Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR

If you're able to run Windows, then you must have VT-d enabled.

--
Randy
www.FastServ.com

---------- Original Message -----------
From: anton <anton@xxxxxxxxxxxxxx>
To: xen-users@xxxxxxxxxxxxxxxxxxx
Sent: Sat, 11 Oct 2008 23:38:24 +0200
Subject: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P45 chipset.

> Hello everybody,

> I spend some time to get XEN up and running on ubuntu 8.04

> I am new to XEN

> XEN is installed with “apt-get install ubuntu-xen-server”

> Ultimate goal is to have hvm running with VT-D (PCI cards bounded to specific DomU’s)

> 4 Gb memory in MSI NEO3-FR motherboard with P45 chipset

> Everything (except VT-D) is working smoothly

> I can run all kind of OS’s in DomU’s (fedora, ubuntu, windows-XP, windows 2000 server etc)

> It runs fast and it is very stable.

> Next step is to run asterisk in a domU (fedora 8) with its own ISDN card (Fritz Card).

> However this is failing.

> If I start the DomU the following is displayed:

> root@vdl-linux-10:/etc/xen# xm create fedora8

> Using config file "./fedora8".

> Error: Fail to assign device(4:1.0): maybe VT-d is not enabled, or the device is not exist, or it has already been assigned to other domain

> root@vdl-linux-10:

> Questiona arised to me:

If I “disable” the device on the kernel line with pciback.hide=(04:01.0), this seems to work according to logging. However the device is still visible with lspci in Dom0. Is this normal ?
I am still not 100% convinced that my motherboard is VT-D compatible (BIOS ?) However if I read other posts , the output of ‘/sys/hypervisor/properties/capabilities’ and ‘/proc/cpuinfo’ should ensure that the system is VT-D capable. Latest BIOS is installed.
Is there any tool to ‘proof’ my system is VT-D capable ?
Any suggestions are welcome !

> Thanks in advance,

> Anton

> additional info:

> I have disabled all drivers in Dom0 so the card complety free as far as I can see with lsmod.

> There is NO option in the Bios to enable/disable virtualization

> ==============LSPCI =====================

> root@vdl-linux-10:/etc/xen# lspci

> 00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 02)

> 00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root Port (rev 02)

> 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4

> 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5

> 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6

> 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2

> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller

> 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1

> 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2

> 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1

> 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2

> 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3

> 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1

> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)

> 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller

> 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller

> 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller

> 01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7300 GS] (rev a1)

> 02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)

> 02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)

> 04:01.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 02) <-=-=

> 04:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

> root@vdl-linux-10:/etc/xen#

> ===============UNAME=========

> root@vdl-linux-10:/etc/xen# uname -a

> Linux vdl-linux-10 2.6.24-19-xen #1 SMP Wed Aug 20 21:08:51 UTC 2008 x86_64 GNU/Linux

> root@vdl-linux-10:/etc/xen#

> ===============CPUINFO========

> root@vdl-linux-10:/etc/xen# cat /proc/cpuinfo

> processor : 0

> vendor_id : GenuineIntel

> cpu family : 6

> model : 23

> model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz

> stepping : 10

> cpu MHz : 3007.568

> cache size : 64 KB

> physical id : 0

> siblings : 1

> core id : 0

> cpu cores : 1

> fpu : yes

> fpu_exception : yes

> cpuid level : 2

> wp : yes

> flags : fpu de tsc msr pae mce cx8 apic sep mtrr mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts rep_good pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr sse4_1 lahf_lm

> bogomips : 6016.91

> clflush size : 64

> cache_alignment : 64

> address sizes : 36 bits physical, 48 bits virtual

> power management:

> processor : 0

> vendor_id : GenuineIntel

> cpu family : 6

> model : 23

> model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz

> stepping : 10

> cpu MHz : 3007.568

> cache size : 64 KB

> physical id : 0

> siblings : 1

> core id : 0

> cpu cores : 1

> fpu : yes

> fpu_exception : yes

> cpuid level : 2

> wp : yes

> bogomips : 6016.91

> clflush size : 64

> cache_alignment : 64

> address sizes : 36 bits physical, 48 bits virtual

> power management:

> root@vdl-linux-10:/etc/xen#

> ==============HYPERVISOR==========

> root@vdl-linux-10:/etc/xen# cat /sys/hypervisor/properties/capabilities

> xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64

> root@vdl-linux-10:/etc/xen#

> =============GRUB============

> title Xen 3.2 / Ubuntu 8.04.1, kernel 2.6.24-19-xen

> root (hd0,0)

> kernel /boot/xen-3.2.gz iommu=1

> module /boot/vmlinuz-2.6.24-19-xen root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1

