On Tue, Mar 02, 2010 at 11:56:39AM -0800, kishore kumar wrote:
> Hi Boris,
>
> I successfully compiled and installed linux 2.6.32.9.
>
> I modified the grub.conf to boot with xen.
>
> After reboot, the system shows some xen boot messages and goes to black
> screen. Nothing comes on the screen.
>
> What could be wrong here?
>
Do you have "nomodeset" parameter for the dom0 kernel? I think that's required
still..
-- Pasi
> Thanks
> BK
>
>
> On Mon, Mar 1, 2010 at 5:12 PM, Boris Derzhavets
> <[1]bderzhavets@xxxxxxxxx> wrote:
>
> Quote:-
>
> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> Git Repository to support Xen 3.4.2 Dom0.
> # git clone git://[2]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> linux-2.6-xen (THIS WENT THROUGH SUCCESSFULLY)
> # cd linux-2.6-xen
>
> end Quote.
>
> Add commands:-
>
> # git checkout origigin/xen/stable -b xen/stable
> # git pull
>
> Build with attached config :-
>
> # make -j2 (or 4 -number of cores your CPU)
> # make modules_install install
>
> Create initrd-2.6.32.9.img for your OS.
>
> Boris.
>
> --- On Mon, 3/1/10, kishore kumar <[3]bodkekumar@xxxxxxxxx> wrote:
>
> From: kishore kumar <[4]bodkekumar@xxxxxxxxx>
> Subject: Re: [Xen-users] xen Installation through YUM
> To: "Boris Derzhavets" <[5]bderzhavets@xxxxxxxxx>
> Cc: "Pasi Kärkkäinen" <[6]pasik@xxxxxx>, [7]xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Monday, March 1, 2010, 7:52 PM
>
> Hi All,
>
> To follow up this, after Installing Xen Hypervisor 3.4.2 successfully, I
> downloaded
> Linux 2.6.18 with Xen 3.4.x support source tarball, updated for Xen 3.4.2
> from
> [8]xen.org website and compiled and installed.
>
> Later I changed my grub.conf file to boot from Xen.
>
> #######################
> root (hd0,0)
> kernel /xen-3.4.2.gz
> module /vmlinuz-2.6.18 ro root=dev/mapper/VolGroup-lv_root LANG=en_US.UTF-8
> SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
> module /initrd-2.6.18.8.img
> #######################
>
> After I reboot, I get the following messages.
>
> ################
>
> Xenopf Intel processor model 44 or P6 family is not supported.
> Initialization failed.
>
> LOADING DOMAIN 0
> Cannot load bzImage v2.04. v2.08 is required.
>
> Panic on CPU 0
> Could not set up DOM 0 Guest OS
> Reboot in 5 sec
>
> ###############
> What is wrong happening here?
>
> THanks
> BK
> On Mon, Mar 1, 2010 at 12:14 PM, kishore kumar <[9]bodkekumar@xxxxxxxxx>
> wrote:
>
> Hi Boris,
>
> I was following your steps and got stuck in the middle. Here is what I
> did...
>
> Step 1 was sucessfull and Xen Hypervisor 3.4.2 is installed successfully.
>
> Now while doing the step 2
>
> STEP 2:
>
> Install Libvirt
> # yum install libvirt libvirt-python python-virtinst \
> virt-manager virt-viewer (THIS WENT THROUGH SUCCESSFULLY)
>
> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> Git Repository to support Xen 3.4.2 Dom0.
> # git clone
> git://[10]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> linux-2.6-xen (THIS WENT THROUGH SUCCESSFULLY)
> # cd linux-2.6-xen
> # make menuconfig ( setup Xen Dom0 support) (HOW TO SET UP THIS ?)
> # make -j(x)(number_of_kernels) (I DID MAKE -J, WHAT SHOULD I GIVE HERE
> IN PLACE OF
> x. ??
