WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] xm console does not return a console

To: "Kumar, Venkat" <Venkat.Kumar@xxxxxxx>
Subject: Re: [Xen-users] xm console does not return a console
From: "piyush masrani" <masrani.piyush@xxxxxxxxx>
Date: Tue, 24 Jun 2008 15:13:45 +0530
Cc: "xen-users@xxxxxxxxxxxxxxxxxxx" <xen-users@xxxxxxxxxxxxxxxxxxx>
Delivery-date: Tue, 24 Jun 2008 02:44:31 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to :subject:cc:in-reply-to:mime-version:content-type:references; bh=O5S6elMjZDRkBUKAyIiJe5u8OUmrwPh4nirLTY0Wgqc=; b=nWkn65Gbxg+YKgPMfbBjuO+r/GelEWx8XRQKMrlhHi4/3yTKaUBus30IIKOpPzSd6K a7H1/YvJbuMQLFo6X5fMDO5oSRdGwrRVwYVtJfIAtk5KOhsJyBE/gqdSFUfI5iZeRRQ6 O44rd2oepYkl/to7LsdfDRV/Cke7wf+Dr8D5s=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version :content-type:references; b=LoLgcI9AGhsqW0G7w0MNJ/9mTCeb7AVSxazDI/XRF4wO/F2nB+81zWv7dqCe6JtW6l 2TUXqSf3B105Yg/z6UyBdUFqMWDdFICVxI7qxE3JXeFAZPVppp9qvUoOq30S3CgqBSLD Jj1cFur3EK2QeDeyzU/cXF1ncGJvw31S/y7Bs=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <532F993CC2E6654CADFE057ADC6C2FA31B7E65109E@xxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <aefb6ea00806240224w5a518ecve71bdcb96b38f10b@xxxxxxxxxxxxxx> <532F993CC2E6654CADFE057ADC6C2FA31B7E65109E@xxxxxxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Where should i use this loopback address? in vncviewer? it is not working... My Dom0 has IP 10.105.41.15...(10.105.41.104 is IP of the guest domain...how is it related with eth0 IP? i didnt get that...)
i had not attached the files, i had copy-pasted the contents... Attaching the files herewith...

On Tue, Jun 24, 2008 at 3:03 PM, Kumar, Venkat <Venkat.Kumar@xxxxxxx> wrote:

Use loopback address and not the eth0 IP.

Try 127.0.0.1 instead of 10.105.41.104.

I couldn't see your configuration file in the email.

 

================================

Venkata Kumar Duvvuru,

LSI Engenio,

Adv. Development,

Bangalore.

Mob: +91-9880318542

Off : +91-80-41978700 ( Extn : 3544 )

================================


From: piyush masrani [mailto:masrani.piyush@xxxxxxxxx]
Sent: Tuesday, June 24, 2008 2:54 PM


To: Kumar, Venkat
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] xm console does not return a console

 


I tried out both of these commands
vncviewer 10.105.41.104:5900
vncviewer 10.105.41.104:5901
Both are giving the above error...

xen config file
#
# /etc/xen-tools/xen-tools.conf
#
#  Global configuration file for the scripts included with Xen-tools.
#
#  Values may be set here so they don't need to be specified upon the
# command line.
#
# Steve
# --
#



#
##
#  Output directory for storing loopback images.
#
#  If you choose to use loopback images, which are simple to manage but
# slower than LVM partitions, then specify a directory here and uncomment
# the line.
#
#  New instances will be stored in subdirectories named after their
# hostnames.
#
##
# dir = /home/cse/Desktop/MTP
dir = /home/mounted
#
##
#
# If you don't wish to use loopback images then you may specify an
# LVM volume group here instead
#
##
# lvm = skx-vg


#
##
#
#  Installation method.
#
#  There are four distinct methods which you may to install a new copy
# of Linux to use in your Xen guest domain:
#
#   - Installation via the debootstrap command.
#   - Installation via the rpmstrap command.
#   - Installation by copying a directory containing a previous installation.
#   - Installation by untarring a previously archived image.
#
#  NOTE That if you use the "untar", or "copy" options you should ensure
# that the image you're left with matches the 'dist' setting later in
# this file.
#
#
##
#
#
# install-method = [ debootstrap | rpmstrap | copy | tar ]
#
#
install-method = debootstrap

#
# If you're using "copy", or "tar" you will need to specify the
# source location to copy from, or the source .tar file to unpack.
#
# You may specify that with a line such as:
#
# install-source = /path/to/copy
# install-source = /some/path/img.tar
#
#

