Unsubscribe.
On 3/2/10, xen-users-request@xxxxxxxxxxxxxxxxxxx
<xen-users-request@xxxxxxxxxxxxxxxxxxx> wrote:
> Send Xen-users mailing list submissions to
> xen-users@xxxxxxxxxxxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.xensource.com/mailman/listinfo/xen-users
> or, via email, send a message with subject or body 'help' to
> xen-users-request@xxxxxxxxxxxxxxxxxxx
>
> You can reach the person managing the list at
> xen-users-owner@xxxxxxxxxxxxxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Xen-users digest..."
>
>
> Today's Topics:
>
> 1. Re: xen Installation through YUM (Pasi K?rkk?inen)
> 2. Re: XCP Hanging at Setting Hostname (Pasi K?rkk?inen)
> 3. Re: xen/next & pvm pci passthrough? (Pasi K?rkk?inen)
> 4. Re: XCP Hanging at Setting Hostname (Pasi K?rkk?inen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 2 Mar 2010 08:59:34 +0200
> From: Pasi K?rkk?inen <pasik@xxxxxx>
> Subject: Re: [Xen-users] xen Installation through YUM
> To: kishore kumar <bodkekumar@xxxxxxxxx>
> Cc: Boris Derzhavets <bderzhavets@xxxxxxxxx>,
> xen-users@xxxxxxxxxxxxxxxxxxx
> Message-ID: <20100302065934.GX2761@xxxxxxxxxxx>
> Content-Type: text/plain; charset=iso-8859-1
>
> On Mon, Mar 01, 2010 at 04:52:57PM -0800, kishore kumar wrote:
>> Hi All,
>>
>> To follow up this, after Installing Xen Hypervisor 3.4.2 successfully,
>> I
>> downloaded Linux 2.6.18 with Xen 3.4.x support source tarball, updated
>> for
>> Xen 3.4.2 from [1]xen.org website and compiled and installed.
>>
>> Later I changed my grub.conf file to boot from Xen.
>>
>> #######################
>> root (hd0,0)
>> kernel /xen-3.4.2.gz
>> module /vmlinuz-2.6.18 ro root=dev/mapper/VolGroup-lv_root
>> LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us
>> rhgb quiet
>> module /initrd-2.6.18.8.img
>> #######################
>>
>> After I reboot, I get the following messages.
>>
>> ################
>>
>> Xenopf Intel processor model 44 or P6 family is not supported.
>> Initialization failed.
>>
>> LOADING DOMAIN 0
>> Cannot load bzImage v2.04. v2.08 is required.
>>
>> Panic on CPU 0
>> Could not set up DOM 0 Guest OS
>> Reboot in 5 sec
>>
>> ###############
>> What is wrong happening here?
>>
>
> I guess with linux-2.6.18-xen you should be using just the zImage,
> not bzImage?
>
> -- Pasi
>
>> THanks
>> BK
>> On Mon, Mar 1, 2010 at 12:14 PM, kishore kumar
>> <[2]bodkekumar@xxxxxxxxx>
>> wrote:
>>
>> Hi Boris,
>>
>> I was following your steps and got stuck in the middle. Here is what
>> I
>> did...
>>
>> Step 1 was sucessfull and Xen Hypervisor 3.4.2 is installed
>> successfully.
>>
>> Now while doing the step 2
>>
>> STEP 2:
>>
>> Install Libvirt
>> # yum install libvirt libvirt-python python-virtinst \
>> virt-manager virt-viewer (THIS WENT THROUGH SUCCESSFULLY)
>>
>> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
>> Git Repository to support Xen 3.4.2 Dom0.
>> # git clone
>> git://[3]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> linux-2.6-xen (THIS WENT THROUGH SUCCESSFULLY)
>> # cd linux-2.6-xen
>> # make menuconfig ( setup Xen Dom0 support) (HOW TO SET UP THIS ?)
>> # make -j(x)(number_of_kernels) (I DID MAKE -J, WHAT SHOULD I GIVE
>> HERE
>> IN PLACE OF x. ??
>>
>> BUT GAVE ME ERRORS. I DONT KNOW WHAT WRONG I AM DOING HERE. CAN
>> YOU
>> PLEASE HELP ME OUT IN THIS?)
>>
>> I HAVE ATTACHED THE LOG FILE FOR YOUR REFERENCE. I AM USING FEDORA
>> 12
>> MACHINE.
>>
>> Thanks
>> BK
>>
>> On Sat, Feb 27, 2010 at 4:27 AM, Boris Derzhavets
>> <[4]bderzhavets@xxxxxxxxx> wrote:
>>
>> Nothing went wrong.
