Hi All,
I for the life of me cannot get bridging to work with Xen on an HVM in
CentOS 5.2 x86_64 and Xen 3.2.1. I've searched the old threads but
nothing seems to cover what I'm running into. When I comment out the
respective "vif =" line in the python configuration file, the HVM boots
up fine. (Windows XP SP3 in this case).
The error in xend.log shows the following error:
Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
Here is my ifconfig upon boot of the system:
eth0 Link encap:Ethernet HWaddr 00:1C:C0:2F:97:89
inet addr:192.168.3.39 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::21c:c0ff:fe2f:9789/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10473 errors:0 dropped:0 overruns:0 frame:0
TX packets:11410 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:628152 (613.4 KiB) TX bytes:9652259 (9.2 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2397 errors:0 dropped:0 overruns:0 frame:0
TX packets:2397 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3258838 (3.1 MiB) TX bytes:3258838 (3.1 MiB)
peth0 Link encap:Ethernet HWaddr 00:1C:C0:2F:97:89
inet6 addr: fe80::21c:c0ff:fe2f:9789/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10608 errors:0 dropped:0 overruns:0 frame:0
TX packets:14062 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:804062 (785.2 KiB) TX bytes:9828573 (9.3 MiB)
Memory:e0580000-e05a0000
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:94 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:17355 (16.9 KiB)
Here is my "brctl show" after boot:
Bridge name bridge id STP enabled interfaces
eth0 8000.001cc02f9789 no peth0
virbr0 8000.000000000000 yes
Not sure where to start looking. I've tried "virbr0", "peth0" and
"eth0" under the vif line with the same error message. I must be
missing something. Help! Thanks in advance!
Cheers,
Daniel
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home