WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] DomU networking problem in opensuse 11

To: Tommy Huang <tommy24@xxxxxxxx>
Subject: Re: [Xen-users] DomU networking problem in opensuse 11
From: Danilo Godec <danilo.godec@xxxxxxxxx>
Date: Wed, 22 Oct 2008 09:24:16 +0200
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Wed, 22 Oct 2008 00:24:57 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <BAY117-W27B63D21D439FD9D5E6E6BC7290@xxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <BAY117-W27B63D21D439FD9D5E6E6BC7290@xxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Thunderbird 2.0.0.17 (X11/20080922)
Check this out -
http://www.novell.com/communities/node/5071/sles-10-sp2-networking-under-xen-troubleshooting-and-recommendations

I use OpenSuSE 11 on a server with multiple network interfaces and I use
the above approach. Works great.

 Best regards, Danilo


Tommy Huang pravi:
> Hi,
>
> Creating a new domain is a lot easier in opensuse 11. I follow the 
> instruction on the website and build a virtual machine which uses opensuse 11 
> as well (I installed it from iso image). Everything works fine except the 
> network. I cannot access the Internet from DomU. Here is some information.
> P.S. the DomU id is 1.
>
> "brctl show" in Dom 0:
> bridge name     bridge id               STP enabled     interfaces
> eth0            8000.001d609d5af4       no              peth0
>                                                                             
> vif1.0
>
> "ip address" in Dom0:
>
> 1: lo:  mtu 16436 qdisc noqueue
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
>     inet 127.0.0.2/8 brd 127.255.255.255 scope host secondary lo
> 2: peth0:  mtu 1500 qdisc pfifo_fast qlen 100
>     link/ether 00:1d:60:9d:5a:f4 brd ff:ff:ff:ff:ff:ff
> 3: wmaster0:  mtu 1500 qdisc ieee80211 qlen 1000
>     link/ieee802.11 00:1c:df:4f:64:df brd ff:ff:ff:ff:ff:ff
> 4: wlan0:  mtu 1500 qdisc noop qlen 1000
>     link/ether 00:1c:df:4f:64:df brd ff:ff:ff:ff:ff:ff
> 5: eth0:  mtu 1500 qdisc noqueue
>     link/ether 00:1d:60:9d:5a:f4 brd ff:ff:ff:ff:ff:ff
>     inet 128.61.82.213/24 brd 128.61.82.255 scope global eth0
> 6: vif1.0:  mtu 1500 qdisc pfifo_fast qlen 32
>     link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
>
> "dmesg" in Dom0 (extracted):
>
> NET: Registered protocol family 17
> 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
> 0000:00:19.0: eth0: 10/100 speed: disabling TSO
> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> ip_tables: (C) 2000-2006 Netfilter Core Team
> Bridge firewalling registered
> tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> eth0 renamed to peth0
> tmpbridge renamed to eth0
> 0000:00:19.0: peth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
> 0000:00:19.0: peth0: 10/100 speed: disabling TSO
> device peth0 entered promiscuous mode
> eth0: port 1(peth0) entering learning state
> eth0: topology change detected, propagating
> eth0: port 1(peth0) entering forwarding state
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> device vif1.0 entered promiscuous mode
> eth0: port 2(vif1.0) entering learning state
> eth0: topology change detected, propagating
> eth0: port 2(vif1.0) entering forwarding state
> (cdrom_add_media_watch() file=drivers/xen/blkback/cdrom.c, line=108) 
> nodename:backend/vbd/1/51712
> (cdrom_is_type() file=drivers/xen/blkback/cdrom.c, line=95) type:0
> (cdrom_add_media_watch() file=drivers/xen/blkback/cdrom.c, line=108) 
> nodename:backend/vbd/1/51728
> (cdrom_is_type() file=drivers/xen/blkback/cdrom.c, line=95) type:1
> (cdrom_add_media_watch() file=drivers/xen/blkback/cdrom.c, line=110) is a 
> cdrom
> (cdrom_add_media_watch() file=drivers/xen/blkback/cdrom.c, line=112) xenstore 
> wrote OK
> (cdrom_is_type() file=drivers/xen/blkback/cdrom.c, line=95) type:1
> blkback: ring-ref 770, event-channel 9, protocol 1 (x86_32-abi)
> blkback: ring-ref 771, event-channel 10, protocol 1 (x86_32-abi)
>
> "ip address" in DomU:
> lo and eth0 are present. eth0 doesn't have an ip.
>
>
> Any information is appreciated. Thanks in advance.
>
> Regards,
> - Tommy
>
> _________________________________________________________________
> Want to read Hotmail messages in Outlook? The Wordsmiths show you how.
> http://windowslive.com/connect/post/wedowindowslive.spaces.live.com-Blog-cns!20EE04FBC541789!167.entry?ocid=TXT_TAGLM_WL_hotmail_092008
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>   


-- 
Danilo Godec, sistemska podpora

Predlog! Obiscite prenovljeno spletno stran http://www.agenda.si

ODPRTA KODA IN LINUX
STORITVE : POSLOVNE RESITVE : UPRAVLJANJE IT : INFRASTRUKTURA IT : 
IZOBRAZEVANJE : PROGRAMSKA OPREMA

Visit our updated web page at http://www.agenda.si

OPEN SOURCE AND LINUX
SERVICES : BUSINESS SOLUTIONS : IT MANAGEMENT : IT INFRASTRUCTURE : TRAINING : 
SOFTWARE 

Attachment: danilo_godec.vcf
Description: Vcard

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>