WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] usb passthrough

On Fri, Feb 26, 2010 at 05:34:14PM -0500, chris wrote:
> I would be curious to see benchmarks comparing usb device passthrough
> with vt-d passthrough of a usb controller + device. Would be
> interesting to see what differences if any there are. If I get some
> time I will try to test this.
> 

See here for benchmark results:
http://www.xen.org/files/xensummit_intel09/PVUSBStatusUpdate.pdf

pvusb performance seems to be pretty close to dom0 native usb performance.

If using the normal qemu-dm usb passthrough it is limited to emulated usb 1.1,
so that'll be slow.

-- Pasi

>  - chris
> 
> On Fri, Feb 26, 2010 at 5:00 PM, James Harper
> <james.harper@xxxxxxxxxxxxxxxx> wrote:
> > Pvusb should work for most things. You might be thinking of the USB frontend
> > in gplpv which only works with a very limited number of storage devices (and
> > probably not at all since the last update)
> >
> > James
> >
> > Sent from my iPhone
> >
> > On 27/02/2010, at 5:25, "chris" <tknchris@xxxxxxxxx> wrote:
> >
> >> Pasi,
> >>
> >> I know, my understanding was that pvusb was simply for exposing usb
> >> mass storage as a block device to the domain. I've never actually used
> >> it but I believe you can do this with a hvm domain without anything
> >> special. If anyone can actually confirm this it would be good to know
> >> :)
> >>
> >> As far as his original question, he needs vt-d to passthrough any
> >> physical device to a hvm domain.
> >>
> >> - chris
> >>
> >> On Fri, Feb 26, 2010 at 10:03 AM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> >>>
> >>> On Fri, Feb 26, 2010 at 10:00:34AM -0500, chris wrote:
> >>>>
> >>>> He said it was a HVM guest. I don't think you can passthrough to a hvm
> >>>> domain anything except usb storage with pvusb, correct?
> >>>>
> >>>
> >>> pvusb is different from the 'normal' usb=1 / usbdevice = [] stuff..
> >>>
> >>> I'm not totally sure what devices are supported with pvusb and with the
> >>> normal usb passthrough.
> >>>
> >>> -- Pasi
> >>>
> >>>> On Fri, Feb 26, 2010 at 9:49 AM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> >>>>>
> >>>>> On Fri, Feb 26, 2010 at 09:49:38AM -0300, Sergio Charpinel Jr. wrote:
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> I want to use a webcam in a HVM guest, but my dom0 doesnt support VT-d
> >>>>>> (just VT).
> >>>>>>
> >>>>>
> >>>>> USB passthrough doesn't require VT-d, it's only required for PCI device
> >>>>> passthrough to HVM guests.
> >>>>>
> >>>>>> I tried passing the parameters usb=1 and usbdevice = [ '..' ] and I
> >>>>>> could see an usb device in domU. But it does not know which device is.
> >>>>>>
> >>>>>> Which are the possibilites to do that? I prefer to use hvm machines,
> >>>>>> but if it is not possible, with PV machines it can work?
> >>>>>>
> >>>>>
> >>>>> With PV guest you could passthrough the whole USB controller (the PCI
> >>>>> device)..
> >>>>>
> >>>>> -- Pasi
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Xen-users mailing list
> >>>>> Xen-users@xxxxxxxxxxxxxxxxxxx
> >>>>> http://lists.xensource.com/xen-users
> >>>>>
> >>>
> >>
> >> _______________________________________________
> >> Xen-users mailing list
> >> Xen-users@xxxxxxxxxxxxxxxxxxx
> >> http://lists.xensource.com/xen-users
> >

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users