Mozafar Roshany írta:
> Thanks for quick solution.
>
> I created two blktapctrl and tapdisk symlinks to point to
> xen-utils-wrapper; So now have this:
>
> # file /usr/sbin/* | grep -i wrap
> /usr/sbin/blktapctrl: symbolic link to
> `/usr/lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/cpuperf-perfcntr: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/cpuperf-xen: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/tapdisk: symbolic link to
> `/usr/lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xend: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xenperf: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xentop: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xentrace: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xentrace_format: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xentrace_setmask: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xentrace_setsize: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
> /usr/sbin/xm: symbolic link to
> `../lib/xen-common/bin/xen-utils-wrapper'
>
> But still does Not work :( . (I did restarted xend and domU).
My versions:
xen-utils-3.2-1
xen-utils-common: 3.3.1-3
could it be the reason?
>
> On Mon, Dec 21, 2009 at 9:57 AM, Gémes Géza <geza@xxxxxxxxxxx
> <mailto:geza@xxxxxxxxxxx>> wrote:
>
> Mozafar Roshany írta:
>
> Hi
>
> No, it did not work. I did: ln -s /usr/lib/xen-3.2-1/bin/*
> /usr/sbin/
> and restarted xend and that domU, but the same errors remain.
>
> Thanks Gemes.
>
>
> Ok I've checked back how I did. I've modified the xen-utils-common
> package, to include symlinks for tapdisk and blktapctrl for
> ../lib/xen-common/bin/xen-utils-wrapper.
> So sorry for misinforming you at the first time, please modify
> your symlinks to point to: ../lib/xen-common/bin/xen-utils-wrapper
>
> Good Luck!
>
> Geza
>
>
> On Sun, Dec 20, 2009 at 6:02 PM, Gémes Géza <geza@xxxxxxxxxxx
> <mailto:geza@xxxxxxxxxxx> <mailto:geza@xxxxxxxxxxx
> <mailto:geza@xxxxxxxxxxx>>> wrote:
>
> Mozafar Roshany írta:
>
> Hi all
>
> I was reading through Xen 3 user manual and saw this
> tap:aio
> should be used instead of loopback...
> Then I came to do that, but I can get it working with
> replacing `file' URI's with `tap:aio'.
>
> My OS: Debian Lenny 2.6.26-2-xen-amd64
>
> DomU Xen configuration file:
>
> kernel = '/boot/vmlinuz-2.6.26-2-xen-amd64'
> ramdisk = '/boot/initrd.img-2.6.26-2-xen-amd64'
> memory = '1024'
> root = '/dev/xvda1 ro'
> disk = [
>
> 'tap:aio:/xen/domains/test1/manu.img,xvda1,w',
>
> 'tap:aio:/xen/domains/test1/disk.img,xvda2,w',
> ]
> name = 'test1'
> vif = [ 'ip=10.1.1.50,mac=00:16:3E:51:E4:AD' ]
> on_poweroff = 'destroy'
> on_reboot = 'restart'
> on_crash = 'restart'
>
> The errors from console:
>
> [ 0.872134] Capability LSM initialized
> [ 0.872151] Mount-cache hash table entries: 256
> [ 0.872282] Initializing cgroup subsys ns
> [ 0.872290] Initializing cgroup subsys cpuacct
> [ 0.872295] Initializing cgroup subsys devices
> [ 0.872326] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.872333] CPU: L2 cache: 6144K
> [ 0.872340] CPU: Physical Processor ID: 1
> [ 0.872344] CPU: Processor Core ID: 3
> [ 0.872356] SMP alternatives: switching to UP code
> [ 0.879420] Freeing SMP alternatives: 21k freed
> [ 0.879535] Brought up 1 CPUs
> [ 0.881865] net_namespace: 1224 bytes
> [ 0.882025] NET: Registered protocol family 16
> [ 0.883053] Brought up 1 CPUs
> [ 0.883068] PCI: Fatal: No config space access
> function found
> [ 0.883075] PCI: setting up Xen PCI frontend stub
> [ 0.883750] ACPI: Interpreter disabled.
> [ 0.883758] Linux Plug and Play Support v0.97 (c)
> Adam Belay
> [ 0.883790] pnp: PnP ACPI: disabled
> [ 0.883979] suspend: event channel 7
> [ 0.884329] xen_mem: Initialising balloon driver.
