Re: [Xen-users] RE: [Xen-devel] GPLPV drivers 0.9.12-pre9 upload

["Wizard Vandal" <wizard580@xxxxxxxxx>]

confirm BSOD with 0.9.12 pre9 driver on Windows server 2008 with latest updates.

2008/12/23 Andrew Lyon <andrew.lyon@xxxxxxxxx>

On Sun, Dec 21, 2008 at 6:48 AM, Venefax <venefax@xxxxxxxxx> wrote:
> Dear James
> I removed the offending service as well as other left overs from the Suse
> Drivers and now my windows blue screens with
> Stop: 0x0000007B(0xf789EA94,0xC0000034,00000000,000000)
> I have no idea how to boot Windows in safe mode. Is this possible? How do
> you press F8, and if you did manage to boot in safe mode, what then?
> Federico
>
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of James Harper
> Sent: Friday, December 19, 2008 8:50 PM
> To: James Harper; xen-devel@xxxxxxxxxxxxxxxxxxx;
> xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] RE: [Xen-devel] GPLPV drivers 0.9.12-pre9 upload
>
>> 1. Windows 2000 is no longer included in the binary distribution. It
>> didn't work.
>>
>> 2. qemu network and disk adapters are disabled, but will now appear as
>> having failed due to a change in the hiding code. This is cosmetic
>> (you'll get a warning on start that a service or driver failed to
> start)
>> but the effect is the same, except you won't get strange things
>> happening as a result of pci devices just disappearing - I was seeing
>> delays in places during startup and shutdown.
>>
>> 3. If you are using the latest Xen 3.3.1 hg (maybe 3.3.0 too?), the
>> qemu_disable_patches.diff patch applied to the ioemu-remote git repo
>> (after 'make tools' has downloaded it, or after you've updated it to
> the
>> latest) will completely remove the ide disks and network interfaces,
>> leaving the cdroms as emulated by qemu. This is how things should be
>> going forward - qemu cdrom's means you get eject and virtual image
> swap
>> etc, and performance on a cdrom is hardly critical. Hopefully these
>> patches will make it into Xen 3.4.
>>
>> 4. Please test in a dev environment. I haven't broken my test servers
>> during upgrade or anything, but testing first is just common sense.
>>
>> 5. 64 bit block addressing is in place but not really tested. If you
>> have block devices >1TB that didn't work previously, please give it a
> go
>> and let me know.
>>
>> 6. Save+restore is working for me at the moment, please report any
>> issues.
>>
>
> Forgot one important thing. /GPLPV isn't required anymore. Use /NOGPLPV
> to disable the device drivers, or boot into safe mode which will also
> disable them.
>
> James
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>

I installed the drivers into a existing Vista 32 bit HVM which had
older version of the drivers installed and it bsod on reboot with
0x0000007B, I tried /nogpl and also safe mode but neither worked, I
reinstalled Vista and tried again but I got the same result.

Once the qemu drivers have been disabled by booting with /gplpv (or
without /nogplpv in newer versions) is it sufficient to reset/reboot
the domain to boot without the drivers, or does it need to be
destroyed and created again for the qemu emulation to resume?

Fresh install of vista + 0.9.12 pre9 = 0x0000007B :(.

What do I need to do to debug this?

I am running 3.3.1 rc4, I can try 3.3  if you think it might help,
perhaps I need the patch for hiding devices?

Andy

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

-- 
С Уважением, Виталий
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users