|
xen-users
RE: [Xen-users] Building from Source
Franz,
Thanks! That document is awesome!
I followed it closely, modifying package names slightly where they differ in
Ubuntu.
However, I got the dom0 booted on 3.3. When I go to create a DomU, the same
thing happens as before. It starts up for just a moment, and then disappears
from xm list.
nathan@ubuntu:~$ sudo xm create lb1 && sudo xm list && sleep 1 && sudo xm list
Using config file "/etc/xen/lb1".
Started domain lb1
Name ID Mem VCPUs State Time(s)
Domain-0 0 3505 4 r----- 46.4
lb1 14 512 1 r----- 0.1
Name ID Mem VCPUs State Time(s)
Domain-0 0 3505 4 r----- 47.0
nathan@ubuntu:~$ cat /var/log/xen/qemu-dm-lb1.log.6
domid: 4
qemu: the number of cpus is 1
Watching /local/domain/0/device-model/4/logdirty/next-active
Watching /local/domain/0/device-model/4/command
xs_read(): vncpasswd get error.
/vm/d0050129-f2bb-7ce9-a443-d56a7e404781/vncpasswd.
qemu_map_cache_init nr_buckets = 4000 size 196608
shared page at pfn 1fffe
buffered io page at pfn 1fffc
Time offset set 0
Register xen platform.
Done register platform.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
nathan@ubuntu:~$ cat /etc/xen/lb1
name = "lb1"
builder = "hvm"
memory = "512"
device_model = "/usr/lib/xen/bin/qemu-dm"
kernel = "/usr/lib/xen/boot/hvmloader"
disk = ['phy:/dev/loop0,hda,w']
boot="c"
acpi="0"
serial = "pty"
vncpasswd = "test"
Thank You,
Nathan Eisenberg
Sr. Systems Administrator
Atlas Networks, LLC
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Franz Regensburger
Sent: Thursday, October 23, 2008 1:01 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Building from Source
Hello Nathan,
yesterday I managed to compile Xen 3.3 from the sources on Debian Etch.
I am not a XEN specialist myself but maybe my notes will help you since they
say that Ubuntu is closely related to Debian.
Especialy note the hints about configuring the XEN kernel below.
cd /usr/src/xen-3.3.0
make linux-2.6-xen-config CONFIGMODE=menuconfig
That may let you configure the
VMXASSIST=n
Regards,
Franz
##########################
Howto build Xen 3.3 from the sources on Debian Etch
---------------------------------------------------
Base: Debian Etch 4.0R4a netinst for AMD64/Intel64
Hints on the WEB say that we need a newer mercurial (V 0.9.5 or newer).
Newer than the standard V0.9.1 that is provided via Debian Etch
Problem: from where do we get the newer mercurial?
mkdir -p /usr/src/XEN_3.3.0
cd /usr/src/XEN_3.3.0
wget
http://packages.debian.org/etch-backports/all/mercurial-common/download/mercurial-common_1.0.1-5.1~bpo40+1_all.deb
wget \
http://www.backports.org/debian/pool/main/m/mercurial/mercurial_1.0.1-5.1~bpo40+1_amd64.deb
dpkg -i ./mercurial-common_1.0.1-5.1~bpo40+1_all.deb
dpkg -i ./mercurial_1.0.1-5.1~bpo40+1_amd64.deb
#####################
# Download other build tools:
# Attention: the apt-get will also deinstall packages
# Use aptitude instead to see the conflicts etc
# The problem is the 'hotplug'
# It conflicts with udev, kde and many others.
# The xen Readme states that we need hotplug OR udev
# --> we stay with udev and its dependent packages
# apt-get install iproute bridge-utils hotplug python libz-dev python-dev gawk
pciutils-dev
# apt-get install graphviz texlive-latex-base texlive-latex-pdfetex transfig
# apt-get install build-essential libssl-dev gettext python-dev libncurses5-dev
xorg-dev bcc
aptitude install iproute
aptitude install bridge-utils
# !!!! NO; do not install: aptitude install hotplug
aptitude install python
aptitude install libz-dev
aptitude install python-dev
aptitude install gawk
aptitude install pciutils-dev
aptitude install graphviz
# this install texlive and de-installs our normal tetex!
apt-get install tex-common texlive-base texlive-base-bin texlive-common \
texlive-doc-base texlive-doc-de texlive-lang-german \
texlive-latex-base texlive-pdfetex preview-latex-style \
texlive-latex-extra texlive-pictures texlive-fonts-recommended
# aptitude install texlive-latex-pdfetex ???
apt-get install texlive-latex-recommended
aptitude install texinfo
aptitude install transfig
aptitude install build-essential
aptitude install libssl-dev
aptitude install gettext
aptitude install python-dev
aptitude install libncurses5-dev
aptitude install xorg-dev
aptitude install bcc
#####################
# Get the Xen sources
# We download a tar ball of Xen 3.3 and clone the kernel tree
#####################
mkdir -p /usr/src/XEN_3.3.0
cd /usr/src/XEN_3.3.0
# Get Xen 3.3.0 sources
# Goto
# http://www.xen.org/download/index.html
# and download
# http://bits.xensource.com/oss-xen/release/3.3.0/xen-3.3.0.tar.gz
wget http://bits.xensource.com/oss-xen/release/3.3.0/xen-3.3.0.tar.gz
# Get the xen kernel tree
## DEPRECATED: instead we clone ourselves (see below)
# wget
http://bits.xensource.com/oss-xen/release/3.3.0/linux-2.6.18-xen-3.3.0.tar.gz
### cleanup
cd /usr/src
rm -rf xen-3.3.0
rm -rf linux-2.6.18-xen.hg
# unpack xen sources
cd /usr/src
tar xzf XEN_3.3.0/xen-3.3.0.tar.gz
# Get the xen kernel tree via cloneing
cd /usr/src
hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg
################################################
# Now, let's compile that Xen
cd /usr/src/xen-3.3.0
make KERNELS=linux-2.6-xen world
# Note: the option 'CONFIGMODE=menuconfig' is meant to be used with other
targets (see below)
# make linux-2.6-xen-config CONFIGMODE=menuconfig
#
# It works at least if we run 'make KERNELS=linux-2.6-xen world' once
# See the addon at the end down below.
# From the /usr/src/xen-3.3.0/README that contains all instruction for
building/installing!