#
##
#  Command definitions.
##
#
# The "debootstrap" and "rpmstrap" commands are hardwired into the
# script, but if you wish to modify the commands which are executed
# when installing new systems by a "copy" or "tar" method you can
# do so here:
#
# install-method=copy:
# copy-cmd = /bin/cp -a $src/* $dest
#
# install-method=tar:
# tar-cmd  = /bin/tar --numeric-owner -xvf $src
#
#



#
##
#  Disk and Sizing options.
##
#
size   = 2Gb      # Disk image size.
memory = 64Mb    # Memory size
swap   = 256Mb    # Swap size
# noswap = 1      # Don't use swap at all for the new system.
fs     = ext3     # use the EXT3 filesystem for the disk image.
#dist   = edgy     # Default distribution to install.
dist=feisty
image  = sparse   # Specify sparse vs. full disk images.

#
#  Currently supported and tested distributions include:
#
#   sid          - Debian
#   sarge        - Debian
#   etch         - Debian
#   dapper       - Ubuntu
#   centos4      - CentOS 4
#   fedora-core4 - Fedora Core 4 (codname stentz)
#



##
# Networking setup values.
##

#
# Uncomment and adjust these network settings if you wish to give your
# new instances static IP addresses.
#
 gateway   = 10.105.1.250
 netmask   = 255.255.0.0
# broadcast = 192.168.1.255
#
# Uncomment this if you wish the images to use DHCP
#
# dhcp = 1


##
# Misc options
##

#
# Uncomment the following line if you wish to disable the caching
# of downloaded .deb files when using debootstrap to install images.
#
# cache = no
#

#
# Uncomment the following line if you wish to interactively setup
# a new root password for images.
#
 passwd = 1

#
# If you'd like all accounts on your host system which are not present
# on the guest system to be copied over then uncomment the following line.
#
# accounts = 1
#

#
# Default kernel and ramdisk to use for the virtual servers
#
kernel      = /boot/vmlinuz-`uname -r`
initrd      = /boot/initrd.img-`uname -r`

#
#  The architecture to use when using debootstrap or rpmstrap.
#
#  This is most useful on 64 bit host machines, for other systems it
# doesn't need to be used.
#
# arch=i386
#

#
# The default mirror for debootstrap to install Debian-derived distributions
#
mirror = http://ftp.us.debian.org/debian/

#
# A mirror suitable for use when installing the Dapper release of Ubuntu.
#
# mirror = http://gb.archive.ubuntu.com/ubuntu/

#
#  If you like you could use per-distribution mirrors, which will
# be more useful if you're working in an environment where you want
# to regularly use multiple distributions:
#
# mirror_sid=http://ftp.us.debian.org/debian
# mirror_sarge=http://ftp.us.debian.org/debian
# mirror_etch=http://ftp.us.debian.org/debian
# mirror_dapper=http://archive.ubuntu.com/ubuntu
# mirror_edgy=http://archive.ubuntu.com/ubuntu
# mirror_feisty=http://archive.ubuntu.com/ubuntu
# mirror_gutsy=http://archive.ubuntu.com/ubuntu
mirror = ftp://ftp.iitb.ac.in/os/ubuntu/archives

#
#  Uncomment if you wish newly created images to boot once they've been
# created.
#
# boot = 1
#

#  If you're using a newer version of the Xen guest kernel you will
# need to make sure that you use 'xvc0' for the guest serial device,
# and 'xvdX' instead of 'sdX' for serial devices.
#
# serial_device = tty1 #default
# serial_device = xvc0
#
# disk_device = sda  #default
# disk_device = xvda


This is the config file for the Guest VM.
#
# Configuration file for the Xen instance xen4.example.com, created
# by xen-tools 3.5 on Thu Jun 19 14:26:38 2008.
#

#
#  Kernel + memory size
#
kernel      = '/boot/vmlinuz-2.6.22-14-xen'
ramdisk     = '/boot/initrd.img-2.6.22-14-xen'
memory      = '64'

#
#  Disk device(s).
#
root        = '/dev/hda1 ro'
disk        = [ 'file:/home/mounted/domains/xen4.example.com/disk.img,hda1,w', 'file:/home/mounted/domains/xen4.example.com/swap.img,hda2,w' ]

#
#  Hostname
#
name        = 'xen4.example.com'

#
#  Networking
#
vif         = [ 'ip=10.105.41.104' ]

#
#  Behaviour
#
> on_reboot   = 'restart'
on_crash    = 'restart'




On Tue, Jun 24, 2008 at 2:47 PM, Kumar, Venkat <Venkat.Kumar@xxxxxxx> wrote:

Send the configuration file and the vncviewer command that you used.