> module /boot/initrd.img-2.6.24-19-xen

> quiet

> ============DOMU================

> kernel = "/usr/lib/xen/boot/hvmloader"

> builder = 'hvm'

> extra =" iommu=soft swiotlb=force vtd=1"

> memory = 1024

> name = "fedora8"

> vcpus = 1

> vif = [ 'type=ioemu, bridge=xenbr0' ]

> disk = [ 'phy:/dev/sdb6,ioemu:hdb,w','phy:/dev/loop1,hda:cdrom,r' ]

> device_model = '/usr/lib/xen/bin/qemu-dm'

> ne2000=0

> sdl=0

> vnc=1

> pci = ['0:4:1.0']

> boot='c'

> ============XEND LOG==============

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:84) XendDomainInfo.create(['vm', ['name', 'fedora8'], ['memory', 1024], ['vcpus', 1], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['image', ['hvm', ['kernel', '/usr/lib/xen/boot/hvmloader'], ['args', ' iommu=soft swiotlb=force vtd=1'], ['device_model', '/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 1], ['boot', 'c'], ['fda', ''], ['fdb', ''], ['timer_mode', 0], ['localtime', 0], ['serial', ''], ['stdvga', 0], ['isa', 0], ['nographic', 0], ['soundhw', ''], ['vnc', 1], ['vncunused', 1], ['sdl', 0], ['xauthority', '/root/.Xauthority'], ['rtc_timeoffset', '0'], ['monitor', 0], ['acpi', 1], ['apic', 1], ['usb', 0], ['usbdevice', ''], ['keymap', ''], ['pci', [['0x0', '0x4', '0x1', '0x0']]], ['guest_os_type', 'default']]], ['device', ['vbd', ['uname', 'phy:/dev/sdb6'], ['dev', 'ioemu:hdb'], ['mode', 'w']]], ['device', ['vbd', ['uname', 'phy:/dev/loop1'], ['dev', 'hda:cdrom'], ['mode', 'r']]], ['device', ['pci', ['dev', ['domain', '0x0'], ['bus', '0x4'], ['slot', '0x1'], ['func', '0x0']]]], ['device', ['vif', ['bridge', 'xenbr0'], ['type', 'ioemu']]]])

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1637) XendDomainInfo.constructDomain

> [2008-10-11 23:18:05 5437] DEBUG (balloon:151) Balloon: 131072 KiB free; need 2048; done.

> [2008-10-11 23:18:05 5437] ERROR (XendDomainInfo:440) VM start failed

> Traceback (most recent call last):

> File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 419, in start

> XendTask.log_progress(0, 30, self._constructDomain)

> File "/usr/lib/python2.5/site-packages/xen/xend/XendTask.py", line 209, in log_progress

> retval = func(*args, **kwds)

> File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 1702, in _constructDomain

> % (bus, dev, func))

> VmError: Fail to assign device(4:1.0): maybe VT-d is not enabled, or the device is not exist, or it has already been assigned to other domain

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1913) XendDomainInfo.destroy: domid=3

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1930) XendDomainInfo.destroyDomain(3)

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1553) No device model

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1555) Releasing devices

> [2008-10-11 23:18:05 5437] ERROR (XendDomainInfo:89) Domain construction failed

> Traceback (most recent call last):

> File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 87, in create

> vm.start()

> File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 419, in start

> XendTask.log_progress(0, 30, self._constructDomain)

> File "/usr/lib/python2.5/site-packages/xen/xend/XendTask.py", line 209, in log_progress

> retval = func(*args, **kwds)

> File "/usr/lib/python2.5/site-packages/xen/xend/XendDomainInfo.py", line 1702, in _constructDomain

> % (bus, dev, func))

> VmError: Fail to assign device(4:1.0): maybe VT-d is not enabled, or the device is not exist, or it has already been assigned to other domain

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1913) XendDomainInfo.destroy: domid=None

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1930) XendDomainInfo.destroyDomain(None)

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1553) No device model

> [2008-10-11 23:18:05 5437] DEBUG (XendDomainInfo:1555) Releasing devices

> ==================DMESG=========================

> root@vdl-linux-10:/var/log/xen# dmesg

> [ 0.000000] Linux version 2.6.24-19-xen (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 21:08:51 UTC 2008 (Ubuntu 2.6.24-4.6-generic)

> [ 0.000000] Command line: root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1

> [ 0.000000] BIOS-provided physical RAM map:

> [ 0.000000] Xen: 0000000000000000 - 00000000f347f000 (usable)

> [ 0.000000] Entering add_active_range(0, 0, 996479) 0 entries of 256 used

> [ 0.000000] end_pfn_map = 996479

> [ 0.206239] DMI present.