>> Now build pvops kernel.
>> Instructions bellow.
>> Reading PVOPS WIKI would help as well
>>
>> Boris.
>>
>> --- On Fri, 2/26/10, kishore kumar <[5]bodkekumar@xxxxxxxxx> wrote:
>>
>> From: kishore kumar <[6]bodkekumar@xxxxxxxxx>
>> Subject: Re: [Xen-users] xen Installation through YUM
>> To: "Pasi Kärkkäinen" <[7]pasik@xxxxxx>
>> Cc: "Boris Derzhavets" <[8]bderzhavets@xxxxxxxxx>,
>> [9]xen-users@xxxxxxxxxxxxxxxxxxx
>> Date: Friday, February 26, 2010, 9:41 PM
>>
>> Now I am able to do yum install kernel-xen xen.
>>
>> I can see the xen Images sitting in /boot directory. Its xen-3.4.2.gz
>> and xen.gz.
>>
>> Is this what to be expected ?
>>
>> I changed the grub.conf file to boot with Xen as below
>>
>> title Fedora (2.6.31.9-174.fc12.x86_64)
>> root(hd0,0)
>> kernel /xen-3.4.2.gz
>>
>> My question is I dont see vmlinuz-2.6-xen0 in /boot directory.
>>
>> Do I need to add this line module /boot/vmlinuz-2.6-xen0 ??? But I dont
>> see this
>> file .When we do yum to insall xen, will it also install
>> vmlinuz-2.6-xen0 also ??
>>
>> Any idea what went wrong here??
>>
>> thanks
>> BK
>>
>>
>> On Fri, Feb 26, 2010 at 2:28 PM, Pasi Kärkkäinen <[10]pasik@xxxxxx>
>> wrote:
>>
>> On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar wrote:
>> > I have already set gpgcheck=0 in /etc/yum.conf file.
>> >
>> > I did not clearly understood on what you said in the next
>> line.........
>> >
>> > to install unsigned rpms supposed to be built latter.
>> > Activate rpmbuild on F12:-
>> >
>> > # yum install transfig texi2html libaio-devel dev86 \
>> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
>> > what should I do can you please clarify me on the above
>> statements you
>> > said???
>> >
>> > I followed your next step and downloaded xen-3.4.2-2.fc13.src.rpm
>> from
>> > internet and started doing the steps mentioned by you. but at
>> the very
>> > step I get the messages saying
>> >
>> > After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> > warning: user mockbuild does not exist - using root
>> > warning: group mockbuild does not exist - using root
>> >
>> > Any idea what went wrong again??
>> >
>>
>> Nothing went wrong, those are just warnings.
>>
>> -- Pasi
>> > THanks
>> > bk
>> >
>> > On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets
>> > <[1][11]bderzhavets@xxxxxxxxx> wrote:
>> >
>> > Set in /etc/yum.conf set gpgcheck=0 ( temporarily )
>> > to install unsigned rpms supposed to be built latter.
>> > Activate rpmbuild on F12:-
>> >
>> > # yum install transfig texi2html libaio-devel dev86 \
>> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
>> >
>> > 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm. Download from Net
>> > xen-3.4.2-2.fc13.src.rpm. Now :-
>> >
>> > # rpm -iv xen-3.4.2-2.fc13.src.rpm
>> > # cd
>> > # cd rpmbuild/SPEC
>> > # rpmbuild -bb ./xen.spec
>> > # cd ../RPMS/x86_64
>> > yum install xen-3.4.2-2.fc12.x86_64.rpm \
>> > xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \
>> > xen-devel-3.4.2-2.fc12.x86_64.rpm \
>> > xen-doc-3.4.2-2.fc12.x86_64.rpm \
>> > xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \
>> > xen-libs-3.4.-2.fc12.x86_64.rpm \
>> > xen-runtime-3.4.2-2.fc12.x86_64.rpm
>> >
>> > Xen Hypervisor 3.4.2 installed
>> >
>> > 2. Install Libvirt
>> >
>> > # yum install libvirt libvirt-python python-virtinst \
>> > virt-manager virt-viewer
>> >
>> > PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
>> > Git Repository to support Xen 3.4.2 Dom0.
>> >
>> > # git clone
>> git://[2][12]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> > linux-2.6-xen
>> > # cd linux-2.6-xen
>> > # make menuconfig ( setup Xen Dom0 support)
>> > # make -j(x)(number_of_kernels)
>> > # make modules_install install
>> >
>> > You may also want to build 2.6.32.9 pvops
>> >
>> > # git checkout origin/xen/stable -b xen/stable
>> >
>> > I just switched from xen/master ( default 2.6.31.6 ) to xen/stable
>> (the most
>> > recent supposed to become LTS - 2.6.32.9)
>> >
>> > Boris.
