| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] Redhat EL 5.2 guest on Redhat EL 5.2 host
For the gain of anyone else reading.
I set my host HTTP server to host on 192.168.122.1 and then set the VM
to have an IP of 192.168.122.2
I could then access the HTTP-serverd loopback mounted ISO.
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Dean Pullen
Sent: 02 January 2009 18:43
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Redhat EL 5.2 guest on Redhat EL 5.2 host
Ok it finally does go to an error screen where it can't find the web
server with the image on it.
I'm not sure what I should be using as far as guest IP settings are
concerned.
Can someone let me know what they should, in theory, be, if I need to
use the http image on the host server via the guest?
My host IP setup is as follows (removed mac addresses):
eth0 Link encap:Ethernet HWaddr
inet addr:10.153.181.5
Bcast:10.153.181.255 Mask:255.255.255.0
inet6 addr: fe80::222:64ff:fe98:86a2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3278866 errors:0 dropped:0 overruns:0 frame:0
TX packets:2001124 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4382317895 (4.0 GiB) TX bytes:384832182 (367.0 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:424882 errors:0 dropped:0 overruns:0 frame:0
TX packets:424882 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:127145354 (121.2 MiB) TX bytes:127145354 (121.2 MiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:3854347 errors:0 dropped:0 overruns:0 frame:0
TX packets:2125931 errors:3273 dropped:0 overruns:0
carrier:3273
collisions:688613 txqueuelen:1000
RX bytes:4432295792 (4.1 GiB) TX bytes:410143376 (391.1 MiB)
Interrupt:18 Memory:f8000000-f8012100
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:2001125 errors:0 dropped:0 overruns:0 frame:0
TX packets:3278866 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:384832320 (367.0 MiB) TX bytes:4382317895 (4.0 GiB)
vif17.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:22 errors:0 dropped:0 overruns:0 frame:0
TX packets:177 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:2164 (2.1 KiB) TX bytes:9204 (8.9 KiB)
virbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet addr:192.168.122.1 Bcast:192.168.122.255
Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:181 errors:0 dropped:0 overruns:0 frame:0
TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:14275 (13.9 KiB) TX bytes:6641 (6.4 KiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:20333 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6122514 (5.8 MiB) TX bytes:0 (0.0 b)
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Dean Pullen
Sent: 02 January 2009 17:08
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Redhat EL 5.2 guest on Redhat EL 5.2 host
This seems to be picked up by the installer - it now goes directly to
TCP/IP settings.
After entering them manually, as there is no DHCP server, it goes to a
blue screen and does nothing further.
If my host is set to 10.0.0.1 I'm using 10.0.0.2. Should I be using some
bridge IP instead?
Any ideas?
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Dean Pullen
Sent: 02 January 2009 16:22
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Redhat EL 5.2 guest on Redhat EL 5.2 host
Thanks.
That's what I'm trying now, I'm glad I'm on the right track...
FYI it's a paravirtual guest I'm installing.
-----Original Message-----
From: John Haxby [mailto:john.haxby@xxxxxxxxxx]
Sent: 02 January 2009 16:21
To: Dean Pullen
Subject: Re: [Xen-users] Redhat EL 5.2 guest on Redhat EL 5.2 host
Dean Pullen wrote:
>
> The guest installer boots and then after language and keyboard layout
> questions, ask what the source installation media is...
>
> Selecting CD-ROM asks for a driver type, whereas selecting hard-drive
> asks if I'd like to add a HDD to the system, where upon if I select
> yes, it returns to the original menu.
>
> Any tips or links upon where I can go next?
>
If you're installing a paravirtual guest with virt-manager or
virt-install then try loop-back mounting the installation DVD where it
can be seen through a web browser and then use its url as the location
for installation. Check that the URL works from some other machine
before you do the installation :-)
If you're installing a hardware virtual guest, then install a
paravirtual guest instead: performance is generally quite a lot better.
jch
Scanned by MailDefender - managed email security from intY -
www.maildefender.net
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
Scanned by MailDefender - managed email security from intY -
www.maildefender.net
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
Scanned by MailDefender - managed email security from intY -
www.maildefender.net
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
Scanned by MailDefender - managed email security from intY -
www.maildefender.net
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home