# In /usr/src/xen-3.3.0 use
# make help
# to learn more about the targets.
#
# 5. To rebuild a kernel with a modified config:
#
# # make linux-2.6-xen-config CONFIGMODE=menuconfig (or xconfig)
# # make linux-2.6-xen-build
# # make linux-2.6-xen-install
# Other systems may requires the use of 'mkinitramfs' to create the
# ram disk.
# # depmod 2.6.18-xen
# # mkinitramfs -o initrd-2.6.18-xen.img 2.6.18-xen
# cleanup old xen-tools and kernels
make uninstall
make install
depmod 2.6.18.8-xen
# prepare the initrd config
## cp /etc/initramfs-tools/modules /etc/initramfs-tools/modules.orig
cat > /etc/initramfs-tools/modules <<HERE
# for Xen
md_mod
raid1
sd_mod
HERE
mkinitramfs -k -o /boot/initrd-2.6.18.8-xen.img 2.6.18.8-xen
# edit the grub menu
susi:/boot/grub# tail menu.lst
### END DEBIAN AUTOMAGIC KERNELS LIST
title Xen 3.3.0 / kernel 2.6.18.8-xen
root (hd0,0)
kernel /xen-3.3.0.gz console=vga
module /vmlinuz-2.6.18.8-xen root=/dev/mapper/RootVG-root ro
console=tty0
module /initrd-2.6.18.8-xen.img
savedefault
OR as a refined test for HVM
# Note: Adding the pciback.hide to the kernel options did not work as pciback is
# only compiled as a module by default.
# If we compile it as non-module (see below for instructions) it works
# no pciback.hide
title Xen 3.3.0 / kernel 2.6.18.8-xen no-backhide
root (hd0,0)
kernel /xen-3.3.0.gz console=vga noreboot max_loop=128 dom0_mem=1024M
module /vmlinuz-2.6.18.8-xen root=/dev/mapper/RootVG-root ro
console=tty0
module /initrd-2.6.18.8-xen.img
savedefault
# with pciback.hide and iommu for VT-d
title Xen 3.3.0 / kernel 2.6.18.8-xen backhide the ATI Radeon
root (hd0,0)
#kernel /xen-3.3.0.gz console=vga noreboot max_loop=128 dom0_mem=1024M
iommu=1
kernel /xen-3.3.0.gz console=vga noreboot max_loop=128 dom0_mem=1024M
module /vmlinuz-2.6.18.8-xen root=/dev/mapper/RootVG-root ro
console=tty0 pciback.hide=(01:00.
0)(01:00.1)
module /initrd-2.6.18.8-xen.img
savedefault
### link xen rc script
update-rc.d xend defaults 20 21
update-rc.d xendomains defaults 21 20
############################################
# Reboot your box and boot the Xen kernel
##########
# Add on, from http://wiki.xensource.com/xenwiki/VTdHowTo
# Compile PCI backend hide fixed into the kernel
How to turn on VT-d in Xen
1 ) cd xen-unstable.hg
2 ) make install
3 ) make linux-2.6-xen-config CONFIGMODE=menuconfig
4 ) change XEN->"PCI-device backend driver" from "M" to "*".
5 ) make linux-2.6-xen-build
6 ) make linux-2.6-xen-install
7 ) depmod 2.6.18.8-xen
8 ) mkinitrd -v -f --with=ahci --with=aacraid --with=sd_mod --with=scsi_mod
initrd-2.6.18-xen.img 2.6.1
8.8-xen
9 ) cp initrd-2.6.18-xen.img /boot
10) lspci - select the PCI BDF you want to assign to guest OS
11) "hide" pci device from dom0 as following sample grub entry:
title Xen-Fedora Core (2.6.18-xen)
root (hd0,0)
kernel /boot/xen.gz com1=115200,8n1 console=com1 iommu=1
module /boot/vmlinuz-2.6.18.8-xen root=LABEL=/ ro xencons=ttyS
console=tty0 console=ttyS0, pcib
ack.hide=(01:00.0)(03:00.0)
module /boot/initrd-2.6.18-xen.img
12) reboot system
13) add "pci" line in /etc/xen/hvm.conf for to assigned devices
pci = [ '01:00.0', '03:00.0' ]
15) start hvm guest and use "lspci" to see the passthru device and
"ifconfig" to see if IP address has been assigned to NIC devices.
##
# Try that on our xen host
cd /usr/src/xen-3.3.0
make linux-2.6-xen-config CONFIGMODE=menuconfig
change XEN->"PCI-device backend driver" from "M" to "*".
make linux-2.6-xen-build
make linux-2.6-xen-install
depmod 2.6.18.8-xen
mkinitramfs -k -o /boot/initrd-2.6.18.8-xen.img 2.6.18.8-xen
Boot .... and pciback.hide works as a kernel parameter
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
Home