Re: [Xen-users] Problem creating vm with two nics

[Dennis Storm - Drecomm BV <d.storm@xxxxxxxxxx>]

Do you have any logging from Xen you could paste to the list? Might help 
to see where the issues are.
Met vriendelijke groet,

Dennis Storm - Senior Systeembeheerder
Telefoon: (050) 577 58 22 (toestel 9701)
Mobiel: 06 4141 0181
E-mail: d.storm@xxxxxxxxxx


Drecomm BV "Internet Intelligence"
Opensource Internet Oplossingen

Vestiging Groningen:
    Hoendiep 208
    9745 ED  Groningen
    T:  +31 (0)50 577 58 22
    F:  +31 (0)50 577 58 23

Vestiging Rotterdam,  Walenburgerweg 46,  3033 AD  Rotterdam
Vestiging Amersfoort, Bergstraat 25, 3811 NE  Amersfoort



Martin Aceto wrote:
> Hello list,
>
> I 'm new on the mailing list. I've been using Xen for several years, but 
> always with basic configurations and it worked for me, also i have 
> several Debian/Xen servers working on production stages and they work 
> really fine.
> But now i have  some big trouble that i cannot solve, i'll give you some 
> info to see if someone can give me a hand:
> Server: Sun x86
> OS: Debian Lenny
> Xen Hypervisor: 3.4.22
>
> I need to configure two Nics eth0 and eth1
>
> eth0 is a public network(Internet)
> eth1 is a private network (local)
>
> Right now i have the following configuration:
>
> /etc/network/interfases
>
> ### Static Mode ###############
> # The primary network interface
> #allow-hotplug eth0
> auto eth0
> iface eth0 inet static
>         address 10.10.10.145
>         netmask 255.255.255.240
>         network 10.10.10.144
>         broadcast 10.10.10.159
>         gateway 10.10.10.158
>
> #allow-hotplug eth1
> auto eth1
> iface eth1 inet static
>         address 192.168.10.10
>         netmask 255.255.255.0
>         network 192.168.10.0
>         broadcast 192.168.10.255
>         #gateway 192.168.10.1
>
> /etc/xen/xend-config.sxp
>
> (network-script network-bridge-wrapper)
> (vif-script vif-bridge)
>
> /etc/xen/scripts/network-
> bridge-wrapper
>
> #!/bin/sh
> dir=$(dirname "$0")
> "$dir/network-bridge" "$@" vifnum=0 netdev=eth0 bridge=xenbr0
> "$dir/network-bridge" "$@" vifnum=1 netdev=eth1 bridge=xenbr1
>
>
> ifconfig
>
> lo        Link encap:Local Loopback 
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> peth0     Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b8 
>           inet6 addr: fe80::214:4fff:feca:47b8/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:6292 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:6414 errors:8 dropped:0 overruns:0 carrier:8
>           collisions:19 txqueuelen:100
>           RX bytes:580331 (566.7 KiB)  TX bytes:3437154 (3.2 MiB)
>           Memory:fbee0000-fbf00000
>
> peth1     Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b9 
>           inet6 addr: fe80::214:4fff:feca:47b9/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:202 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           RX bytes:12120 (11.8 KiB)  TX bytes:846 (846.0 B)
>           Memory:fbe60000-fbe80000
>
> xenbr0    Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b8 
>           inet addr:10.10.10.145  Bcast:0.0.0.0  Mask:255.255.255.240
>           inet6 addr: fe80::214:4fff:feca:47b8/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:6084 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:6401 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:482561 (471.2 KiB)  TX bytes:3436112 (3.2 MiB)
>
> xenbr1    Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b9 
>           inet addr:192.168.10.10  Bcast:0.0.0.0  Mask:255.255.255.0
>           inet6 addr: fe80::214:4fff:feca:47b9/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:0 (0.0 B)  TX bytes:468 (468.0 B)
>
>
> And when i want to run a virtual machine, it halts when it's booting
>
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> IPv6 over IPv4 tunneling driver
>
> and it doesn't continue! Has anyone have any idea of what am I doing wrong?
>
> Thank you!
>
> --
> Martin Aceto
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users