On Mon, Dec 14, 2009 at 01:06:10PM +0100, francisco javier funes nieto wrote:
> Yes!
>
> This is the lspci output from dom0:
>
> main:/etc/xen# lspci |grep Ethernet
> 04:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
> Ethernet Controller (Copper) (rev 01)
> 04:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
> Ethernet Controller (Copper) (rev 01)
>
>
> And the lspci from domU:
>
> proxy:~# lspci -v
> 00:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
> Ethernet Controller (Copper) (rev 01)
> Subsystem: Super Micro Computer Inc Device 0000
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at da020000 (32-bit, non-prefetchable) [size=128K]
> I/O ports at 3020 [size=32]
> Capabilities: [c8] Power Management version 2
> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
> Enable-
> Capabilities: [e0] Express Endpoint, MSI 00
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Device Serial Number 22-6c-32-ff-ff-48-30-00
> Kernel driver in use: e1000e
> Kernel modules: e1000e
>
> From this moment I'm still working in this domU to use this Ethernet
> passed by passthrough as primary interface for the Squid Proxy.
>
> The dom0 works as expected!
>
Btw current xen-unstable (upcoming Xen 4.0) doesn't need the "disable FLR"
patch,
it has an option you can use to overcome this:
http://lists.xensource.com/archives/html/xen-devel/2009-12/msg00682.html
"Actually we have such a xend option in the xen-unstable tree:
The option is at the end of /etc/xen/xend-config.sxp:
(pci-passthrough-strict-check yes). Uncomment it and change it to no and
do a "xend restart".
-- Pasi
>
> I'll put iperf results as soon I configure the Squid.
>
>
> Thanks!
>
> J.
>
>
>
> 2009/12/14 Pasi Kärkkäinen <pasik@xxxxxx>:
> > On Mon, Dec 14, 2009 at 12:30:09PM +0100, francisco javier funes nieto
> > wrote:
> >> Thanks to all, it works like a charm.
> >>
> >> Now I have the Ethernet device in the DomU, once I patched the Xen
> >> Source Tree and recompile with the FLR patch.
> >>
> >> Great!
> >>
> >> Really Great!
> >>
> >
> > Hello.
> >
> > Just to confirm, with the FLR patch, you're able to use the first port
> > in dom0, and passthrough the second port to domU?
> >
> > Thanks!
> >
> > -- Pasi
> >
> >> Javier
> >>
> >> 2009/12/9 Stefan Kuhne <stefan.kuhne@xxxxxxx>:
> >> > francisco javier funes nieto schrieb:
> >> >> Thank's Stefan but I've not found a diff path to apply the source code
> >> >> of Xen... I'll do a deep search, thank's again.
> >> >>
> >> > I've found it in my archiv:
> >> > http://old.nabble.com/Error:-pci:-0000:02:06.0-must-be-co-assigned-to-the-same-guest-with-0000:02:05.0-td21280150.html
> >> >
> >> > Stefan Kuhne
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> _____________________________________________
> >>
> >> Francisco Javier Funes Nieto [esencia@xxxxxxxxx]
> >> CANONIGOS
> >> Servicios Informáticos para PYMES.
> >> Cl. Cruz 2, 1º Oficina 7
> >> Tlf: 958.536759 / 661134556
> >> Fax: 958.521354
> >> GRANADA - 18002
> >>
> >> _______________________________________________
> >> Xen-users mailing list
> >> Xen-users@xxxxxxxxxxxxxxxxxxx
> >> http://lists.xensource.com/xen-users
> >
>
>
>
> --
> _____________________________________________
>
> Francisco Javier Funes Nieto [esencia@xxxxxxxxx]
> CANONIGOS
> Servicios Informáticos para PYMES.
> Cl. Cruz 2, 1º Oficina 7
> Tlf: 958.536759 / 661134556
> Fax: 958.521354
> GRANADA - 18002
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home