xen-users
[Xen-users] I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0
I have a headless CentOS 5.3 box running Xen 3.3.1. The DomU (domcont)
is running off a DRBD device and the network bridge (br0) is running
over a bonded ethernet link. All network interfaces are running fine
and the DRBD devices replicate over their respective links. The DRBD
device that I am trying to boot off is /dev/drbd1 and is set to
Primary on the Dom0 that is running this DomU.
The current configuration file for the DomU is as follows:
kernel = "/usr/lib/xen/boot/hvmloader"
builder = 'hvm'
memory = '4096'
name = "domcont"
vcpus = 3
vif = [ 'bridge=br0' ]
disk = [ 'phy:/dev/drbd1,hda,w' ,'file:/mnt/images/
2003Srvx64CD1.iso,hdc:cdrom,r']
device_model='/usr/lib64/xen/bin/qemu-dm'
cdrom='/dev/hdc'
ne2000=0
boot='c'
sdl=0
vnc=1
vncviewer=0
stdvga=0
The DomU can boot if vnc=0 in the DomUs configuration file but as soon
as I enable VNC it crashes with the following error in the qemu-dm log:
domid: 3
qemu: the number of cpus is 3
config qemu network with xen bridge for tap3.0 br0
Watching /local/domain/0/device-model/3/logdirty/next-active
Watching /local/domain/0/device-model/3/command
qemu_map_cache_init nr_buckets = 10000 size 3145728
shared page at pfn efffe
buffered io page at pfn efffc
Time offset set 0
Register xen platform.
Done register platform.
medium change watch on `hdc' (index: 1): /mnt/images/2003SrvCD1.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
When I run 'xm create domcont' as root with vnc=1 in the configuration
file the DomU immediately crashes and does not show when I run 'xm
list'.
Thanks for your help in advance.
Regards,
Daniel Davis
Centre IT
Ph: 08 89520909
Fax: 08 89188001
Email: daniel@xxxxxxxxxxxxxxx
Tenancy 2A, Level 1
8 Gregory Tce
or PO Box 4293
Alice Springs
NT, 0870
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 with VNC enabled,
Daniel Davis <=
|
Previous by Date: |
[Xen-users] Fedora 10-VM hung, Time issue and /dev/proc/sys/xen missing, HVM VMs recognized as PV, Lionel Raynaud |
Next by Date: |
[Xen-users] I/O request not ready when VNC enabled, daniel |
Previous by Thread: |
[Xen-users] Fedora 10-VM hung, Time issue and /dev/proc/sys/xen missing, HVM VMs recognized as PV, Lionel Raynaud |
Next by Thread: |
Re: [Xen-users] I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 with VNC enabled, Fajar A. Nugraha |
Indexes: |
[Date]
[Thread]
[Top]
[All Lists] |
|
|