>
> BUT GAVE ME ERRORS. I DONT KNOW WHAT WRONG I AM DOING HERE. CAN YOU
> PLEASE HELP ME
> OUT IN THIS?)
>
> I HAVE ATTACHED THE LOG FILE FOR YOUR REFERENCE. I AM USING FEDORA 12
> MACHINE.
>
> Thanks
> BK
>
> On Sat, Feb 27, 2010 at 4:27 AM, Boris Derzhavets
> <[11]bderzhavets@xxxxxxxxx> wrote:
>
> Nothing went wrong.
> Now build pvops kernel.
> Instructions bellow.
> Reading PVOPS WIKI would help as well
>
> Boris.
>
> --- On Fri, 2/26/10, kishore kumar <[12]bodkekumar@xxxxxxxxx> wrote:
>
> From: kishore kumar <[13]bodkekumar@xxxxxxxxx>
> Subject: Re: [Xen-users] xen Installation through YUM
> To: "Pasi Kärkkäinen" <[14]pasik@xxxxxx>
> Cc: "Boris Derzhavets" <[15]bderzhavets@xxxxxxxxx>,
> [16]xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Friday, February 26, 2010, 9:41 PM
>
> Now I am able to do yum install kernel-xen xen.
>
> I can see the xen Images sitting in /boot directory. Its
> xen-3.4.2.gz and xen.gz.
>
> Is this what to be expected ?
>
> I changed the grub.conf file to boot with Xen as below
>
> title Fedora (2.6.31.9-174.fc12.x86_64)
> root(hd0,0)
> kernel /xen-3.4.2.gz
>
> My question is I dont see vmlinuz-2.6-xen0 in /boot directory.
>
> Do I need to add this line module /boot/vmlinuz-2.6-xen0 ??? But I
> dont see this
> file .When we do yum to insall xen, will it also install
> vmlinuz-2.6-xen0 also ??
>
> Any idea what went wrong here??
>
> thanks
> BK
>
>
> On Fri, Feb 26, 2010 at 2:28 PM, Pasi Kärkkäinen <[17]pasik@xxxxxx>
> wrote:
>
> On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar wrote:
> > I have already set gpgcheck=0 in /etc/yum.conf file.
> >
> > I did not clearly understood on what you said in the next
> line.........
> >
> > to install unsigned rpms supposed to be built latter.
> > Activate rpmbuild on F12:-
> >
> > # yum install transfig texi2html libaio-devel dev86 \
> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
> > what should I do can you please clarify me on the above
> statements you
> > said???
> >
> > I followed your next step and downloaded
> xen-3.4.2-2.fc13.src.rpm from
> > internet and started doing the steps mentioned by you. but at
> the very
> > step I get the messages saying
> >
> > After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> > warning: user mockbuild does not exist - using root
> > warning: group mockbuild does not exist - using root
> >
> > Any idea what went wrong again??
> >
>
> Nothing went wrong, those are just warnings.
>
> -- Pasi
> > THanks
> > bk
> >
> > On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets
> > <[1][18]bderzhavets@xxxxxxxxx> wrote:
> >
> > Set in /etc/yum.conf set gpgcheck=0 ( temporarily )
> > to install unsigned rpms supposed to be built latter.
> > Activate rpmbuild on F12:-
> >
> > # yum install transfig texi2html libaio-devel dev86 \
> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
> >
> > 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm. Download from
> Net
> > xen-3.4.2-2.fc13.src.rpm. Now :-
> >
> > # rpm -iv xen-3.4.2-2.fc13.src.rpm
> > # cd
> > # cd rpmbuild/SPEC
> > # rpmbuild -bb ./xen.spec
> > # cd ../RPMS/x86_64
> > yum install xen-3.4.2-2.fc12.x86_64.rpm \
> > xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \
> > xen-devel-3.4.2-2.fc12.x86_64.rpm \
> > xen-doc-3.4.2-2.fc12.x86_64.rpm \
> > xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \
> > xen-libs-3.4.-2.fc12.x86_64.rpm \
> > xen-runtime-3.4.2-2.fc12.x86_64.rpm
> >
> > Xen Hypervisor 3.4.2 installed
> >
> > 2. Install Libvirt
> >
> > # yum install libvirt libvirt-python python-virtinst \
> > virt-manager virt-viewer
> >
> > PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> > Git Repository to support Xen 3.4.2 Dom0.