> [ 0.206303] Entering add_active_range(0, 0, 996479) 0 entries of 256 used

> [ 0.216000] Zone PFN ranges:

> [ 0.216001] DMA 0 -> 4096

> [ 0.216002] DMA32 4096 -> 1048576

> [ 0.216003] Normal 1048576 -> 1048576

> [ 0.216003] Movable zone start PFN for each node

> [ 0.216004] early_node_map[1] active PFN ranges

> [ 0.216005] 0: 0 -> 996479

> [ 0.216007] On node 0 totalpages: 996479

> [ 0.235583] DMA zone: 56 pages used for memmap

> [ 0.235585] DMA zone: 0 pages reserved

> [ 0.235587] DMA zone: 4040 pages, LIFO batch:0

> [ 0.235734] DMA32 zone: 13567 pages used for memmap

> [ 0.235736] DMA32 zone: 978816 pages, LIFO batch:31

> [ 0.268166] Normal zone: 0 pages used for memmap

> [ 0.268169] Movable zone: 0 pages used for memmap

> [ 0.278090] ACPI: RSDP 000F9990, 0014 (r0 ACPIAM)

> [ 0.278095] ACPI: RSDT BFF90000, 0040 (r1 7514MS A7514200 20080829 MSFT 97)

> [ 0.278099] ACPI: FACP BFF90200, 0084 (r1 7514MS A7514200 20080829 MSFT 97)

> [ 0.278104] ACPI: DSDT BFF905C0, 64FA (r1 A7514 A7514200 200 INTL 20051117)

> [ 0.278107] ACPI: FACS BFF9E000, 0040

> [ 0.278109] ACPI: APIC BFF90390, 006C (r1 7514MS A7514200 20080829 MSFT 97)

> [ 0.278112] ACPI: MCFG BFF90400, 003C (r1 7514MS OEMMCFG 20080829 MSFT 97)

> [ 0.278115] ACPI: SLIC BFF90440, 0176 (r1 7514MS A7514200 20080829 MSFT 97)

> [ 0.278118] ACPI: OEMB BFF9E040, 0072 (r1 7514MS A7514200 20080829 MSFT 97)

> [ 0.278121] ACPI: HPET BFF985C0, 0038 (r1 7514MS OEMHPET 20080829 MSFT 97)

> [ 0.278124] ACPI: SSDT BFF9E5C0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20051117)

> [ 0.278150] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

> [ 0.278152] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

> [ 0.278153] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)

> [ 0.278154] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

> [ 0.278157] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

> [ 0.278162] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23

> [ 0.278164] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

> [ 0.278166] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

> [ 0.278167] ACPI: IRQ0 used by override.

> [ 0.278168] ACPI: IRQ2 used by override.

> [ 0.278169] ACPI: IRQ9 used by override.

> [ 0.278171] Setting APIC routing to xen

> [ 0.278172] Using ACPI (MADT) for SMP configuration information

> [ 0.278179] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)

> [ 0.278184] PERCPU: Allocating 22368 bytes of per cpu data

> [ 0.278205] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 982856

> [ 0.278207] Kernel command line: root=UUID=7159d464-354f-45c3-9dde-d1befe96f7e6 ro console=tty0 pciback.hide=(04:01.0) pciback.permissive iommu=soft vtd=1

> [ 0.278219] Unknown boot option `pciback.permissive': ignoring

> [ 0.278527] Initializing CPU#0

> [ 0.278674] PID hash table entries: 4096 (order: 12, 32768 bytes)

> [ 0.278735] Xen reported: 3007.568 MHz processor.

> [ 0.162979] console [xvc-1] enabled

> [ 0.165005] Console: colour VGA+ 80x25

> [ 0.165007] console [tty0] enabled

> [ 0.168556] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

> [ 0.169665] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

> [ 0.224988] Software IO TLB enabled:

> [ 0.224989] Aperture: 64 megabytes

> [ 0.224990] Kernel range: ffff880006a62000 - ffff88000aa62000

> [ 0.224990] Address size: 27 bits

> [ 0.225226] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

> [ 0.248802] Memory: 3805400k/3985916k available (2531k kernel code, 171588k reserved, 1329k data, 220k init)

> [ 0.315024] Calibrating delay using timer specific routine.. 6016.91 BogoMIPS (lpj=12033823)

> [ 0.315171] Security Framework initialized

> [ 0.315233] SELinux: Disabled at boot.

> [ 0.315294] AppArmor: AppArmor initialized

> [ 0.315354] Failure registering capabilities with primary security module.