> [ 0.885871] usbcore: registered new interface driver
> usbfs
> [ 0.885931] usbcore: registered new interface driver hub
> [ 0.885977] usbcore: registered new device driver usb
> [ 0.886139] PCI: System does not support PCI
> [ 0.886145] PCI: System does not support PCI
> [ 0.898148] NET: Registered protocol family 2
> [ 0.933769] IP route cache hash table entries: 32768
> (order: 6, 262144 bytes)
> [ 0.934013] TCP established hash table entries: 131072
> (order: 9, 2097152 bytes)
> [ 0.934815] TCP bind hash table entries: 65536
> (order: 8,
> 1048576 bytes)
> [ 0.935207] TCP: Hash tables configured (established
> 131072
> bind 65536)
> [ 0.935213] TCP reno registered
> [ 0.945775] NET: Registered protocol family 1
> [ 0.945859] checking if image is initramfs... it is
> [ 0.951155] Freeing initrd memory: 5252k freed
> [ 0.952017] platform rtc_cmos: registered platform RTC
> device (no PNP device found)
> [ 0.952017] audit: initializing netlink socket
> (disabled)
> [ 0.952017] type=2000 audit(1261321342.173:1):
> initialized
> [ 0.952017] VFS: Disk quotas dquot_6.5.1
> [ 0.952017] Dquot-cache hash table entries: 512
> (order 0,
> 4096 bytes)
> [ 0.952017] msgmni has been set to 2058
> [ 0.952017] Block layer SCSI generic (bsg) driver
> version
> 0.4 loaded (major 253)
> [ 0.952017] io scheduler noop registered
> [ 0.952017] io scheduler anticipatory registered
> [ 0.952017] io scheduler deadline registered
> [ 0.952017] io scheduler cfq registered (default)
> [ 0.953902] Linux agpgart interface v0.103
> [ 0.953947] Serial: 8250/16550 driver $Revision:
> 1.90 $ 4
> ports, IRQ sharing enabled
> [ 0.955284] brd: module loaded
> [ 0.955342] input: Macintosh mouse button emulation as
> /class/input/input0
> [ 0.955404] Xen virtual console successfully
> installed as hvc0
> [ 0.955451] Event-channel device installed.
> [ 0.960690] netfront: Initialising virtual ethernet
> driver.
> [ 0.961761] PNP: No PS/2 controller found. Probing ports
> directly.
> [ 0.962588] i8042.c: No controller found.
> [ 0.976078] mice: PS/2 mouse device common for all mice
> [ 0.976184] rtc_cmos rtc_cmos: rtc core: registered
> rtc_cmos as rtc0
> [ 0.976298] No iBFT detected.
> [ 0.976641] TCP cubic registered
> [ 0.976647] NET: Registered protocol family 17
> [ 0.976739] registered taskstats version 1
> [ 6.077230] XENBUS: Waiting for devices to initialise:
>
>
> 295s...290s...285s...280s...275s...270s...265s...260s...255s...250s...245s...240s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s...
> [ 301.076163] XENBUS: Timeout connecting to device:
> device/vbd/2050 (local state 3, remote state 2)
> [ 301.076173] XENBUS: Device not ready: device/vbd/2050
> [ 301.076179] XENBUS: Device with no driver:
> device/console/0
> [ 301.076186] drivers/rtc/hctosys.c: unable to open rtc
> device (rtc0)
> [ 301.076209] Freeing unused kernel memory: 216k freed
> Loading, please wait...
> Begin: Loading essential drivers ... [ 301.123168] SCSI
> subsystem initialized
> [ 301.124278] HP CISS Driver (v 3.6.20)
> done.
> Begin: Running /scripts/init-premount ... FATAL: Error
> inserting fan
>
> (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/fan.ko):
> No such device
> WARNING: Error inserting processor
>
> (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/processor.ko):
> No such device
> [ 301.172668] thermal: Unknown symbol
> acpi_processor_set_thermal_limit
> FATAL: Error inserting thermal
>
> (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/thermal.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> done.
> Begin: Mounting root file system ... Begin: Running
> /scripts/local-top ... done.
> Begin: Waiting for root file system ...
> done.
> Gave up waiting for root device. Common problems:
> - Boot args (cat /proc/cmdline)
> - Check rootdelay= (did the system wait long enough?)
> - Check root= (did the system wait for the right device?)
> - Missing modules (cat /proc/modules; ls /dev)
> ALERT! /dev/sda2 does not exist. Dropping to a shell!
>
>
> BusyBox v1.10.2 (Debian 1:1.10.2-2) built-in shell (ash)
> Enter 'help' for a list of built-in commands.
>
> /bin/sh: can't access tty; job control turned off
> (initramfs)
> =========================================
>
> I modprobed the xenblktap module and also googled, but
> no success.
>
> Thanks for any comment.
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
> <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
> <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>
>
> http://lists.xensource.com/xen-users
>
> With stock lenny packages blktapctrl ad tapdisk are out of your
> PATH, you should try to symlink them from
> /usr/lib/xen-3.2-1/bin/
> to /usr/bin or /usr/sbin, may need to restart xend and then
> try to
> load that tap:aio domain again.
> Hope that helps.
>
> Geza
>
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home