> >
> > # git clone
> git://[2][19]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > linux-2.6-xen
> > # cd linux-2.6-xen
> > # make menuconfig ( setup Xen Dom0 support)
> > # make -j(x)(number_of_kernels)
> > # make modules_install install
> >
> > You may also want to build 2.6.32.9 pvops
> >
> > # git checkout origin/xen/stable -b xen/stable
> >
> > I just switched from xen/master ( default 2.6.31.6 ) to
> xen/stable (the most
> > recent supposed to become LTS - 2.6.32.9)
> >
> > Boris.
> >
> > --- On Fri, 2/26/10, Pasi Kärkkäinen <[3][20]pasik@xxxxxx> wrote:
> >
> > From: Pasi Kärkkäinen <[4][21]pasik@xxxxxx>
> > Subject: Re: [Xen-users] xen Installation through YUM
> > To: "kishore kumar" <[5][22]bodkekumar@xxxxxxxxx>
> > Cc: [6][23]xen-users@xxxxxxxxxxxxxxxxxxx
> > Date: Friday, February 26, 2010, 4:50 AM
> >
> > On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar wrote:
> > > HI,
> > >
> > > I am trying to install xen through yum. Here is what I did.
> > >
> > >
> > > [root@localhost Kishore]# yum install kernel-xen xen
> > >
> > > Setting up Install Process
> > >
> > > Resolving Dependencies
> > >
> > > --> Running transaction check
> > >
> > > ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set to be
> installed
> > >
> > > --> Processing Dependency: kernel-firmware >=
> 2.6.31.9-174.fc12 for
> > > package: kernel-2.6.31.9-174.fc12.x86_64
> > >
> > > ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be updated
> > >
> > > --> Processing Dependency: xen-runtime = 3.4.2-1.fc12 for
> package:
> > > xen-3.4.2-1.fc12.x86_64
> > >
> > > --> Processing Dependency: PyXML for package:
> xen-3.4.2-1.fc12.x86_64
> > >
> > > --> Running transaction check
> > >
> > > ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to be updated
> > >
> > > ---> Package kernel-firmware.noarch 0:2.6.31.9-174.fc12
> set to be
> updated
> > >
> > > ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set to be
> updated
> > >
> > > --> Processing Dependency: xen-libs = 3.4.2-1.fc12 for
> package:
> > > xen-runtime-3.4.2-1.fc12.x86_64
> > >
> > > --> Processing Dependency: xen-hypervisor-abi = 3.4 for
> package:
> > > xen-runtime-3.4.2-1.fc12.x86_64
> > >
> > > --> Running transaction check
> > >
> > > ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12 set to
> be updated
> > >
> > > ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to be
> updated
> > >
> > > --> Finished Dependency Resolution
> > >
> > > Dependencies Resolved
> > >
> > >
> >
>
> ================================================================================
> > >
> > > Package Arch Version Repository Size
> > >
> > >
> >
>
> ================================================================================
> > >
> > > Installing:
> > >
> > > kernel x86_64 2.6.31.9-174.fc12 updates-released 20 M
> > >
> > > xen x86_64 3.4.2-1.fc12 updates-released 898 k
> > >
> > > Installing for dependencies:
> > >
> > > PyXML x86_64 0.8.4-17.fc12 updates-released 906 k
> > >
> > > xen-hypervisor x86_64 3.4.2-1.fc12 updates-released 2.9 M
> > >
> > > xen-runtime x86_64 3.4.2-1.fc12 updates-released 4.0 M
> > >
> > > Updating for dependencies:
> > >
> > > kernel-firmware noarch 2.6.31.9-174.fc12 updates-released
> 906 k
> > >
> > > xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k
> > >
> > > Transaction Summary
> > >
> > >
> >
>
> ================================================================================
> > >
> > > Install 5 Package(s)
> > >
> > > Upgrade 2 Package(s)
> > >
> > > Total download size: 29 M
> > >
> > > Is this ok [y/N]: y
> > >
> > > Downloading Packages:
> > >
> > > (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB 00:00
> > >
> > > (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB 00:02
> > >
> > > (3/7): kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906
> kB 00:00
> > >
> > > (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00
> > >
> > > (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm | 2.9 MB
> 00:00
> > >
> > > (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB 00:00
> > >
> > > (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0 MB 00:00
> > >
> > >
> >
>
> --------------------------------------------------------------------------------
> > >
> > > Total 6.7 MB/s | 29 MB 00:04
> > >
> > > warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256
> signature: NOKEY, key
> ID
> > > 57bbccba
> > >
> > > Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm is not
> installed
> > >
> > >
> > >
> > > Did Xen got installed with this?