> [ 0.315423] Mount-cache hash table entries: 256

> [ 0.315574] CPU: L1 I cache: 32K, L1 D cache: 32K

> [ 0.315679] CPU: Physical Processor ID: 0

> [ 0.315737] CPU: Processor Core ID: 0

> [ 0.315797] SMP alternatives: switching to UP code

> [ 0.316439] Early unpacking initramfs... done

> [ 0.328893] ACPI: Core revision 20070126

> [ 0.329018] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

> [ 0.330921] SMP alternatives: switching to SMP code

> [ 0.331514] Brought up 2 CPUs

> [ 0.000005] Initializing CPU#1

> [ 0.000024] CPU: L1 I cache: 32K, L1 D cache: 32K

> [ 0.000027] CPU: Physical Processor ID: 0

> [ 0.000028] CPU: Processor Core ID: 0

> [ 0.331802] CPU0 attaching sched-domain:

> [ 0.331803] domain 0: span 03

> [ 0.331804] groups: 01 02

> [ 0.331806] CPU1 attaching sched-domain:

> [ 0.331807] domain 0: span 03

> [ 0.331807] groups: 02 01

> [ 0.332218] net_namespace: 120 bytes

> [ 0.332277] failed to set up cpufreq notifier

> [ 0.332595] Time: 20:16:13 Date: 10/11/08

> [ 0.332677] NET: Registered protocol family 16

> [ 0.332890] ACPI: bus type pci registered

> [ 0.332995] PCI: Using configuration type 1

> [ 0.335427] ACPI: EC: Look up EC in DSDT

> [ 0.337929] ACPI: Interpreter enabled

> [ 0.337988] ACPI: (supports S0 S1 S3 S5)

> [ 0.338221] ACPI: Using IOAPIC for interrupt routing

> [ 0.338419] Error attaching device data

> [ 0.338500] Error attaching device data

> [ 0.338581] Error attaching device data

> [ 0.338663] Error attaching device data

> [ 0.342952] ACPI: PCI Root Bridge [PCI0] (0000:00)

> [ 0.345258] PCI: Transparent bridge - 0000:00:1e.0

> [ 0.345360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

> [ 0.345448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

> [ 0.345533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

> [ 0.345589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]

> [ 0.347633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)

> [ 0.348245] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)

> [ 0.348510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)

> [ 0.349121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)

> [ 0.349732] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *6 7 10 11 12 14 15)

> [ 0.350341] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)

> [ 0.350952] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)

> [ 0.351567] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)

> [ 0.352192] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 5B, should be 5A [20070126]

> [ 0.352359] Linux Plug and Play Support v0.97 (c) Adam Belay

> [ 0.352438] pnp: PnP ACPI init

> [ 0.352499] ACPI: bus type pnp registered

> [ 0.354686] pnp: PnP ACPI: found 17 devices

> [ 0.354745] ACPI: ACPI bus type pnp unregistered

> [ 0.354803] xen_mem: Initialising balloon driver.

> [ 0.355099] PCI: Using ACPI for IRQ routing

> [ 0.355159] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

> [ 0.364241] NET: Registered protocol family 8

> [ 0.364311] NET: Registered protocol family 20

> [ 0.364433] AppArmor: AppArmor Filesystem Enabled

> [ 0.364502] ACPI: RTC can wake from S4

> [ 0.036676] Time: xen clocksource has been installed.

> [ 0.376266] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

> [ 0.376339] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved

> [ 0.376416] system 00:07: ioport range 0x4c0-0x4ff has been reserved

> [ 0.376476] system 00:07: ioport range 0x4d0-0x4d1 has been reserved

> [ 0.376537] system 00:07: ioport range 0x800-0x87f has been reserved

> [ 0.376597] system 00:07: ioport range 0x480-0x4bf has been reserved

> [ 0.376657] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved

> [ 0.376718] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved

> [ 0.376779] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved

> [ 0.376842] system 00:0a: iomem range 0xffc00000-0xffefffff could not be reserved

> [ 0.376915] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved

> [ 0.376976] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved

> [ 0.377050] system 00:0e: ioport range 0xa00-0xadf has been reserved

> [ 0.377110] system 00:0e: ioport range 0xae0-0xaef has been reserved

> [ 0.377172] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved

> [ 0.377234] system 00:10: iomem range 0x0-0x9ffff could not be reserved

> [ 0.377295] system 00:10: iomem range 0xc0000-0xcffff has been reserved

> [ 0.377355] system 00:10: iomem range 0xe0000-0xfffff could not be reserved

> [ 0.377416] system 00:10: iomem range 0x100000-0xbfffffff could not be reserved

> [ 0.377486] system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved

> [ 0.377611] pciback 0000:04:01.0: seizing device <=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

> [ 0.377904] PCI: Bridge: 0000:00:01.0

> [ 0.377962] IO window: disabled.