 

================================

Venkata Kumar Duvvuru,

LSI Engenio,

Adv. Development,

Bangalore.

Mob: +91-9880318542

Off : +91-80-41978700 ( Extn : 3544 )

================================


From: piyush masrani [mailto:masrani.piyush@xxxxxxxxx]
Sent: Tuesday, June 24, 2008 2:44 PM
To: Kumar, Venkat
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] xm console does not return a console

 

vncviewer is giving an error,
main:      unable to connect to host: Connection refused (111)


Yes, the domain is created, xm list displays the domain in the running state. I am also able to ping it.

xm console or xm create -c shows the following output and then the shell just hangs.



[    0.000000] Linux version 2.6.22-14-xen (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 09:27:26 UTC 2008 (Unofficial)
[    0.000000] Reserving virtual address space above 0xf5800000
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 0000000004800000 (usable)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 72MB LOWMEM available.
[    0.000000] NX (Execute Disable) protection: active
[ 3470.881812] Zone PFN ranges:
[ 3470.881814]   DMA             0 ->    18432
[ 3470.881815]   Normal      18432 ->    18432
[ 3470.881817]   HighMem     18432 ->    18432
[ 3470.881818] early_node_map[1] active PFN ranges
[ 3470.881820]     0:        0 ->    18432
[ 3470.882484] ACPI in unprivileged domain disabled
[ 3470.883347] Allocating PCI resources starting at 10000000 (gap: 04800000:fb800000)
[ 3470.883374] Built 1 zonelists.  Total pages: 18288
[ 3470.883376] Kernel command line: root=/dev/hda1 ro
[ 3470.883531] Enabling fast FPU save and restore... done.
[ 3470.883534] Enabling unmasked SIMD FPU exception support... done.
[ 3470.883536] Initializing CPU#0
[ 3470.883646] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 3470.883669] Xen reported: 2197.798 MHz processor.
[ 3470.883689] Console: colour dummy device 80x25
[ 3470.883771] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 3470.883799] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 3470.883813] Software IO TLB disabled
[ 3470.883817] vmalloc area: c5000000-f53fe000, maxmem 2d800000
[ 3470.884174] Memory: 41628k/73728k available (2071k kernel code, 23848k reserved, 925k data, 200k init, 0k highmem)
[ 3470.884184] virtual kernel memory layout:
[ 3470.884185]     fixmap  : 0xf568f000 - 0xf57ff000   (1472 kB)
[ 3470.884186]     pkmap   : 0xf5400000 - 0xf5600000   (2048 kB)
[ 3470.884187]     vmalloc : 0xc5000000 - 0xf53fe000   ( 771 MB)
[ 3470.884188]     lowmem  : 0xc0000000 - 0xc4800000   (  72 MB)
[ 3470.884189]       .init : 0xc03f3000 - 0xc0425000   ( 200 kB)
[ 3470.884189]       .data : 0xc0305dfe - 0xc03ed544   ( 925 kB)
[ 3470.884190]       .text : 0xc0100000 - 0xc0305dfe   (2071 kB)
[ 3470.884207] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 3470.884240] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 3470.951171] Calibrating delay using timer specific routine.. 4397.23 BogoMIPS (lpj=8794464)
[ 3470.951203] Security Framework v1.0.0 initialized
[ 3470.951209] SELinux:  Disabled at boot.
[ 3470.951221] Mount-cache hash table entries: 512
[ 3470.951326] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3470.951332] CPU: L2 cache: 2048K
[ 3470.951344] Compat vDSO mapped to f57fe000.
[ 3470.951351] Checking 'hlt' instruction... OK.
[ 3470.951482] SMP alternatives: switching to UP code
[ 3470.951648] Freeing SMP alternatives: 11k freed
[ 3470.951713] Early unpacking initramfs... done
[ 3470.966728] Brought up 1 CPUs
[ 3470.967202] NET: Registered protocol family 16
[ 3470.969125] Brought up 1 CPUs
[ 3470.969138] PCI: Fatal: No config space access function found
[ 3470.969142] PCI: setting up Xen PCI frontend stub
[ 3470.969504] ACPI: Interpreter disabled.
[ 3470.969510] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 3470.969519] pnp: PnP ACPI: disabled
[ 3470.969745] xen_mem: Initialising balloon driver.
[ 3470.971302] PCI: System does not support PCI
[ 3470.971311] PCI: System does not support PCI
[ 3470.971338] NET: Registered protocol family 8
[ 3470.971341] NET: Registered protocol family 20
[ 3470.971623] NET: Registered protocol family 2
[ 3470.971735] Setting mem allocation to 65536 kiB
[ 3470.972054] Time: xen clocksource has been installed.
[ 3470.984164] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 3470.984230] TCP established hash table entries: 4096 (order: 3, 49152 bytes)
[ 3470.984281] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 3470.984316] TCP: Hash tables configured (established 4096 bind 4096)
[ 3470.984321] TCP reno registered
[ 3470.996250] checking if image is initramfs... it is
[ 3471.020839] Freeing initrd memory: 19028k freed
[ 3471.021115] audit: initializing netlink socket (disabled)
[ 3471.021129] audit(1214298394.020:1): initialized
[ 3471.022471] VFS: Disk quotas dquot_6.5.1
[ 3471.022511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3471.022616] io scheduler noop registered
[ 3471.022620] io scheduler anticipatory registered
[ 3471.022623] io scheduler deadline registered
[ 3471.022634] io scheduler cfq registered (default)
[ 3471.037209] Real Time Clock Driver v1.12ac
[ 3471.037628] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 3471.037806] input: Macintosh mouse button emulation as /class/input/input0
[ 3471.037851] xencons_init: Initializing xen vfb; pass xencons=tty to prevent this
[ 3471.037930] Xen virtual console successfully installed as xvc0
[ 3471.037957] Event-channel device installed.
[ 3471.053833] netfront: Initialising virtual ethernet driver.
[ 3471.054290] PNP: No PS/2 controller found. Probing ports directly.
[ 3471.055109] i8042.c: No controller found.
[ 3471.055214] mice: PS/2 mouse device common for all mice
[ 3471.055324] TCP cubic registered
[ 3471.055342] NET: Registered protocol family 1
[ 3471.055365] Using IPI No-Shortcut mode
[ 3471.055466] xen-vbd: registered block device major 3
[ 3471.055477] blkfront: hda1: barriers enabled
[ 3471.055959] blkfront: hda2: barriers enabled
[ 3471.058875] netfront: device eth0 has copying receive path.
[ 3471.152078] XENBUS: Device with no driver: device/console/0
[ 3471.152184] Freeing unused kernel memory: 200k freed
[ 3471.340616] AppArmor: AppArmor initialized<5>audit(1214298394

