| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] Networking problems on opensuse 10.3 (Closed)
Hi,
Finally I got the solution.
It is very simple.
I just need to update my e1000 driver!
The built-in e1000 version 7.6.5 has the problem.
So I upgrade it to 7.6.15.4.
After reboot, I got peth0, vif0.0, xenbr0 ....everything that didn't come out
before.
And I can access the Internet now.
http://lists.xensource.com/archives/html/xen-users/2007-08/msg00839.html
So if you got the similar problem as the above link and mine, you can try to
upgrade your driver.
That might work.
Thanks for all the helps.
Regards,
- Tommy
----------------------------------------
> From: tommy24@xxxxxxxx
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Mon, 22 Sep 2008 19:44:33 -0700
> Subject: [Xen-users] Networking problems on opensuse 10.3
>
>
> Hi,
>
> I am still stuck with the network problem.
> I searched the archive of maling list and found an user has the same problem.
> http://lists.xensource.com/archives/html/xen-users/2007-08/msg00839.html
> And the reply suggests to execute "ethtool -K eth0 tx off "
> When I executed it, nothing happens. Should I execute this command at boot
> time?
> How can I do that?
> So I didn't get the answer from that thread.
> Here is my output of ifconfig:
>
> eth0 Link encap:Ethernet HWaddr 00:30:48:63:72:76
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:9624 errors:0 dropped:0 overruns:0 frame:0
> TX packets:4042 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:3466249 (3.3 Mb) TX bytes:799201 (780.4 Kb)
> Base address:0x2000 Memory:d8020000-d8040000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:150 errors:0 dropped:0 overruns:0 frame:0
> TX packets:150 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:10904 (10.6 Kb) TX bytes:10904 (10.6 Kb)
>
> xenbr0 Link encap:Ethernet HWaddr 00:30:48:63:72:76
> inet addr:143.215.206.12 Bcast:143.215.207.255 Mask:25Actually, I
> want to make domains can communicate with each other, suck like uploading
> files to another domain. I really don't know how to achieve this without
> bridging.5.255.252.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:5626 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2024 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0Actually, I want to make domains can
> communicate with each other, suck like uploading files to another domain. I
> really don't know how to achieve this without bridging.
> RX bytes:1621821 (1.5 Mb) TX bytes:399985 (390.6 Kb)
>
> As you can see, no peth0 and vif0.0.
>
> The output of brctl show
> bridge name bridge id STP enabled interfaces
> xenbr0 8000.003048637276 no eth0
>
> No vif interface.
>
> Does anyone have the same problem?
> This problem is quite annoying.
> Actually, I want to make domains can communicate with each other, suck like
> uploading files from Dom 0 to Dom 1. I really don't know how to achieve this
> without bridging.
> If you have any workaround solution, please kindly let me know.
> I have to use opensuse 10.3 with xen. No other limitations.
> Any response is appreciated. Thanks again.
> _________________________________________________________________
> Want to do more with Windows Live? Learn “10 hidden secrets” from Jamie.
> http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!550F681DAD532637!5295.entry?ocid=TXT_TAGLM_WL_domore_092008
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_________________________________________________________________
See how Windows Mobile brings your life together—at home, work, or on the go.
http://clk.atdmt.com/MRT/go/msnnkwxp1020093182mrt/direct/01/
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home