> [ 0.378022] MEM window: fc000000-fe9fffff

> [ 0.378081] PREFETCH window: d0000000-dfffffff

> [ 0.378142] PCI: Bridge: 0000:00:1c.0

> [ 0.378199] IO window: d000-dfff

> [ 0.378260] MEM window: fea00000-feafffff

> [ 0.378320] PREFETCH window: disabled.

> [ 0.378382] PCI: Bridge: 0000:00:1c.1

> [ 0.378438] IO window: disabled.

> [ 0.378498] MEM window: disabled.

> [ 0.378558] PREFETCH window: disabled.

> [ 0.378621] PCI: Bridge: 0000:00:1e.0

> [ 0.378679] IO window: e000-efff

> [ 0.378742] MEM window: feb00000-febfffff

> [ 0.378801] PREFETCH window: disabled.

> [ 0.378877] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16

> [ 0.378993] PCI: Setting latency timer of device 0000:00:01.0 to 64

> [ 0.379020] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17

> [ 0.379137] PCI: Setting latency timer of device 0000:00:1c.0 to 64

> [ 0.379160] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16

> [ 0.379277] PCI: Setting latency timer of device 0000:00:1c.1 to 64

> [ 0.379291] PCI: Setting latency timer of device 0000:00:1e.0 to 64

> [ 0.379314] NET: Registered protocol family 2

> [ 0.412285] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)

> [ 0.412614] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)

> [ 0.413602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

> [ 0.413973] TCP: Hash tables configured (established 262144 bind 65536)

> [ 0.414033] TCP reno registered

> [ 0.424352] checking if image is initramfs... it is

> [ 0.440113] Freeing initrd memory: 23684k freed

> [ 0.447005] audit: initializing netlink socket (disabled)

> [ 0.447082] audit(1223756173.560:1): initialized

> [ 0.447394] VFS: Disk quotas dquot_6.5.1

> [ 0.447467] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

> [ 0.447581] io scheduler noop registered

> [ 0.447640] io scheduler anticipatory registered

> [ 0.447698] io scheduler deadline registered

> [ 0.447763] io scheduler cfq registered (default)

> [ 0.447968] Boot video device is 0000:01:00.0

> [ 0.448049] PCI: Setting latency timer of device 0000:00:01.0 to 64

> [ 0.448118] assign_interrupt_mode Found MSI capability

> [ 0.448178] Allocate Port Service[0000:00:01.0:pcie00]

> [ 0.448285] PCI: Setting latency timer of device 0000:00:1c.0 to 64

> [ 0.448347] assign_interrupt_mode Found MSI capability

> [ 0.448408] Allocate Port Service[0000:00:1c.0:pcie00]

> [ 0.448428] Allocate Port Service[0000:00:1c.0:pcie02]

> [ 0.448518] PCI: Setting latency timer of device 0000:00:1c.1 to 64

> [ 0.448577] assign_interrupt_mode Found MSI capability

> [ 0.448636] Allocate Port Service[0000:00:1c.1:pcie00]

> [ 0.448654] Allocate Port Service[0000:00:1c.1:pcie02]

> [ 0.448865] Xen virtual console successfully installed as xvc0

> [ 0.448954] Event-channel device installed.

> [ 0.453636] Successfully initialized TPM backend driver.

> [ 0.453815] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 20 (level, low) -> IRQ 20

> [ 0.453934] ACPI: PCI interrupt for device 0000:04:01.0 disabled <-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

> [ 0.470001] Real Time Clock Driver v1.12ac

> [ 0.470186] hpet_acpi_add: no address or irqs in _CRS

> [ 0.470270] Linux agpgart interface v0.102

> [ 0.470669] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

> [ 0.470779] input: Macintosh mouse button emulation as /devices/virtual/input/input0

> [ 0.470913] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

> [ 0.473091] serio: i8042 KBD port at 0x60,0x64 irq 1

> [ 0.473153] serio: i8042 AUX port at 0x60,0x64 irq 12

> [ 0.484304] mice: PS/2 mouse device common for all mice

> [ 0.484406] cpuidle: using governor ladder

> [ 0.484510] NET: Registered protocol family 1

> [ 0.484603] registered taskstats version 1

> [ 0.484722] Magic number: 12:691:295

> [ 0.484783] hash matches device ttyz9

> [ 0.484840] hash matches device ttywc

> [ 0.484913] hash matches device tty28

> [ 0.484982] /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

> [ 0.485062] Freeing unused kernel memory: 220k freed

> [ 0.511687] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

> [ 0.336985] fuse init (API version 7.9)

> [ 0.679253] ACPI: SSDT BFF9E0C0, 0277 (r1 DpgPmm P001Ist 11 INTL 20051117)

