|   | 
      | 
  
  
      | 
      | 
  
 
     | 
    | 
  
  
     | 
    | 
  
  
    |   | 
      | 
  
  
    | 
         
xen-users
RE: [Xen-users] xend-config.sxp setting question & vlans
 
> Date: Tue, 9 Mar 2010 12:13:08 +0700 > Subject: Re: [Xen-users] xend-config.sxp setting question & vlans > From: fajar@xxxxxxxxx > To: viaum@xxxxxxxxxxxxxxx > CC: xen-users@xxxxxxxxxxxxxxxxxxx >  > On Mon, Mar 8, 2010 at 11:49 PM, Mike Viau <viaum@xxxxxxxxxxxxxxx> wrote: > > Hello, > > > > I have a question for the xenners using 1st method of having VMs using VLAN > > interfaces with XEN. [http://wiki.xensource.com/xenwiki/XenNetworking] > > > > I've setup my /etc/network/interfaces file with bridge enteries like in the > > example: > > > > iface xen-br293 inet manual > >     up vconfig add eth0 293 > >     up /etc/xen/scripts/network start netdev=eth0.293 bridge=xen-br293 > > antispoof=no >  > Why? >  > IMHO you should use only one, not both. So either: > - have xen's networking script create the bridges, or > - create the bridges manually, and comment-out xen's networking script > on xend-config.sxp. This is what I prefer to use on complex setup. > 
  I am comfortable with creating the bridges manually and commenting-out xen's networking script on xend-config.sxp as Pasi pointed out in another thread.
  Could someone provide a working example of debian /etc/network/interface file where a vlan is bridged for use with xen DomUs?
  To be honest, I don't think the 1st method of having VMs using VLAN interfaces with XEN works with with my Debain Lenny (and possibly other) setup. I was just trying to follow the wiki as it was written.
  However I quickly discovered that the above iface xen-br293 inet manual entry does not work, because when one tries to bring up xen-br293 one gets:
  xen-br293: ERROR while getting interface flags: No such device
  I believe this may be do to the fact that the xen-br# devices are not known by the udev system and thus the iface entries are just ignored. Regardless I think the wiki should demonstrate how to use xen's networking script create the bridges, or how to create the bridges manually (in /etc/network/interface or other method(s)) while comment-out xen's networking script on xend-config.sxp like Fajar suggested.
 
 
  > --  > Fajar >  > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users  		 	   		  
  Stay in touch. Get Messenger on your phone now.
 |  
 _______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users 
 |   
 
 | 
    | 
  
  
    |   | 
    |