.340:2):  type=1505 info="AppArmor initialized" pid=1090
[ 3471.346703] fuse init (API version 7.8)
[ 3471.351733] Failure registering capabilities with primary security module.
[ 3471.380563] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 3471.646522] kjournald starting.  Commit interval 5 seconds
[ 3471.646544] EXT3-fs: mounted filesystem with ordered data mode.
[ 3477.717893] NET: Registered protocol family 10
[ 3477.717972] lo: Disabled Privacy Extensions

 

On Tue, Jun 24, 2008 at 2:21 PM, Kumar, Venkat <Venkat.Kumar@xxxxxxx> wrote:

First of all, Are you sure that your domain is created and booted properly.

If yes, is it a HVM or a PV guest?

Check in xm list whether your domain is created and running.

What does xm create –c show?

If xm list shows your domain and still you are not able to connect to the console.

 

Use a vncviewer to attach to a console.

For example : vncviewer 12.0.0.1:5900

Use 5901 if 5900 is not working.

As you keep creating additional VM's increment the screen number 590x. I guess this helps.

 

Venkat

 

 

================================

Venkata Kumar Duvvuru,

LSI Engenio,

Adv. Development,

Bangalore.

Mob: +91-9880318542

Off : +91-80-41978700 ( Extn : 3544 )

================================


From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of piyush masrani
Sent: Tuesday, June 24, 2008 2:05 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] xm console does not return a console

 

Hi

I have installed xen 3.10 on ubuntu 7.10 (Gutsy Gibbon) through repositories...
I followed the following link:
http://www.howtoforge.com/ubuntu-7.10-server-install-xen-from-ubuntu-repositories

 I am able to create Guest VMs on it by using xen-create-image and able to run them by using xm create. But i am not getting the console of the created VMs( xm console is not working. Not even by using the option -c in xm create)...The shell in which i run these commands don't return any prompt...what should i do?

Thanking in advance

-Piyush

 

 


Attachment: xen-tools.conf
Description: Binary data

Attachment: xen4.example.com.cfg
Description: Binary data

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users