[Xen-users] network-route problem, maybe over GPLPV driver

[Johnny Bravo <JohnnyBravo@xxxxxxx>]

Hello to all! please help at least on third time

My situation:
I have Suse 11.1 64bit dom0 and 4 hvm domu: 2 - windows 2008 with full  
gplpv drivers installed (0.9.12-pre13) and 2 - debian lenny 32 bit (if  
u know how to make normal shutdown for lenny domu via xm shutdown  
please let me know :) )
network config - network-bridge, vif-bridge
Everything was great with bridging config but I decide to move to  
network-route/vif-route config and here comes my problem: all lenny  
domu become unrechable, all pings telnets sshs finishs by Destination  
unreachable
ifconfig in dom0 shows me it:

debvl Link encap:EthernetHWaddr FE:FF:FF:FF:FF:FF
inet addr:80.45.22.55Bcast:80.255.255.255Mask:255.255.255.255
UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:795 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b)TX bytes:0 (0.0 b)

so all packets drops, if I ping from domu (lenny) I have the same  
Destination unreachable but RX/TX counters in dom0 stay zero
with other domu - windows 2008 with GPLPV drivers everything is ok, I  
can access from/to them
I try to reinstall lenny-domu, add new ones, add windows one without  
gplpv driver - same situation - Destination unreachable, now I will  
try to install gplpv driver to new windows domu - i think it will  
help, but what i should to do with lenny-domu?
hvm config for all domu is the same, exept vif parametrs and disk modes:

import os, re
arch = os.uname()[4]
if re.search('64', arch):
arch_libdir = 'lib64'
else:
arch_libdir = 'lib'
kernel = '/usr/lib/xen/boot/hvmloader'
builder='hvm'
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
name = 'blabla'
memory = 2048
maxmem = 2048
vcpus=2
acpi=1
usb=1
#usbdevice='host:0529:0001' - :)    if u know how to transfer alladin  
dongle to hvm domu please let me know, cose this one doesnot  
work        :)
usbdevice='tablet'
apic=1
shadow_memory=16
vif=['ip=192.168.200.3,mac=00:16:3e:74:47:b6,vifname=Dtbin']
disk = ['phy:/dev/virtpart2/hdd1,hda,w']
boot='c'
sdl=0
vnc=1
vncviewer=1
vncdisplay=2
localtime='yes'
stdvga=0
serial='pty'
#ne2000=0
on_poweroff='destroy'
on_reboot='restart'
on_crash='restart'
on_xend_start='start'
on_xend_stop='shutdown'


PS Sorry for my english :)


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users