>> >
>> > --- On Fri, 2/26/10, Pasi Kärkkäinen <[3][13]pasik@xxxxxx> wrote:
>> >
>> > From: Pasi Kärkkäinen <[4][14]pasik@xxxxxx>
>> > Subject: Re: [Xen-users] xen Installation through YUM
>> > To: "kishore kumar" <[5][15]bodkekumar@xxxxxxxxx>
>> > Cc: [6][16]xen-users@xxxxxxxxxxxxxxxxxxx
>> > Date: Friday, February 26, 2010, 4:50 AM
>> >
>> > On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar wrote:
>> > > HI,
>> > >
>> > > I am trying to install xen through yum. Here is what I did.
>> > >
>> > >
>> > > [root@localhost Kishore]# yum install kernel-xen xen
>> > >
>> > > Setting up Install Process
>> > >
>> > > Resolving Dependencies
>> > >
>> > > --> Running transaction check
>> > >
>> > > ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set to be
>> installed
>> > >
>> > > --> Processing Dependency: kernel-firmware >=
>> 2.6.31.9-174.fc12 for
>> > > package: kernel-2.6.31.9-174.fc12.x86_64
>> > >
>> > > ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be updated
>> > >
>> > > --> Processing Dependency: xen-runtime = 3.4.2-1.fc12 for
>> package:
>> > > xen-3.4.2-1.fc12.x86_64
>> > >
>> > > --> Processing Dependency: PyXML for package:
>> xen-3.4.2-1.fc12.x86_64
>> > >
>> > > --> Running transaction check
>> > >
>> > > ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to be updated
>> > >
>> > > ---> Package kernel-firmware.noarch 0:2.6.31.9-174.fc12 set
>> to be
>> updated
>> > >
>> > > ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set to be
>> updated
>> > >
>> > > --> Processing Dependency: xen-libs = 3.4.2-1.fc12 for
>> package:
>> > > xen-runtime-3.4.2-1.fc12.x86_64
>> > >
>> > > --> Processing Dependency: xen-hypervisor-abi = 3.4 for
>> package:
>> > > xen-runtime-3.4.2-1.fc12.x86_64
>> > >
>> > > --> Running transaction check
>> > >
>> > > ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12 set to be
>> updated
>> > >
>> > > ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to be updated
>> > >
>> > > --> Finished Dependency Resolution
>> > >
>> > > Dependencies Resolved
>> > >
>> > >
>> >
>>
>> ================================================================================
>> > >
>> > > Package Arch Version Repository Size
>> > >
>> > >
>> >
>>
>> ================================================================================
>> > >
>> > > Installing:
>> > >
>> > > kernel x86_64 2.6.31.9-174.fc12 updates-released 20 M
>> > >
>> > > xen x86_64 3.4.2-1.fc12 updates-released 898 k
>> > >
>> > > Installing for dependencies:
>> > >
>> > > PyXML x86_64 0.8.4-17.fc12 updates-released 906 k
>> > >
>> > > xen-hypervisor x86_64 3.4.2-1.fc12 updates-released 2.9 M
>> > >
>> > > xen-runtime x86_64 3.4.2-1.fc12 updates-released 4.0 M
>> > >
>> > > Updating for dependencies:
>> > >
>> > > kernel-firmware noarch 2.6.31.9-174.fc12 updates-released 906
>> k
>> > >
>> > > xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k
>> > >
>> > > Transaction Summary
>> > >
>> > >
>> >
>>
>> ================================================================================
>> > >
>> > > Install 5 Package(s)
>> > >
>> > > Upgrade 2 Package(s)
>> > >
>> > > Total download size: 29 M
>> > >
>> > > Is this ok [y/N]: y
>> > >
>> > > Downloading Packages:
>> > >
>> > > (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB 00:00
>> > >
>> > > (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB 00:02
>> > >
>> > > (3/7): kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906 kB
>> 00:00
>> > >
>> > > (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00
>> > >
>> > > (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm | 2.9 MB 00:00
>> > >
>> > > (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB 00:00
>> > >
>> > > (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0 MB 00:00
>> > >
>> > >
>> >
>>
>> --------------------------------------------------------------------------------
>> > >
>> > > Total 6.7 MB/s | 29 MB 00:04
>> > >
>> > > warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature:
>> NOKEY, key
>> ID
>> > > 57bbccba
>> > >
>> > > Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm is not
>> installed
>> > >
>> > >
>> > >
>> > > Did Xen got installed with this?