> [ 0.679680] ACPI: SSDT BFF9E340, 0277 (r1 DpgPmm P002Ist 12 INTL 20051117)

> [ 0.679984] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]

> [ 0.680150] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]

> [ 0.860971] usbcore: registered new interface driver usbfs

> [ 0.861048] usbcore: registered new interface driver hub

> [ 0.866625] usbcore: registered new device driver usb

> [ 0.872827] USB Universal Host Controller Interface driver v3.0

> [ 0.872926] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16

> [ 0.873047] PCI: Setting latency timer of device 0000:00:1a.0 to 64

> [ 0.873051] uhci_hcd 0000:00:1a.0: UHCI Host Controller

> [ 0.873299] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

> [ 0.873402] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00

> [ 0.873540] usb usb1: configuration #1 chosen from 1 choice

> [ 0.873611] hub 1-0:1.0: USB hub found

> [ 0.873674] hub 1-0:1.0: 2 ports detected

> [ 0.562427] SCSI subsystem initialized

> [ 0.570373] libata version 3.00 loaded.

> [ 0.605484] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

> [ 0.977362] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21

> [ 0.977486] PCI: Setting latency timer of device 0000:00:1a.1 to 64

> [ 0.977489] uhci_hcd 0000:00:1a.1: UHCI Host Controller

> [ 0.977561] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2

> [ 0.977663] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880

> [ 0.977795] usb usb2: configuration #1 chosen from 1 choice

> [ 0.977867] hub 2-0:1.0: USB hub found

> [ 0.977929] hub 2-0:1.0: 2 ports detected

> [ 1.081227] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19

> [ 1.081352] PCI: Setting latency timer of device 0000:00:1a.2 to 64

> [ 1.081356] uhci_hcd 0000:00:1a.2: UHCI Host Controller

> [ 1.081428] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3

> [ 1.081529] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c800

> [ 1.081689] usb usb3: configuration #1 chosen from 1 choice

> [ 1.081760] hub 3-0:1.0: USB hub found

> [ 1.081862] hub 3-0:1.0: 2 ports detected

> [ 1.185214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23

> [ 1.185337] PCI: Setting latency timer of device 0000:00:1d.0 to 64

> [ 1.185341] uhci_hcd 0000:00:1d.0: UHCI Host Controller

> [ 1.185411] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4

> [ 1.185511] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480

> [ 1.185638] usb usb4: configuration #1 chosen from 1 choice

> [ 1.185711] hub 4-0:1.0: USB hub found

> [ 1.185776] hub 4-0:1.0: 2 ports detected

> [ 1.289254] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19

> [ 1.289377] PCI: Setting latency timer of device 0000:00:1d.1 to 64

> [ 1.289380] uhci_hcd 0000:00:1d.1: UHCI Host Controller

> [ 1.289450] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5

> [ 1.289544] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400

> [ 1.289669] usb usb5: configuration #1 chosen from 1 choice

> [ 1.289742] hub 5-0:1.0: USB hub found

> [ 1.289804] hub 5-0:1.0: 2 ports detected

> [ 1.393225] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

> [ 1.393361] PCI: Setting latency timer of device 0000:00:1d.2 to 64

> [ 1.393364] uhci_hcd 0000:00:1d.2: UHCI Host Controller

> [ 1.393436] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6

> [ 1.393536] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080

> [ 1.393660] usb usb6: configuration #1 chosen from 1 choice

> [ 1.393731] hub 6-0:1.0: USB hub found

> [ 1.393793] hub 6-0:1.0: 2 ports detected

> [ 1.425151] usb 3-1: new full speed USB device using uhci_hcd and address 2

> [ 1.163349] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18

> [ 1.163502] PCI: Setting latency timer of device 0000:00:1a.7 to 64

> [ 1.163505] ehci_hcd 0000:00:1a.7: EHCI Host Controller

> [ 1.163581] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7

> [ 1.167567] ehci_hcd 0000:00:1a.7: debug port 1

> [ 1.167632] PCI: cache line size of 32 is not supported by device 0000:00:1a.7

> [ 1.167635] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00

> [ 1.215250] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

> [ 1.215416] usb usb7: configuration #1 chosen from 1 choice

> [ 1.215488] hub 7-0:1.0: USB hub found

> [ 1.215554] hub 7-0:1.0: 6 ports detected

> [ 1.319293] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23

> [ 1.319439] PCI: Setting latency timer of device 0000:00:1d.7 to 64

> [ 1.319443] ehci_hcd 0000:00:1d.7: EHCI Host Controller

> [ 1.319516] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8

> [ 1.323497] ehci_hcd 0000:00:1d.7: debug port 1

> [ 1.323562] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

> [ 1.323564] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800

> [ 1.339225] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

> [ 1.339372] usb usb8: configuration #1 chosen from 1 choice

> [ 1.339451] hub 8-0:1.0: USB hub found

> [ 1.339514] hub 8-0:1.0: 6 ports detected

> [ 1.443419] ahci 0000:00:1f.2: version 3.0

> [ 1.443440] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19

> [ 1.945215] usb 3-1: device not accepting address 2, error -71

> [ 2.241155] usb 7-5: new high speed USB device using ehci_hcd and address 2

> [ 2.374187] usb 7-5: configuration #1 chosen from 1 choice

> [ 2.048022] usbcore: registered new interface driver libusual

> [ 2.385011] Initializing USB Mass Storage driver...

