|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] IPv6 not working on with CentOS dom0
Hi,
I'm having IPv6 problems with my CentOS 5.2 dom0 while the same NetBSD/i386 5.0
domU running on Debian 5.0 dom0 works as expected. CentOS is running gitco's Xen
3.3.1 packages and Debian is running self-compiled Xen 3.3.1.
My dom0 kernels:
# uname -srm
Linux 2.6.18-92.1.22.el5xen x86_64
# uname -srm
Linux 2.6.18.8-xen x86_64
My domU configuration file:
name = 'p140'
memory = 512
kernel = '/var/tmp/netbsd-XEN3PAE_DOMU.gz'
disk = [ 'phy:/dev/iscsi/p140,sda,w' ]
vif = [ 'mac=00:16:3e:01:40:01, bridge=vlan2000' ]
My vlan2000 interface:
# brctl show | grep vlan2000
vlan2000 8000.0015c5fc2806 no eth1.2000
# ifconfig eth1.2000
eth1.2000 Link encap:Ethernet HWaddr 00:15:C5:FC:28:06
inet6 addr: fe80::215:c5ff:fefc:2806/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1674 errors:0 dropped:0 overruns:0 frame:0
TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:170201 (166.2 KiB) TX bytes:14533 (14.1 KiB)
# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:15:C5:FC:28:06
inet addr:0.0.0.1 Bcast:0.0.0.1 Mask:255.255.255.255
inet6 addr: fe80::215:c5ff:fefc:2806/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4080 errors:0 dropped:0 overruns:0 frame:0
TX packets:3635 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:544726 (531.9 KiB) TX bytes:724917 (707.9 KiB)
Interrupt:21
domU on CentOS dom0
-------------------
# sysctl -w net.inet6.ip6.accept_rtadv=1
net.inet6.ip6.accept_rtadv: 0 -> 1
# rtsol xennet0
(wait for a moment)
# ifconfig xennet0
xennet0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
capabilities=2800<TCP4CSUM_Tx,UDP4CSUM_Tx>
enabled=0
address: 00:16:3e:01:40:01
inet6 fe80::216:3eff:fe01:4001%xennet0 prefixlen 64 scopeid 0x1
domU on Debian dom0
-------------------
# sysctl -w net.inet6.ip6.accept_rtadv=1
net.inet6.ip6.accept_rtadv: 0 -> 1
# rtsol xennet0
(wait for a moment)
# ifconfig xennet0
xennet0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
capabilities=2800<TCP4CSUM_Tx,UDP4CSUM_Tx>
enabled=0
address: 00:16:3e:01:40:01
inet6 fe80::216:3eff:fe01:4001%xennet0 prefixlen 64 scopeid 0x1
inet6 2001:xxxx:xxxx:xxxx:216:3eff:fe01:4001 prefixlen 64
So, there's no IPv6 traffic when the domU is running on CentOS dom0. Any ideas?
Martti
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Xen-users] IPv6 not working on with CentOS dom0,
Martti Kuparinen <=
|
|
|
|
|