>> > >
>> > > Will the grub.conf be automatically updtaed after I run this
>> command.
>> > > (But I dont see my grub.conf being updated)
>> > >
>> > > Any Idea what went wrong here.
>> > >
>> >
>> > Fedora 12 doesn't include Xen dom0 capable kernel, see:
>> > [7][17]http://fedoraproject.org/wiki/Features/XenPvopsDom0
>> >
>> > You need to get one of the 'testing' rpms, or compile it yourself.
>> >
>> > -- Pasi
>> >
>> > _______________________________________________
>> > Xen-users mailing list
>> > [8][18]Xen-users@xxxxxxxxxxxxxxxxxxx
>> > [9][19]http://lists.xensource.com/xen-users
>> >
>> > References
>> >
>> > Visible links
>> > 1. mailto:[20]bderzhavets@xxxxxxxxx
>> > 2.
>> [21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> > 3. mailto:[22]pasik@xxxxxx
>> > 4. mailto:[23]pasik@xxxxxx
>> > 5. mailto:[24]bodkekumar@xxxxxxxxx
>> > 6. mailto:[25]xen-users@xxxxxxxxxxxxxxxxxxx
>> > 7. [26]http://fedoraproject.org/wiki/Features/XenPvopsDom0
>> > 8. [27]http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
>> > 9. [28]http://lists.xensource.com/xen-users
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Xen-users mailing list
>> [29]Xen-users@xxxxxxxxxxxxxxxxxxx
>> [30]http://lists.xensource.com/xen-users
>>
>> References
>>
>> Visible links
>> 1. http://xen.org/
>> 2. mailto:bodkekumar@xxxxxxxxx
>> 3. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> 4. mailto:bderzhavets@xxxxxxxxx
>> 5. mailto:bodkekumar@xxxxxxxxx
>> 6. mailto:bodkekumar@xxxxxxxxx
>> 7. mailto:pasik@xxxxxx
>> 8. mailto:bderzhavets@xxxxxxxxx
>> 9. mailto:xen-users@xxxxxxxxxxxxxxxxxxx
>> 10. http://mc/compose?to=pasik@xxxxxx
>> 11. http://mc/compose?to=bderzhavets@xxxxxxxxx
>> 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> 13. http://mc/compose?to=pasik@xxxxxx
>> 14. http://mc/compose?to=pasik@xxxxxx
>> 15. http://mc/compose?to=bodkekumar@xxxxxxxxx
>> 16. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
>> 17. http://fedoraproject.org/wiki/Features/XenPvopsDom0
>> 18. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
>> 19. http://lists.xensource.com/xen-users
>> 20. http://mc/compose?to=bderzhavets@xxxxxxxxx
>> 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>> 22. http://mc/compose?to=pasik@xxxxxx
>> 23. http://mc/compose?to=pasik@xxxxxx
>> 24. http://mc/compose?to=bodkekumar@xxxxxxxxx
>> 25. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
>> 26. http://fedoraproject.org/wiki/Features/XenPvopsDom0
>> 27. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
>> 28. http://lists.xensource.com/xen-users
>> 29. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
>> 30. http://lists.xensource.com/xen-users
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 2 Mar 2010 09:13:03 +0200
> From: Pasi K?rkk?inen <pasik@xxxxxx>
> Subject: Re: [Xen-users] XCP Hanging at Setting Hostname
> To: James Troup <james@xxxxxxxxxxxxxxxxx>
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Message-ID: <20100302071303.GY2761@xxxxxxxxxxx>
> Content-Type: text/plain; charset=us-ascii
>
> On Tue, Mar 02, 2010 at 03:44:10PM +1030, James Troup wrote:
>> Hi,
>>
>> I posted this a week ago but got no response, so I am posting again in
>> hope that I do.
>>
>> XCP is hanging at (or just after) "Setting Hostname"
>>
>
> Just the init scripts.. what does it do after that?
> Just a wild guess: is your DNS configuration correct?
>
> -- Pasi
>
>> If you keep trying eventually it gets past this point.
>> It might take 5-20 attempts to get XCP to boot.
>> When it does boot all is stable.
>>
>> I have the same problem on 4 different boxes.
>>
>> 2 x INTEL Black Box Dual XEON server.
>> 1 x AMD II x250
>> 1 x Core2Duo NoteBook used for DEV.
>>
>> All 3 boxes are using mdadm raid 1.
