| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Fwd: Device 0 (vif) could not be connected. Hotplug scri
"Error: Device 51744 (vbd) could not be connected. Hotplug
scripts not working.", which is quite vague."
You
might have smaller no of loopback devices in your domain. By the
default there are only 8 loops available. but you can increase the
limit up to 256 max this way:-
1- Add this line to /etc/modprobe.conf
options loop max_loop=256
2- The other way is to add 'loop' to /etc/modules
and add the same above mentioned option in /etc/modprobe.d/options
Regards,
Fasiha Ashraf
Fasiha Ashraf
--- On Sat, 11/7/09, cmasmas cmasmas <cmasmas10@xxxxxxxxx> wrote:
From: cmasmas cmasmas <cmasmas10@xxxxxxxxx>
Subject: [Xen-users] Fwd: Device 0 (vif) could not be connected. Hotplug scripts not working.
To: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Saturday, 11 July, 2009, 1:10 AM
Hi:
I'm newbie to Xen. I'm using Suse as Dom0, and
Debian5 as DomU. If no IP is specified, VM starts OK. Else, it fails
and shows the following error:
Device 0 (vif) could not be connected. Hotplug scripts not working.
Googl'ing a lot bit I've seen this error is quite
common, but I have found no solution. Any ideas? If you need any other
information, just ask ;)
Thanks!!!
-----Inline Attachment Follows-----
|
See the Web's breaking stories, chosen by people like you. Check out Yahoo! Buzz.._______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home