> [ 2.385142] scsi0 : SCSI emulation for USB Mass Storage devices

> [ 2.385965] usbcore: registered new interface driver usb-storage

> [ 2.386028] USB Mass Storage support registered.

> [ 2.052073] usb-storage: device found at 2

> [ 2.052074] usb-storage: waiting for device to settle before scanning

> [ 2.447155] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode

> [ 2.447242] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part

> [ 2.447327] PCI: Setting latency timer of device 0000:00:1f.2 to 64

> [ 2.447747] scsi1 : ahci

> [ 2.447922] scsi2 : ahci

> [ 2.448079] scsi3 : ahci

> [ 2.448235] scsi4 : ahci

> [ 2.448394] scsi5 : ahci

> [ 2.448551] scsi6 : ahci

> [ 2.448663] ata1: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff100 irq 19

> [ 2.448737] ata2: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff180 irq 19

> [ 2.448808] ata3: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff200 irq 19

> [ 2.448879] ata4: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff280 irq 19

> [ 2.448950] ata5: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff300 irq 19

> [ 2.449021] ata6: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff380 irq 19

> [ 2.923105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

> [ 3.290862] ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133

> [ 3.290934] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 1)

> [ 3.291752] ata1.00: configured for UDMA/133

> [ 3.267086] ata2: SATA link down (SStatus 0 SControl 300)

> [ 3.579069] ata3: SATA link down (SStatus 0 SControl 300)

> [ 3.891053] ata4: SATA link down (SStatus 0 SControl 300)

> [ 4.203034] ata5: SATA link down (SStatus 0 SControl 300)

> [ 4.515017] ata6: SATA link down (SStatus 0 SControl 300)

> [ 4.515163] scsi 1:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5

> [ 4.515297] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16

> [ 5.518940] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode

> [ 5.519025] ahci 0000:02:00.0: flags: 64bit ncq led clo pmp pio

> [ 5.519096] PCI: Setting latency timer of device 0000:02:00.0 to 64

> [ 5.519255] scsi7 : ahci

> [ 5.519425] scsi8 : ahci

> [ 5.519510] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16

> [ 5.519583] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16

> [ 5.838909] ata7: SATA link down (SStatus 0 SControl 300)

> [ 6.158891] ata8: SATA link down (SStatus 0 SControl 300)

> [ 6.159623] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17

> [ 6.159763] PCI: Setting latency timer of device 0000:02:00.1 to 64

> [ 6.160528] scsi9 : pata_jmicron

> [ 6.161032] scsi10 : pata_jmicron

> [ 6.161370] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17

> [ 6.161433] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17

> [ 6.500943] Driver 'sd' needs updating - please use bus_type methods

> [ 6.501046] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)

> [ 6.501118] sd 1:0:0:0: [sda] Write Protect is off

> [ 6.501180] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

> [ 6.501191] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

> [ 6.501293] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)

> [ 6.501360] sd 1:0:0:0: [sda] Write Protect is off

> [ 6.501421] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

> [ 6.501432] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

> [ 6.501508] sda: sda1 sda2 sda3

> [ 6.520699] sd 1:0:0:0: [sda] Attached SCSI disk

> [ 6.523368] sd 1:0:0:0: Attached scsi generic sg0 type 0

> [ 6.479374] ata9.00: ATAPI: _NEC CD-ROM CD-3002B, C500, max UDMA/33

> [ 6.837482] EXT3-fs: INFO: recovery required on readonly filesystem.

> [ 6.837556] EXT3-fs: write access will be enabled during recovery.

> [ 6.651354] ata9.00: configured for UDMA/33

> [ 6.819220] scsi 9:0:0:0: CD-ROM _NEC CD-ROM CD-3002B C500 PQ: 0 ANSI: 5

> [ 6.819345] scsi 9:0:0:0: Attached scsi generic sg1 type 5

> [ 6.820677] 8139cp 0000:04:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip

> [ 6.820757] 8139cp 0000:04:02.0: Try the "8139too" driver instead.

