> Nemeth,
>
> Have you tested GPL PV with Xen-3.3 and your Windows 2k3 in a HVM
> stubdomain?
>
> What is the best to virtualize Windows in Xen-3.3, normal HVM with
> GPL PV drivers or Xen-3.3 HVM Stubdom without GPL PL?
>
> Thiago
>
> 2008/9/26 Nemeth, Tamas <
nice@xxxxxxxxxxxxxxx>
>
>
> > Because I follow the guide:
> >
http://wiki.xensource.com/xenwiki/XenWindowsGplPv
> > which say's:
> >
> >
> >
> > In your machine configuration, make sure you don't use the
> ioemu
> > network driver. Instead, use a line like:
> >
> > vif = ['']
>
> OK, I've already said that I think they only want to explain
> that you
> have to omit the "type=ioemu" and "model=rtl8139/ne2k_pci"
> directives,
> in order to turn that virtual NIC into a paravirtualized one
> instead of
> a fully virtualized. I've tested it on xen 3.3.0 and Windows
> 2k3
> enterprise with Xen PV Drivers 0.9.11-pre17, and it works! The
> MAC
> address of the virtual card is exactly the same I set to.
> Here's the
> config:
>
> name="vw-storman2"
> uuid="7b77d277-e99a-e25b-3652-61e936f78abb"
> memory=1024
> vcpus=1
> >
> >
> >
> >
> >
> localtime=1
> timer_mode=1
>
> builder="hvm"
> device_model="/usr/lib/xen/bin/qemu-dm"
> kernel="/usr/lib/xen/boot/hvmloader"
> boot="c"
> disk=[ 'phy:/dev/mapper/vw-storman2,hda,w' ]
> vif=[ 'mac=00:16:3e:0b:e9:5a,bridge=eth0', ]
> #
> vif=[ 'mac=00:16:3e:0b:e9:5a,model=rtl8139,type=ioemu,bridge=eth0', ]
> keymap="hu"
> stdvga=0
> vnc=1
> vncunused=0
> vncdisplay=27
> apic=1
> acpi=1
> pae=1
>
> usb=1
> usbdevice='tablet'
>
> serial="pty"
>
>
>