RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12

["James Harper" <james.harper@xxxxxxxxxxxxxxxx>]

> James Harper schreef:
> > No idea. What does lspci -v tell you? Mine says:
> >
> > 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
> > Gigabit Ethernet PCI Express (rev 21)
> >         Subsystem: Hewlett-Packard Company Device 7032
> >         Flags: bus master, fast devsel, latency 0, IRQ 18
> >         Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
> >         Capabilities: [48] Power Management version 2
> >         Capabilities: [50] Vital Product Data <?>
> >         Capabilities: [58] Message Signalled Interrupts: Mask-
64bit+
> > Queue=0/3 Enable-
> >         Capabilities: [d0] Express Endpoint, MSI 00
> >         Kernel driver in use: tg3
> >         Kernel modules: tg3, ipmi_si
> >
> >
> 06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
> Gigabit Ethernet PCI Express (rev 21)
>         Subsystem: Hewlett-Packard Company NC320i PCIe Gigabit Server
> Adapter
>         Flags: bus master, fast devsel, latency 0, IRQ 17
>         Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
>         Capabilities: [48] Power Management version 2
>         Capabilities: [50] Vital Product Data
>         Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/3 Enable-
>         Capabilities: [d0] Express Endpoint IRQ 0
> 
> That's all, no more lines like yours..? The system (Debian) is
up-to-date.

Hmmm... I am more-or-less running Lenny now, not Etch as I may have
previously mentioned. Maybe I have a later version of lspci than you? It
will still be the same kernel though.

What does 'uname -a' tell you?

James

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users