RE: [Xen-users] How do you give USB to a Windows domU?

["Dustin Henning" <Dustin.Henning@xxxxxxxxxxx>]

        I think eth4 is correct anyway.  eth4 is listed under "bridge name" in 
brctl show, I suspect the OP was just having trouble deciphering the output (or 
the way the bridge script works).
        Dustin

From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Mr. Teo En Ming 
(Zhang Enming)
Sent: Tuesday, November 03, 2009 12:14
To: James Pifer
Cc: space.time.universe@xxxxxxxxx; Xen List; Nick Couchman
Subject: Re: [Xen-users] How do you give USB to a Windows domU?

According to brctl show, your ethernet bride is eth4 and not peth4.

Try this:

vif=[ 'mac=00:16:3e:1a:45:41,bridge=eth4' ]

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical 
Engineering)
Alma Maters:
(1) Singapore Polytechnic
(2) National University of Singapore
My Primary Blog: http://teo-en-ming-aka-zhang-enming.blogspot.com
My Secondary Blog: http://enmingteo.wordpress.com
My Youtube videos: http://www.youtube.com/user/enmingteo
Email: space.time.universe@xxxxxxxxx
Mobile Phone (Starhub Prepaid): +65-8369-2618
Street: Bedok Reservoir Road
Country: Singapore
On Wed, Nov 4, 2009 at 12:49 AM, James Pifer <jep@xxxxxxxxxxxxxxxx> wrote:
On Tue, 2009-11-03 at 08:59 -0700, Nick Couchman wrote:
> You might need to specify "bridge=<bridgename>" on the "vif=" line in your 
> config file and point it at a specific bridge.
>
> -Nick

How can I tell what the bridge is called? Is it eth4 or peth4?

brctl show gives me:
bridge name     bridge id               STP enabled     interfaces
eth4            8000.002655827dd4       no              peth4


# ifconfig
eth4      Link encap:Ethernet  HWaddr 00:26:55:82:7D:D4
         inet addr:172.16.4.153  Bcast:10.96.5.255  Mask:255.255.254.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:147511 errors:0 dropped:0 overruns:0 frame:0
         TX packets:121841 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:30694748 (29.2 Mb)  TX bytes:36280012 (34.5 Mb)

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:114 errors:0 dropped:0 overruns:0 frame:0
         TX packets:114 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:6850 (6.6 Kb)  TX bytes:6850 (6.6 Kb)

peth4     Link encap:Ethernet  HWaddr 00:26:55:82:7D:D4
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:147623 errors:0 dropped:0 overruns:0 frame:0
         TX packets:124186 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:33415763 (31.8 Mb)  TX bytes:36952614 (35.2 Mb)
         Interrupt:20 Memory:f8000000-f8012100


I tied this these didn't work:
vif=[ 'bridge=peth4,mac=00:16:3e:1a:45:41,model=rtl8139,type=ioemu', ]
vif=[ 'bridge=eth4,mac=00:16:3e:1a:45:41,model=rtl8139,type=ioemu', ]

I'd still like to get virt-manager working too, but not sure to go about
that.

Thanks,
James


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users






_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users