> > >
> > > Will the grub.conf be automatically updtaed after I run
> this command.
> > > (But I dont see my grub.conf being updated)
> > >
> > > Any Idea what went wrong here.
> > >
> >
> > Fedora 12 doesn't include Xen dom0 capable kernel, see:
> > [7][24]http://fedoraproject.org/wiki/Features/XenPvopsDom0
> >
> > You need to get one of the 'testing' rpms, or compile it
> yourself.
> >
> > -- Pasi
> >
> > _______________________________________________
> > Xen-users mailing list
> > [8][25]Xen-users@xxxxxxxxxxxxxxxxxxx
> > [9][26]http://lists.xensource.com/xen-users
> >
> > References
> >
> > Visible links
> > 1. mailto:[27]bderzhavets@xxxxxxxxx
> > 2.
> [28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> > 3. mailto:[29]pasik@xxxxxx
> > 4. mailto:[30]pasik@xxxxxx
> > 5. mailto:[31]bodkekumar@xxxxxxxxx
> > 6. mailto:[32]xen-users@xxxxxxxxxxxxxxxxxxx
> > 7. [33]http://fedoraproject.org/wiki/Features/XenPvopsDom0
> > 8. [34]http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> > 9. [35]http://lists.xensource.com/xen-users
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-users mailing list
> [36]Xen-users@xxxxxxxxxxxxxxxxxxx
> [37]http://lists.xensource.com/xen-users
>
> References
>
> Visible links
> 1. mailto:bderzhavets@xxxxxxxxx
> 2. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 3. mailto:bodkekumar@xxxxxxxxx
> 4. mailto:bodkekumar@xxxxxxxxx
> 5. mailto:bderzhavets@xxxxxxxxx
> 6. mailto:pasik@xxxxxx
> 7. mailto:xen-users@xxxxxxxxxxxxxxxxxxx
> 8. http://xen.org/
> 9. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 10. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 11. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 12. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 13. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 14. http://mc/compose?to=pasik@xxxxxx
> 15. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 16. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 17. http://mc/compose?to=pasik@xxxxxx
> 18. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 19. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 20. http://mc/compose?to=pasik@xxxxxx
> 21. http://mc/compose?to=pasik@xxxxxx
> 22. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 23. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 24. http://fedoraproject.org/wiki/Features/XenPvopsDom0
> 25. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 26. http://lists.xensource.com/xen-users
> 27. http://mc/compose?to=bderzhavets@xxxxxxxxx
> 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 29. http://mc/compose?to=pasik@xxxxxx
> 30. http://mc/compose?to=pasik@xxxxxx
> 31. http://mc/compose?to=bodkekumar@xxxxxxxxx
> 32. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> 33. http://fedoraproject.org/wiki/Features/XenPvopsDom0
> 34. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 35. http://lists.xensource.com/xen-users
> 36. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 37. http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home