| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] problem with xm create
Looks like a bigger problem. Could you post your Xen version number and
the domU configuration file please?
PS: I'm always getting two equivalent mails from you?!!
Please just do a "Reply to all", meaning you send exactly one mail to
me with "xen-users@xxxxxxxxxxxxxxxxxxx" as CC.
elli_dberg@xxxxxx wrote:
Hi Andreas, and everyone,
I did as you said and I set extra= "xencons=tty". Now the boot precess goes some more lines further but now there is another problem. These are the last lines of the output of xm create -c ...
...
fuse init (API version 7.7)
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
Done.
chvt: can't open console
chvt: VT_ACTIVATE: Bad file descriptor
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
chvt: can't open console
chvt: VT_ACTIVATE: Bad file descriptor
ALERT! /dev/sda1 does not exist. Dropping to a shell!
BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu7) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)
Does that mean that the virtual machine cannot recognize the file system? I have a SATA hard drive and I am using the same kernel and setup as for dom0. I tried also specifying the root device as its UUID but didn't work neither.
Do have any idea?
Thank you
Andreas Sommer <AndiDog@xxxxxx> schrieb am 30.06.2009 12:53:02:
Check if "xm list" shows you a running state ("r" for running or "b" for
booting, "p" often means that an error occurred). I guess you might have
forgotten the line
extra = ''xencons=tty"
so the domU seems to hang because it doesn't show the login prompt on
the correct console.
Compare to this thread:
http://lists.xensource.com/archives/html/xen-users/2009-06/msg00409.html
elli_dberg@xxxxxx wrote:
Hi,
I am having troubles starting a domU. I run it with: xm create -c config_file. Then I can see the output and it seems as if everything is going well. Then, the output suddenly stops without any failures and there is nothing I can do. The cursor is blinking but not responding to any keyboard inputs. I even cannot kill the process with ctrl+c. When I run xen-list-images it shows the image:
$ xen-list-images
Name: virtualrouter1
Memory: 128
IP: 10.23.100.13
Here is the output of xm create:
Using config file "./virtualrouter1.cfg".
Started domain virtualrouter1 (id=2)
Bootdata ok (command line is root=/dev/sda1 ro )
Linux version 2.6.18.8-xen (root@virtualrouter1) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #2 SMP Wed Jun 24 14:11:03 CEST 2009
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 66660
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
Xen reported: 3000.680 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Software IO TLB disabled
Memory: 231424k/270336k available (2585k kernel code, 30416k reserved, 1122k data, 192k init)
Calibrating delay using timer specific routine.. 6002.56 BogoMIPS (lpj=30012826)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 20068k freed
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
suspend: event channel 6
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1246352198.193:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2
Copyright (c) 2008 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.56.5-NAPI
Copyright (c) 1999-2008 Intel Corporation.
Xen virtual console successfully installed as xvc0
Event-channel device installed.
blktap_device_init: blktap device major 254
blktap_ring_init: blktap ring major: 253
netfront: Initialising virtual ethernet driver.
vif vif-0: 2 parsing device/vif/0/mac
vif vif-1: 2 parsing device/vif/1/mac
vif vif-2: 2 parsing device/vif/2/mac
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
st: Version 20050830, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
aoe: aoe_init: AoE v22 initialised.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
PCI IO multiplexer device installed.
XENBUS: Device with no driver: device/console/0
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 192k freed
fuse init (API version 7.7)
What could be the problem? Appreciate any help.
Thank you,
Elisabeth
______________________________________________________
GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://movieflat.web.de
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home