Dear All,
I now have my Dom0 working nicely running Ubuntu Jaunty. I am now
trying to boot Images I had been using without problem under my
previous Xen installation (Gentoo). For the Dom0 host kernel I am
using the debian package
linux-image-2.6.26-2-xen-686_2.6.26-15_i386.deb. The DomU kernel is
one I compiled myself a while ago (sometime last year and has always
worked on Gentoo and I think even Centos)
Unfortunately, there seems to be a problem with the DomU not
recognizing the virtual disk image.
/etc/xen/ubuntu looks like this:
kernel = "/workarea/xen/kernels/vmlinuz"
memory = 1024
name = "ubuntu"
vif = [ '' ]
dhcp = "dhcp"
disk = ['tap:aio:/workarea/xen/images/ubuntu.img,sda1,w',
'tap:aio:/workarea/xen/images/swapubuntu.img,sda2,w']
root = "/dev/sda1 ro"
and the console output of the failed boot is like this:
Using config file "./ubuntu".
Started domain ubuntu
Linux version 2.6.21-xen (root@localhost) (gcc
version 4.1.2 (Gentoo 4.1.2 p1.1)) #3 Mon Oct 13 16:05:59 CEST 2008
BIOS-provided physical RAM map:
sanitize start
sanitize bail 0
copy_e820_map() start: 0000000000000000 size: 0000000040800000 end:
0000000040800000 type: 1
Xen: 0000000000000000 - 0000000040800000 (usable)
304MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 186366
Normal 186366 -> 186366
HighMem 186366 -> 264192
early_node_map[1] active PFN ranges
0: 0 -> 264192
Detected 2992.570 MHz processor.
Built 1 zonelists. Total pages: 262129
Kernel command line: root=/dev/sda1 ro ip=:127.0.255.255::::eth0:dhcp
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2992.576 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f53fe000, maxmem 2d7fe000
Memory: 1032872k/1056768k available (2310k kernel code, 15028k
reserved, 708k data, 168k init, 311304k highmem)
virtual kernel memory layout:
fixmap : 0xf56ed000 - 0xf57fe000 (1092 kB)
pkmap : 0xf5400000 - 0xf5600000 (2048 kB)
vmalloc : 0xee000000 - 0xf53fe000 ( 115 MB)
lowmem : 0xc0000000 - 0xed7fe000 ( 727 MB)
.init : 0xc03f6000 - 0xc0420000 ( 168 kB)
.data : 0xc0341b2d - 0xc03f2e98 ( 708 kB)
.text : 0xc0100000 - 0xc0341b2d (2310 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6026.31 BogoMIPS (lpj=3013157)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Intel Pentium 4 (Foster) stepping 03
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
Setting up standard PCI resources
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block numbers,
no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Failed to obtain physical IRQ 6
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
netfront: device eth0 has copying receive path.
st: Version 20070203, fixed bufsize 32768, s/g segs 256
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: multipath personality registered for level -4
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
XENBUS: Timeout connecting to device: device/vbd/2049 (state 3)
XENBUS: Timeout connecting to device: device/vbd/2050 (state 3)
XENBUS: Device with no driver: device/console/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "sda1" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Could anyone please give me some clues as to what might be happening.
Thanks so much for your help,
Regards,
Nicholas
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home