> [ 6.824588] 8139too Fast Ethernet driver 0.9.28

> [ 6.824679] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21

> [ 6.825672] eth0: RealTek RTL8139 at 0xe800, 00:50:fc:b0:df:a0, IRQ 21

> [ 6.825734] eth0: Identified 8139 chip type 'RTL-8100B/8139D'

> [ 6.829562] Driver 'sr' needs updating - please use bus_type methods

> [ 6.831212] kjournald starting. Commit interval 5 seconds

> [ 7.165074] EXT3-fs: recovery complete.

> [ 7.165411] EXT3-fs: mounted filesystem with ordered data mode.

> [ 6.834085] sr0: scsi3-mmc drive: 1x/52x cd/rw xa/form2 cdda tray

> [ 6.834149] Uniform CD-ROM driver Revision: 3.20

> [ 6.834232] sr 9:0:0:0: Attached scsi CD-ROM sr0

> [ 7.384732] usb-storage: device scan complete

> [ 7.051368] scsi 0:0:0:0: Direct-Access WD 10EAVS External 1.65 PQ: 0 ANSI: 4

> [ 7.052726] sd 0:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)

> [ 7.053725] sd 0:0:0:0: [sdb] Write Protect is off

> [ 7.053795] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00

> [ 7.053797] sd 0:0:0:0: [sdb] Assuming drive cache: write through

> [ 7.054849] sd 0:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)

> [ 7.055848] sd 0:0:0:0: [sdb] Write Protect is off

> [ 7.055918] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00

> [ 7.055920] sd 0:0:0:0: [sdb] Assuming drive cache: write through

> [ 7.055991] sdb:<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5

> [ 12.639511] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

> [ 12.665262] input: PC Speaker as /devices/platform/pcspkr/input/input2

> [ 12.692336] sdb1 sdb2 sdb3 sdb4 < sdb5<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

> [ 12.719699] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

> [ 12.738207] sdb6<6>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

> [ 12.419685] sdb7 sdb8 sdb9 sdb10<6>input: Power Button (FF) as /devices/virtual/input/input3

> [ 12.498759] sdb11 sdb12 >

> [ 12.521028] sd 0:0:0:0: [sdb] Attached SCSI disk

> [ 12.521110] sd 0:0:0:0: Attached scsi generic sg2 type 0

> [ 12.611495] ACPI: Power Button (FF) [PWRF]

> [ 12.611617] input: Power Button (CM) as /devices/virtual/input/input4

> [ 12.675512] ACPI: Power Button (CM) [PWRB]

> [ 12.993231] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1

> [ 13.617972] NET: Registered protocol family 10

> [ 13.618250] lo: Disabled Privacy Extensions

> [ 14.067399] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input5

> [ 14.984065] lp: driver loaded but no devices found

> [ 15.053560] loop: module loaded

> [ 15.166393] Adding 7815612k swap on /dev/sda2. Priority:-1 extents:1 across:7815612k

> [ 15.047671] EXT3 FS on sda1, internal journal

> [ 16.138263] No dock devices found.

> [ 16.886922] ppdev: user-space parallel port driver

> [ 18.073744] Bridge firewalling registered

> [ 18.073883] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.

> [ 17.852956] peth0: link up, 100Mbps, full-duplex, lpa 0xC5E1

> [ 17.861197] device peth0 entered promiscuous mode

> [ 17.861202] audit(1223756191.311:2): dev=peth0 prom=256 old_prom=0 auid=4294967295

> [ 18.202075] eth0: port 1(peth0) entering learning state

> [ 18.206016] eth0: topology change detected, propagating

> [ 18.206020] eth0: port 1(peth0) entering forwarding state

> [ 20.538400] Setting mem allocation to 3977724 kiB

> [ 22.326542] Bluetooth: Core ver 2.11

> [ 22.326593] NET: Registered protocol family 31

> [ 22.326594] Bluetooth: HCI device and connection mana ger initialized

> [ 22.326597] Bluetooth: HCI socket layer initialized

> [ 22.348728] Bluetooth: L2CAP ver 2.9

> [ 22.348732] Bluetooth: L2CAP socket layer initialized

> [ 22.044712] Bluetooth: RFCOMM socket layer initialized

> [ 22.044722] Bluetooth: RFCOMM TTY layer initialized

> [ 22.044723] Bluetooth: RFCOMM ver 1.8

> [ 25.368598] NET: Registered protocol family 17

> [ 38.334563] peth0: no IPv6 routers present

> root@vdl-linux-10:/var/log/xen#

------- End of Original Message -------

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

WARNING - OLD ARCHIVES

xen-users

Re: [Xen-users] XEN 3.2 HVM with VT-D on MSI motherboard NEO3-FR with P4