root disk in the guest.
> >
> >      You must create an initrd image that loads the driver module in the
> >      guest.
> >      >
> >      >    VFS: Cannot open root device "VolGroup01/LogVol00" or
> >      unknown-block(0,0)
> >      >
> >      >    Please append a correct "root=" boot option; here are the available
> >      >    partitions:
> >      >
> >      >    Kernel panic - not syncing: VFS: Unable to mount root fs on
> >      >    unknown-block(0,0)
> >      >
> >
> >      Root was not found - this is usually because you don't have the xen
> >      blockdev frontend driver loaded.
> >      -- Pasi
> >
> > References
> >
> >    Visible links
> >    1. mailto:pasik@xxxxxx
> >     
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>   
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel