I don't have a solution for you, but I can tell you that I run SLES 10 SP2 with
Xen on the PowerEdge R200 platform - Xen 3.2.1 and kernel 2.6.16 - without any
trouble. I use the integrated SAS6iR with a RAID1.
-Nick
>>> On 2009/12/27 at 14:13, Sebastien Villanueva Thurmes
<s.villanueva@xxxxxxxxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> i try to use XEN 3.2.1-amd64 /Debian gnu linux, kernel 2.6.26-2-xen-amd64 on
> a
> dell poweredge R200 server.
>
> This server use two HDD with a LSISAS1068E raid controller to make the raid
> mirroring.
>
> Unfortunatelly, it seems there are some hardware troubles.
>
> Troubles begin with : floppy unable to grab DMA2
> ioc0 LSISAS1068e b3 capabilities initator
> floppy 0 no floppy controllers found
> mptbase: ioc0: initiate recovery
> mptbase: ioc0: initiate recovery
> mptbase: ioc0: initiate recovery
>
>
> scsi0: ioc0: LSISAS1068e B3, FwRev = 00192
>
> here is the first big with call traces.
>
> and then i have
>
> 16:41:39 db1 kernel: ata1.00: qc timeout (cmd 0xa0)
> 16:41:39 db1 kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
> 0x6 frozen
> 16:41:39 db1 kernel: ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> 16:41:39 db1 kernel: cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00
> 16:41:39 db1 kernel: res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
> 0x5 (timeout)
> 16:41:39 db1 kernel: ata1.00: status: { DRDY ERR }
> 16:41:44 db1 kernel: ata1: link is slow to respond, please be patient
> (ready=0)
> 16:41:49 db1 kernel: ata1: device not ready (errno=-16), forcing hardreset
> 16:41:49 db1 kernel: ata1: soft resetting link
> 16:41:49 db1 kernel: ata1: nv_mode_filter: 0x701f&0x701f->0x701f,
> BIOS=0x7000
> (0xc0000000) ACPI=0x701f (60:900:0x11)
> 16:41:49 db1 kernel: ata1.00: configured for UDMA/33
> 16:41:49 db1 kernel: ata1: EH complete
> 16:41:54 db1 kernel: ata1.00: qc timeout (cmd 0xa0)
> 16:41:54 db1 kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
> 0x6 frozen
> 16:41:54 db1 kernel: ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> 16:41:54 db1 kernel: cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00
> 16:41:54 db1 kernel: res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
> 0x5 (timeout)
> 16:41:54 db1 kernel: ata1.00: status: { DRDY ERR }
> 16:41:59 db1 kernel: ata1: link is slow to respond, please be patient
> (ready=0)
> 16:42:04 db1 kernel: ata1: device not ready (errno=-16), forcing hardreset
> 16:42:04 db1 kernel: ata1: soft resetting link
> 16:42:04 db1 kernel: ata1: nv_mode_filter: 0x701f&0x701f->0x701f,
> BIOS=0x7000
> (0xc0000000) ACPI=0x701f (60:900:0x11)
> 16:42:04 db1 kernel: ata1.00: configured for UDMA/33
> 16:42:04 db1 kernel: ata1: EH complete
>
> Is there a solution to solve this problem?
>
> Thank you in advance.
--------
This e-mail may contain confidential and privileged material for the sole use
of the intended recipient. If this email is not intended for you, or you are
not responsible for the delivery of this message to the intended recipient,
please note that this message may contain SEAKR Engineering (SEAKR)
Privileged/Proprietary Information. In such a case, you are strictly
prohibited from downloading, photocopying, distributing or otherwise using this
message, its contents or attachments in any way. If you have received this
message in error, please notify us immediately by replying to this e-mail and
delete the message from your mailbox. Information contained in this message
that does not relate to the business of SEAKR is neither endorsed by nor
attributable to SEAKR.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home