>>
>> The problem was present with XCP 0.1 and is still present with XCP 0.1.1
>>
>> Thanks for your help.
>>
>> James
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-users
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 2 Mar 2010 09:17:30 +0200
> From: Pasi K?rkk?inen <pasik@xxxxxx>
> Subject: Re: [Xen-users] xen/next & pvm pci passthrough?
> To: Mark Hurenkamp <mark.hurenkamp@xxxxxxxxx>
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Message-ID: <20100302071730.GZ2761@xxxxxxxxxxx>
> Content-Type: text/plain; charset=us-ascii
>
> On Mon, Mar 01, 2010 at 11:34:43PM +0100, Mark Hurenkamp wrote:
>> Hi,
>>
>>
>> Does anyone know if pvm pci passthrough is supposed to work on xen/next
>> branch? I'm trying to get a device passed to the pvm, but things don't
>> work
>> the same as on xen/master (where i used pciback).
>>
>
> iirc xen/next is still missing some pci passthrough stuff.
> Btw the module is called xen-pciback nowadays.
>
> -- Pasi
>
>> Here's what i do on xen/master dom0:
>> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/cx23885/unbind
>> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/pciback/new_slot
>> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/pciback/bind
>>
>> Then when i boot the pvm using also xen/master kernel, it shows up on
>> lspci,
>> and i can load the driver.
>>
>> But when i run xen/next dom0, pciback doesn't seem to exist, so i use
>> pci-stub
>> to grab the device:
>>
>> lspci -n
>> 05:00.0 0400: 14f1:8852 (rev 02)
>>
>> echo -n "14f1 8852" > /sys/bus/pci/drivers/pci-stub/new_id
>> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/cx23885/unbind
>> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/pci-stub/bind
>>
>> Now i boot the same pvm using xen/next kernel, however nothing shows up on
>>
>> lspci after the pvm is up.
>>
>> Is this not working yet? Or am i just doing something wrong?
>>
>> My config file is the same for both, and contains the following:
>>
>> bootloader = "/usr/bin/pygrub"
>> maxmem = 1024
>> memory = 1024
>> name = "pvm"
>> vif = [ 'mac=aa:20:00:00:02:17, bridge=br0' ]
>> disk = [
>> 'phy:mirror/pvm_root,hda1,w',
>> 'phy:mirror/pvm_swap,hda2,w',
>> ]
>> pci = [
>> '0000:05:00.0'
>> ]
>> vcpus=2
>>
>>
>>
>> Regards,
>> Mark.
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-users
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 2 Mar 2010 09:17:58 +0200
> From: Pasi K?rkk?inen <pasik@xxxxxx>
> Subject: Re: [Xen-users] XCP Hanging at Setting Hostname
> To: James Troup <james@xxxxxxxxxxxxxxxxx>
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Message-ID: <20100302071758.GA2761@xxxxxxxxxxx>
> Content-Type: text/plain; charset=iso-8859-1
>
> On Tue, Mar 02, 2010 at 09:13:03AM +0200, Pasi Kärkkäinen wrote:
>> On Tue, Mar 02, 2010 at 03:44:10PM +1030, James Troup wrote:
>> > Hi,
>> >
>> > I posted this a week ago but got no response, so I am posting again in
>> > hope that I do.
>> >
>> > XCP is hanging at (or just after) "Setting Hostname"
>> >
>>
>> Just the init scripts.. what does it do after that?
>
> Eh.. I was supposed to write "check the init scripts" :)
> Too early morning..
>
> -- Pasi
>
>> Just a wild guess: is your DNS configuration correct?
>>
>> -- Pasi
>>
>> > If you keep trying eventually it gets past this point.
>> > It might take 5-20 attempts to get XCP to boot.
>> > When it does boot all is stable.
>> >
>> > I have the same problem on 4 different boxes.
>> >
>> > 2 x INTEL Black Box Dual XEON server.
>> > 1 x AMD II x250
>> > 1 x Core2Duo NoteBook used for DEV.
>> >
>> > All 3 boxes are using mdadm raid 1.
>> >
>> > The problem was present with XCP 0.1 and is still present with XCP 0.1.1
>> >
>> >
>> > Thanks for your help.
>> >
>> > James
>> >
>> > _______________________________________________
>> > Xen-users mailing list
>> > Xen-users@xxxxxxxxxxxxxxxxxxx
>> > http://lists.xensource.com/xen-users
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-users
>
>
>
> ------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
> End of Xen-users Digest, Vol 61, Issue 14
> *****************************************
>
--
Best Regards,
John Musbach
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home