Can you tell me what file and what link?
Thanks
James
> -----Original Message-----
> From: Venefax [mailto:venefax@xxxxxxxxx]
> Sent: Thursday, 20 November 2008 03:30
> To: 'Nick Couchman'
> Cc: James Harper; xen-devel@xxxxxxxxxxxxxxxxxxx; xen-
> users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] GPLPV 0.9.12-pre4 uploaded
>
> I found the bad link in the driver's files and could not find it in
the
> site. It would be worth if you could replace the bad link for the good
one
> in the driver, as well.
>
>
>
> Federico
>
>
>
> From: Nick Couchman [mailto:Nick.Couchman@xxxxxxxxx]
> Sent: Wednesday, November 19, 2008 11:22 AM
> To: venefax@xxxxxxxxx
> Cc: james.harper@xxxxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx; xen-
> users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] GPLPV 0.9.12-pre4 uploaded
>
>
>
> Sorry, sent the wrong link...here's the correct one:
> http://wiki.xensource.com/xenwiki/XenWindowsGplPv
>
> -Nick
>
>
> -----Original Message-----
> From: Venefax <venefax@xxxxxxxxx
> <mailto:Venefax%20%3cvenefax@xxxxxxxxx%3e> >
> To: 'James Harper' <james.harper@xxxxxxxxxxxxxxxx
> <mailto:'James%20Harper'%20%3cjames.harper@xxxxxxxxxxxxxxxx%3e> >,
xen-
> users@xxxxxxxxxxxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] GPLPV 0.9.12-pre4 uploaded
> Date: Wed, 19 Nov 2008 09:33:48 -0500
>
>
> I am using Suse 10 SP2 and installed the drivers pre4, but the new
network
> card says "cable not connected". What do I have to do to make the
drivers
> work in Suse 10 Sp2? Any configuration at the global XEN level?
> Federico
>
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of James
Harper
> Sent: Wednesday, November 19, 2008 7:27 AM
> To: xen-users@xxxxxxxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] GPLPV 0.9.12-pre4 uploaded
>
> I've just uploaded 0.9.12-pre4 to http://www.meadowcourt.org/downloads
>
> Fixes/updates since 0.9.12-pre3:
> . rolled back IRQ restriction which would prevent the drivers from
> starting if the pci device wanted to use an IRQ < 16
> . fixed another bug in crash dump that could possibly cause corruption
> under high Dom0 disk load
> . performance improvements to xennet - udp performance is much much
> better, I can easily achieve 500MBits/second from Dom0<->DomU or
> DomU<->External machine over 1GBit/second wire. Tcp performance should
> be as good as before but with lower cpu.
>
> To see some of the the network performance improvements, you'll need
to
> disable 'Check checksum on RX packets'. It only exists as WHQL fails
> without it, even though it isn't a real-world scenario. The 'interrupt
> moderation' option appears to cause things to go slower at the
moment...
> it may reduce load but I think it needs some more tuning!
>
> If anyone can offer any suggestions as to why my Windows 2003 R2
server
> takes so long to get to the login prompt after boot with GPLPV but is
> quicker without it I'd like to hear them - it seems to get it's dhcp
> lease quickly enough so something else about the network adapter or
> about the gplpv drivers must be causing the delay...
>
> James
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
>
> ________________________________
>
>
> This e-mail may contain confidential and privileged material for the
sole
> use of the intended recipient. If this email is not intended for you,
or
> you are not responsible for the delivery of this message to the
intended
> recipient, please note that this message may contain SEAKR Engineering
> (SEAKR) Privileged/Proprietary Information. In such a case, you are
> strictly prohibited from downloading, photocopying, distributing or
> otherwise using this message, its contents or attachments in any way.
If
> you have received this message in error, please notify us immediately
by
> replying to this e-mail and delete the message from your mailbox.
> Information contained in this message that does not relate to the
business
> of SEAKR is neither endorsed by nor attributable to SEAKR.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home